To Top

1948 CJ-2A San Diego, CA $5000


UPDATE: Still Available.

(04/28/2019) Remove the top and you could lose this in a grass field.×4/6902151866.html

“1948 Wilys Jeep. Original transfer case, transmission, locking hubs, winch and towbar. Powered with Ford Falcon 170 straight-six. Dad’s old jeep
In family since 1967.”

1948-cj2a-sd-cali1 1948-cj2a-sd-cali2 1948-cj2a-sd-cali3 1948-cj2a-sd-cali4

To Top

Fiberglass CJ-5 Tub and Modified Frame Pittsburg, CA $600


The body looks to be in reasonable shape.



“I have a fiberglass CJ5 tub and frame from a 1966 CJ5. It’s in good overall shape and would make a great replacement tub and frame. The frame has been modified for a small block chevy, or LS motor and will need to be finished. I have a mount kit for the the small block that I can include for $150 as well. It’s brand new and the mount brackets are TIG are welded in. The tub has provisions for brakes and steering like the 72+ cj5’s.

I don’t have any paperwork for the tub. Axles not included.”


To Top

Year? J-54 Mitsubishi Weaverville, Ca $3995


UPDATE: Still Available.

(05/07/2019) Seller will consider offers. Needs work, but looks like it could be early?

year-j54-mitsubishi-sac-ca1 year-j54-mitsubishi-sac-ca2 year-j54-mitsubishi-sac-ca3 year-j54-mitsubishi-sac-ca4

“Mitsubishi J54 Diesel RHD Military Jeep.
For the Jeep collector who has everything……..

License built by Mitsubishi. 4 Cylinder diesel from the factory. Built for the Japanese army (and others) from the 1950’s until the late 1990’s.

Restoration project. Has sat for a number of years. Complete and original. Rust in the usual Jeep places (footwell). Frame is straight and solid. Motor currently does not run but turns over. Parts are available from a number of suppliers. Even has the original Japanese NDTs still on it…….

Looking for offers…..will consider trades or part trades.”

To Top

A Few Pics from Charles

• CATEGORIES: Features, Old Images

Charles is currently vacationing along the Belgian coast. During his trip he spotted these photos on the window of a shop. He noted that “the advertisment NESCAFE on the jeep is belgian coffee – first one liberation of Belgium.”




To Top

Mounting a Hi-Lift Jack

• CATEGORIES: Features

Running out of room to store your Hi-Lift jack? Tom spotted this creative solution.


To Top

1952 CJ-3A Powells Point, NC $5500


Appears in good shape.


1952-cj3a-powellspoint-nc2 1952-cj3a-powellspoint-nc3


“Restored by previous owner and running prior to being garaged a few years ago. Flat head 4 cylinder. Fender is off, but included. Needs new starter which was purchased, but has a different configuration so we did not install. This is an inherited car and we believe the fender was removed to work on the starter. Other new parts included: master cylinder, 4 wheel cylinders, & JC Whitney replacement tail gate. Probably needs new tires.”


To Top

1951 CJ-3A Snohomish, WA $7500


Seems in good shape.

“Original body frame, running gear and original engine. 4 cylinder. New gauges. New brakes. Runs great!”

1951-cj3a-snohomish-was1 1951-cj3a-snohomish-was2 1951-cj3a-snohomish-was3 1951-cj3a-snohomish-was4

To Top

1951 CJ-3A Deltona, FL $8000


Appears sound.

“12volt conversion, lots of new parts,runs decent”

1951-cj3a-deltona-fl1 1951-cj3a-deltona-fl2 1951-cj3a-deltona-fl3 1951-cj3a-deltona-fl4

To Top

1953 M-38A1 Madison, GA $9995

• CATEGORIES: M-38A1 • TAGS: , .

Looks in good shape.

1953-m38a1-atl-ga1 1953-m38a1-atl-ga2 1953-m38a1-atl-ga3 1953-m38a1-atl-ga4

“1953 M38 Willys Military Jeep with 30 caliber replica machine gun and radios. Overall good condition and a head turner! The paint job is probably an 8. The radios worked the last time I tried them however they are designed for 24v system and the Willys was converted to 12v and need more juice to operate fully. There are a few small rusted areas (floor board, battery compartment) and I can get additional photos if you have serious interest. The windshield does not have wipers. The siren is not currently working. I’m not sure if its a wiring, motor issue or just needs some tlc. It is very loud however when it works. I put a new carburetor on it and have the original. If it sits for a short time I usually have to put a little fuel in the carb to start it. It runs well and has been used in parades, festivals and ice cream runs in town but just don’t use it that much anymore since I moved”


To Top

1963 CJ-5 Tuckerton, NJ $1500


It runs, but needs brakes. It appears worth a look.

“63 Willys Jeep. Runs,have title. No brakes. It’s a project Jeep.
Reese tow bar *NOT* included.”

