To Top

1959 CJ-5 Yakima, WA No Price


This has a nice half top with some unusual mods.

“59 Willy’s with factory hydrolic snow plow. New carb just needs to be installed. Runs great sold as is.”

1959-cj5-yakima-wa5 1959-cj5-yakima-wa6 1959-cj5-yakima-wa7 1959-cj5-yakima-wa8 1959-cj5-yakima-wa9


To Top

1946 VEC CJ-2A Escanaba, MI $16,000


UPDATE: Still Available.

(08/17/2019) This has a dual master cylinder power booster brake setup.






“1946 Willys, very early civilian, completely restored. Rare column shift. New items Stock: Tub, Fenders, Windshield, Seats, suspension. Rebuilt items: Motor original flat head “Go Devil.” Rebuilt Tranny, Rebuilt Transfer, Rebuilt differentials. Original rims and new tires. New additions to stock that can be easily removed. Overdrive unit, Lock out hubs, Best Top Soft top, Aftermarket Heater, turn signals and lights, LED windshield mounted light, electric wipers, vacuum booster for stock brakes. Frame was sand blasted, treated for future rust and painted. Body was treated for future rust and painted. Way too much work to mention here also have the original tub, additional tranny, motor parts, transfer case, diff parts fuel tanks and body parts.

What don’t work: small oil leak in filter line, Speedometer. The speedo had been changed so we trusted it, alas we shouldn’t have. All new cables though and gear etc.”

To Top

1946 VEC CJ-2A Albert, KS $4995


Has some steering updates (#19399).

“Original 4-cylinder motor, 3 speed transmission, 4 WD, with Chevy Power Steering.
Camo Paint job.”

1946-cj2a-greatbend-ks2 1946-cj2a-greatbend-ks3 1946-cj2a-greatbend-ks4

To Top

CJ-6? Hardtop Traverse City, MI $400


There’s a Meyer hardtop here, but I don’t see enough parts for it to be a CJ-6. Maybe not all the pics are shown.

“Jeep CJ6 hard doors plus some hard top parts. They fit CJ6 and not rusty but are not new. … Is what it is right ?
We all know what it is like owning older Jeeps. I have done my best to offer these at a fair price if not at a cheap one.”

cj6-hardtop-0 cj6-hardtop-1 cj6-hardtop-2

To Top

1946 CJ-2A Gaylord, MI $3200


No pics provided.

“older jeep red in color white canvas top with doors . tow bar . unknown miles text me”


To Top

1950 CJ-3A Yelm, WA $2000


Not sure how much value here given is rolled. May be just a parts vehicle at this point.

1950-cj3a-yelm-wa2 1950-cj3a-yelm-wa3 1950-cj3a-yelm-wa4

“I have a rolled 1950 CJ3. I bought it from the gentlemen who was hit while driving it and subsequentially rolled. I have replaced a few of the panel and worked on some of the mechanical however I do not have the time for it and would like to create space in my carport. It does run and I do have more parts for it and yes I have the title.

Continue reading

To Top

1947 CJ-2A Wesson, MS $1100


Includes an extra chassis.

1947-cj2a-jackson-ms1 1947-cj2a-jackson-ms2

“1947 Willys Jeep CJ2A
Extra frame, rear end, wheels, transmission.”

To Top

1948 CJ-2A Indianapolis, IN $8000


UPDATE: Still Available.

(08/23/2019) Has a rear PTO.

“Willys Jeep CJ2A 1948
Unmolested Original, runs, drives, stops and steers as should. 4 cyl flathead, 3 spd 4wd. $8000.00 obo”

1948-cj2a-ind-in6 1948-cj2a-ind-in7 1948-cj2a-ind-in8 1948-cj2a-ind-in9

To Top

1944 GPW Cottage Grove, OR $4000


Looks rough.

“1944 Ford Jeep, “Willey”. Need a project? Or parts for a current project? $4000 or make an offer.”

1944-gpw-forestgrove-or1 1944-gpw-forestgrove-or2 1944-gpw-forestgrove-or3 1944-gpw-forestgrove-or4

To Top

1946 CJ-2A Salem, AR $950


It doesn’t run.