1963-cj5-tuckerton-nj1 1963-cj5-tuckerton-nj2 1963-cj5-tuckerton-nj3 1963-cj5-tuckerton-nj4

To Top

1975 CJ-6 Wahkiacus, WA **Status Unknown**


UPDATE: **Status Unknown** Was $3450.

(09/14/2018) May need another body.


“n 2015 I bought the CJ6 I replaced the cylinder head and the crankshaft rod and main bearings. Replaced all the brake shoes, wheel bearings, grease seals, drums and u joints, front brake lines. 5 new Goodyear Wrangler tires and steel rims. Other NEW items replaced; wiper motor and arms; original steel fuel tank and sender; OEM gauges; radiator; front and rear 3″ leaf springs; 4 shock absorbers; 60 amp single wire alternator; two batteries; electric winch; auxiliary fuel tank, starter motor and heavy duty relay. Installed; the receiver, full roll cage; bull bar; farm jack; front, side and rear auxiliary lighting; roof and rear storage racks electric fan; seats; 3 point seat belts. Serviced the gear boxes. Additional items included tire chains; snatch block and 100 feet of recovery cable; tree saver, 2 shackles; starter motor; 2 stainless steel locking door handles; windshield gasket; recovery ramps The original owner never used the Jeep for any extensive 4 wheeling so the drive train is in excellent condition. There is some rust in several body panels. Email me for more pictures about rust areas.”

To Top

1942? MB? Keizer, OR $1200


Has an MB grille and a CJ-2A windshield. Can’t tell much more from the pic.

“42 willys needs minor fixes to run and drive soft top and doors 1200 cash only no trades”


To Top

Year? CJ-2A Lakeland, FL $2500


It’s listed as a 1943, but looks like a 2A.


“Original motor running gear motor runs good body has some rust but not bad…4wd works great will climb over or through just about anything you put to the test…you can own a piece of history with this jeep i’m asking 2500 obo please message me if ur interested tranny”


To Top

1947 CJ-2A Parts Jeep Battle Ground, WA $500


Not sure how much value is here. but seems like $500 worth. No title.


“Cj2a Jeep with mods
Big project but with some good parts
Hood, windshield, gate, wheels
Has installed a ford straight 6 , no overdrive
transmission t114
Not running
cannot find title ,”


To Top

Koenig Model 320 Hardtop Pine, ID $400


Needs glass.

“Willy’s metal full jeep top, cab, Koenig, model 320, came off a cj3a, but might fit others, needs glass but has one of each for patterns, located in Pine, an hour from Mtn Home., comes apart easily to haul in pickup.”

koenig-hardtop-pine-id1 koenig-hardtop-pine-id2 koenig-hardtop-pine-id3

To Top

MB/GPW Tub Cornelius, OR $500


Has mods.

mb-tub-cornelius-or2 mb-tub-cornelius-or

“mid 1940’s
tub, grill and hood

the dash is unmodified and so is the grill, everything else is reproduction or modified
Great wheeler or rock crawler projec”


To Top

1947 CJ-2A Hanover County, VA $9500


UPDATE: Still Available.

(05/26/2019) Runs and drives.

1947-cj2a-hanovercounty-va2 1947-cj2a-hanovercounty-va3 1947-cj2a-hanovercounty-va4

“Selling my 1947 Willys Jeep CJ2A. Don’t know too much about the history of it but I’ve owned it for a couple of years. Flathead 4 cylinder motor. I’ve done some work on it, wasn’t running when I bought it. New water pump, new copper head gasket along with a used head that I had magnafluxed at NAPA machine shop and it checked out fine with no cracks. The head it came with was cracked and caused coolant to get into the oil. It’s a 12 volt electrical system. Just installed a new carburetor because the one it came with didn’t have an accelerator pump and caused it to bog and stumble and not run like it should. Removed the fuel tank and had it cleaned and treated with sealant. Also just installed new ignition points, condenser and internal resister coil. Gauges work including speedometer, volt meter, temp gauge and oil pressure is 40 psi. The transmission shifts, hi and lo range and 4 wheel drive functions like it should. It stops but pulls a little to the right, brake shoes might need adjusted. It’s a smoker so it might need rings but it runs decent like it is. Not interested in trades”


To Top

Saturday @ The Willys Jeep Rally

• CATEGORIES: Features

(Ooops … I meant this to appear on Sunday morning)
Tom Payne and Roger Martin both share some pics from Saturday’s Willys Jeep Rally at Heuston Woods in Ohio.

The first two are from Tom. This one is John Ittel’s CJ-3B:

And this CJ-6 has a Willys industrial powered air compressor in the back:


Roger sent these pictures. According to Rick Riley (the owner), this cool vehicle is a “1979” C-o-m-a-n-d-o (one M) manufactured in Spain. He purchased it from an ex-military gentleman who was stationed in Sicily. When his tour of duty was up in 2006, he had the Comando shipped to the Norfolk VA. The vehicle was stored and not in service from then until Rick purchased it in 2019. The engine is a four-cylinder Perkins, four-speed transmission, full floating rear differential, Model 30 closed knuckle front and 488 gears. It is similar to the U.S. version of this body style Commando which ended in 1971, but there are many large and small differences between the two versions.

willys-rally-hueston-woods-day2-22 willys-rally-hueston-woods-day2-26

Continue reading

To Top

Willys Am Tegernsee’s

• CATEGORIES: Event, Features

This year’s Willys Am Tegernsee convention in Bavaria will be July 13, 2019, I’m still hoping to attend this some day.



To Top

1950 Ad Promoting a New Willys-Overland Dealer

• CATEGORIES: Advertising & Brochures, Features

This December 29, 1950, ad in the Evening Star promoted Sligo Motors, Inc, a new Willys-Overland dealer. Note the Willys-Overland service sign in the lower left corner. I don’t think I’ve seen that one.


To Top

1942 GPW JeepRod Suffield, CT $10,500

• CATEGORIES: GPW (Ford MB), Jeep Rods • TAGS: , .

UPDATE: Price dropped to $10,500.

(02/16/2019) This looks like one of the better Jeep Rod projects.

1942-gpw-jeeprod-ct2 1942-gpw-jeeprod-ct3 1942-gpw-jeeprod-ct4

This is a well designed “FUN CAR”

The engine is a 355 ci Chevy. It has a 327 block and 305 heads. Custom frame with ’32 Ford front spring set up and a model A rear spring with a 9″ Ford rear. The trans is a 200r4.
Is it perfect…no it is not, BUT is it fun to drive…
YOU bet it is
I would consider the car unfinished as the emergency brake has not been hooked up”


To Top

1947 CJ-2A Auburn, NY $5252


UPDATE: Price dropped to $5252

(03/15/2019) This jeep was for sale last October. Not sure if it is the same seller or different.

“1947 Willys—V8 engine—runs great–Does have a soft top. Listening to offers.
Manual / standard transmission
No power steering
No doors—No disc brakes”

1947-cj2a-auburn-ny1 1947-cj2a-auburn-ny2 1947-cj2a-auburn-ny3 1947-cj2a-auburn-ny4

To Top

1947 CJ-2A Sea Cliff, NY $17,895


Someone’s put a lot of time into this militarized CJ-2A build.

“First civilian Jeep, post WWII. Classic CJ2A with military accents. Fully restored, nicely running, garage kept. For the weekend Jeep enthusiast.”

1947-cj2a-seacliff-ny1 1947-cj2a-seacliff-ny2 1947-cj2a-seacliff-ny3 1947-cj2a-seacliff-ny4

To Top

1946 CJ-2A Boonton, NJ $3800


It’s a project.

1946-cj2a-boonton-nj1 1946-cj2a-boonton-nj2 1946-cj2a-boonton-nj3

“1946 CJ2A #75737
Tub and frame are correct.
Motor is an L161
Planned on removing the L161 and installing a correct L134
Got started – ran out of time.
Looking to sell – $3,800.00
Located in North New Jersey”


To Top

1955 CJ-3B Westbrook, CT $3000


UPDATE: Still Available.

(05/13/2019) Matt’s made some progress on this 3B project, but he needs to let it go. It has the L-head installed, but he does have the F-head still.

1955-cj3b-westbrook-ma0 1955-cj3b-westbrook-ma1 1955-cj3b-westbrook-ma2 1955-cj3b-westbrook-ma3

“Up for sale I have a 1955 Willys CJ3B project. This is a project that I started and have run out of time for. The chassis is finished…running, driving and stopping including a complete paint job with chassis saver, new shocks, brakes, steering components and a motor tune up. The engine is an earlier flat head (L head) engine rather than the original overhead valve (F head). Still a great running engine. I do have an original F head engine I could swap into it if you really want originality. T90 three speed transmission and D18 transfer case work perfectly. The pto system that is pictured on the frame is no longer on it.

This Jeep is at the point where it needs body and paint work. The body has been patched and strengthened but needs finish welding and grinding to be ready for paint. All of the sheet metal is currently just sitting on the frame nothing is bolted down. It is not drivable the way it sits.

I have 95% of everything for it the only things you need to get are seats, new tires, windshield gasket, hardware such as nuts and bolts and possibly a better tailgate. All of the small parts that arent pictured are in boxes in my garage and I can tell you exactly where everything is.

Body tags are intact and it is sold with a bill of sale only. No title. If you are in CT thats not a problem. If you are interested give me a call or text and I can answer any more questions you may have. I am asking $3000. I have more into the chassis than that. I may consider trades for other early flatfender Jeeps preferably ones with original paint. If the ad is still posted, it is still available. Thank you

Pictures show current state, finished frame and what it looked like before disassembly. “