“1946 Willys Jeep
SBC v8 conversion. I started it on a bottle when I got it. It is not running as is. I don’t know anything else about it or the transfer case. It’s on the rough side, but would make a fun mud truck. bill of sale.
I’m looking for a cash sale but would consider interesting trades.”

1946-cj2a-salem-ar0 1946-cj2a-salem-ar1 1946-cj2a-salem-ar2 1946-cj2a-salem-ar3 1946-cj2a-salem-ar4

To Top

1941 Ford GP Chassis Hendersonville, NC $5000

• CATEGORIES: Bantam-FordGP-WillysMA-EarlyJPs

No pics provided, so can’t verify it is a GP.

“1941 Ford GP Military Jeep rolling chassis, transfer case and body. No engine or transmission, title”

To Top

Newgren Porto-Mill Feed Grinder Brochure

• CATEGORIES: Advertising & Brochures, Features

I published the green version of these (seen below) of this brochure, but not the red/black/white version. This red version really pops.

newgren-porto-mill-brochure-red1-lores newgren-porto-mill-brochure-red2-lores

7-porto-mill-feen-grinder-front-lores 7.1-porto-mill-feen-grinder-back-lores

To Top

1953 CJ-3B Chester, MA $7400


This former Navy jeep has a gov dash plate.

1953-cj3b-chester-ma1 1953-cj3b-chester-ma2 1953-cj3b-chester-ma3 1953-cj3b-chester-ma4

“I am selling a 1953 Jeep Willys CJ3b. Jeep is out of California until 2010 where it made its way to the northeast. Minimal rust, two spots the size of a 5 inch square on both floors by feet. Thats it.

The vehicle was undercoated many years ago, of which is peeling like crazy off the bottom of the tub and fenders. Literally comes off in sheets, by hand. Nice grey gloss paint underneath. That grey is the original grey and I think its called swan grey.

The motor was just gone through, including less than .002 taper on each cylinder, rods, pistons and main bearings are all standard and have never been over sized. Cylinders were honed and new standard rings were installed, only because the original rings had become brittle and I snap a few when removing.

Continue reading

To Top

1948 CJ-2A Rumney, NH $6850


The body has had some work. But, for the price, it is worth a look.





“Parade ready Jeep done up as a US Air Force vehicle. It is a 4×4, 3 speed w/reverse, hi/lo range. Has been converted from 6 to 12VDC with alternator. Gauges work, has windshield wiper and period heaters for driver/passenger. Has a canvas half-top and many other new parts. The original flathead four runs well, new fuel pump, currently needs exhaust work/muffler. Comes with a custom made tow-bar and vehicle cover. Currently registered with Antique plates.
VIN # CJ2A185125…………….a unique ride, and a real head turner.
I am 6’2″ and 230 lbs and don’t fit well into this Jeep, a little too tight. As far as I know, this has only been used for parades since being restored by previous owner a number of years ago, and I have only put about 25 miles on it.”

To Top

1948 Jeepster Rabbit Creek, AK $7500

• CATEGORIES: Jeepster

Looks like a good price, especially for Alaska.

1948-jeepster-rabbitcreek-ak2 1948-jeepster-rabbitcreek-ak3 1948-jeepster-rabbitcreek-ak4

“1948 Willys Jeepster
Older restoration
Runs good
New top
Tagged and licensed to 2021
Clean title”

To Top

CJ-5s & M-38A1s



  1. 1957 CJ-5 Green River, WY $4000:
  2. 1967 CJ-5 Selma, CA $1000:
  3. 1955 CJ-5 Mohrsville, PA $3500:
  4. 1965 CJ-5A Project Mogadore, OH No Price:
  5. 1961 CJ-5 Youngtown, AZ $3000:
  6. 1968 CJ-5 Project Las Vegas, NV $800:


  1. 1963 M-38A1 Durango, CO $4850:
  2. 1952 M-38A1 San Bernardino, CA $3500:
  3. 1960 M-38A1 Menifee, CA $4650:
  4. 1953 M-38A1 Wrightwood, CA $5000:
  5. 1953 M-38A1 Santa Rosa, CA $3250:
  6. 1961 M-38A1 Boring, OR $2700:
  7. 1954 M-38A1 Elk Grove, CA $8000:×4-rock/6958115924.html
To Top

Year? CJ-3A Augusta, ME $3500


Will need a little work.

“Willy’s CJ2A/3A 231 Buick oddfire v6 with hei ignition conversion ,12v gm 1 wire alternator , electric fuel pump and fan runs but could use a tune up , custom headers into supertrapp mufflers, Dana twin stick transfer case, t86 3 speed brand new built by herm the over drive guy(800.00) with t90 internals, 5:38 gear ratio front and rear ( rebuilt),Ramsey pto with Braden pto winch and cable, 32” swampers look new but weather cracked . Will need some minor work to be road worthy but it is 70 years old”

year-cj3a-withrop-me0 year-cj3a-withrop-me1 year-cj3a-withrop-me2 year-cj3a-withrop-me3


To Top

1946 CJ-2A Milton, NH $2250


This has had some body work.

“Here is a rare 1946 CJ2A that you could drive while you finish fixing it up.
Its been converted to 12 volts and it has a GM alternator.
Many spare parts go with it.”

1946-cj2a-milton-nh1 1946-cj2a-milton-nh2

To Top

1952 M-38 Belfair, WA $1650

• CATEGORIES: M-38 • TAGS: , .

It’s a project with a bobcat hood.


“1952 willys jeep project. Getting rid of some projects. Had a buick 215 v8 but it was pulled before I bought it. All the parts are there but it is seized. Very straight with little rust in the floors. Has a pto setup hooked to dana 18 tcase.”

To Top

Willys Plow Petersburgh, NY $100


Looks like a good price.

“7 foot manual adjustable snow plow.. came off a 59 willys.”


To Top

5 8×15 Kelsey Hayes Rims Northern Cal $400

• CATEGORIES: Tires and Rims

Dan tells me he has 5 8×15 (or could be 8×15) Kelsey Hayes Rims for sale in Northern California. Email him at If stamidget @ (remove the spaces around the @) if interested.

To Top

2 1951 CJ-3As Parkman, ME $6000


UPDATE: Still Available.

(08/27/2019) A 3rd part’s jeep is also included.

2-1951-cj3as-parkman-me21 2-1951-cj3as-parkman-me2

“1951 Willys Jeeps CJ3A Both run. Plus a 3rd Jeep basically disassembled, no frame, but has engine,
transmission,transfer case, body parts,etc. Sears aluminum cab w/doors. Many extra 16” rims were sandblasted.
$6000 for all.”


To Top

Year? DJ-5 Williamsfield, OH $5000


This has the DJ-3A convertible windshield.


“No Rust Ca body-fuel lines, brakes, lines axles 3.73 -44/30 Cj3 b engine ,newtires tank etc etc- driving OBO cash”

To Top

CJ-5 Hardtop & Parts Southampton, MA $500


Looks like a good price.

cj5-hardtop-southampton-ma00 cj5-hardtop-southampton-ma0 cj5-hardtop-southampton-ma1 cj5-hardtop-southampton-ma3 cj5-hardtop-southampton-ma4

“I have what seems to be a New Haven CT highway dept. or DPW jeep hard top and doors as well as a hood, tailgate, windshield frame and grill. the hardtop is in decent shape, all of the glass is perfect accept for a one of the small rear windows. The hard doors have glass intact and crank up and down. The windshield frame is in very good condition but the glass is cracked in the middle. the top has roof rails and an orange flasher on top.

I have a lot of early CJ5 parts let me know what you need.
All parts $500 obo”

To Top

1942 GPW Project Albany, NY No Price


It’s a project.

gpw-chassis-albany1 gpw-chassis-albany2 gpw-chassis-albany

“Looking to sell my 1942 Ford GPW project jeep. Attached are photos of it together whole, and in parts (its current state). I’ve invested a lot of time and money into this project, and unfortunately my new job doesn’t allow me much time to work on my project. Looking to get out of the project while I still can and to make back some of the money I invested into it. Here’s the list of everything I have:
-primed GPW frame with the axles still attached, it is sitting on MB leaf springs, and I have extra leaf springs in the garage. Ive got the drive shafts too

Continue reading