To Top

1952 M-38 Body Tucson, AZ $200

• CATEGORIES: Body Parts, M-38

Price is right. I’ve seen much worse for more money.

https://tucson.craigslist.org/pts/d/tucson-willys-m38-body-1952/6936063183.html

“Stripped body some rust.”

m38-body-tucson-az

 
To Top

1947? Wagon JeepRod Canton, MI $6500

• CATEGORIES: Jeep Rods, Willys Wagons

This has a variety of mods, including suicide doors. But, I don’t understand why the seller didn’t clean off the tree droppings before taking the pics?

https://detroit.craigslist.org/wyn/cto/d/canton-1947-willys-overland-rat-rod/6927327118.html

“Up for sale is a 1947 Willys Overland Rat Rod. Florida car. 318 V8 on a s10 chassis.”

1947-jeeprod-wagon-mi1 1947-jeeprod-wagon-mi2 1947-jeeprod-wagon-mi3 1947-jeeprod-wagon-mi4

 
To Top

1947 CJ-2A Lynchburg, VA $500

• CATEGORIES: CJ-2A

Maybe some value here?

https://lynchburg.craigslist.org/atq/d/appomattox-1947-willys/6925705741.html

“1947 Willis Jeep all running gear and motor is supposed to run I have never heard it run everything is there 500 or best offer”

1947-cj2a-lynchburg-va9

 
To Top

1967 M-725 Ambulance Marysville, OH $2000

• CATEGORIES: Other 4x4s

Looks like an interesting project.

https://www.facebook.com/marketplace/item/454442148710854/

“Has a small block Chevy. Hasn’t tan in probably 20+ years. Bunks included, needs some work. Fuel tank in bunk area ready to be installed.”

m725-ambulance1 m725-ambulance2 m725-ambulance3

 
To Top

1953 CJ-3B Appleton, WI $4995

• CATEGORIES: CJ-3B • TAGS: .

UPDATE: Still Available. 

https://appleton.craigslist.org/for/d/appleton-1953-willys-jeep/6941400029.html

(01/30/2019) “1953 Willy’s CJ3B 4 Cyl L Head 3 spd 4 WD 62,000 miles. Brakes and tires ok. I have been plowing with it this winter. Frame is good. Steel top and doors are solid. $4995 Clean title.”

1953-cj3b-appleton-9

1953-cj3b-appleton-wi32 1953-cj3b-appleton-wi3

 
To Top

2 1951 CJ-3As Plus/3rd Jeep Smithfield, ME $6000

• CATEGORIES: CJ-3A

Glenn shared this ad. Could be a good price. Both run.

https://maine.craigslist.org/for/d/cambridge-1951-willys-jeeps-2/6943323806.html

2-1951-cj3as-smithfield-me1 2-1951-cj3as-smithfield-me2

“1951 Willy’s Jeeps CJ3A Both run. Plus a 3rd Jeep basically disassembled, no frame, but has engine,
transmission,transfer case, body parts,etc. Sears aluminum cab w/doors. Many extra 16” rims were sandblasted.
$6000 for all. No trades.”

 
To Top

1945 MB Sacramento, CA $6000

• CATEGORIES: MB

The frame might be twisted (or could be a funky camera distortion … see second pic).

https://yubasutter.craigslist.org/cto/d/west-sacramento-1945-willy/6940445206.html

“has been sitting in closed storage shed for 20 years, ran when it was parked…”

1945-mb-sacramento-ca1 1945-mb-sacramento-ca2 1945-mb-sacramento-ca3 1945-mb-sacramento-ca4

 
To Top

Brian Chuchua Catalog Pages

• CATEGORIES: Advertising & Brochures, Features

These are the final scans from Brian Chucha’s catalog (see the earlier scans here). I’ll eventually combine these altogether.

Thanks to Maury, I’ve recently purchased a Con-Ferr catalog from the early 1970s which ought to have a whole lot of interesting content, too. I should have some scans of that in early August.

brian-chuchua-catalog-117pg08 brian-chuchua-catalog-117pg09 brian-chuchua-catalog-117pg20 brian-chuchua-catalog-117pg21

Continue reading

 
To Top

Original 1946? Early CJ-2A Brochure on eBay

• CATEGORIES: Advertising & Brochures, Features

This seller has five of these early CJ-2A brochures for $10.99. That’s a real good price.

View all the information on eBay

“This lot offers the early Universal Jeep dealer’s brochure/foldout as shown. It measures 8 1/2 x 10 1/2 inches. It measures 34 inches long when opened. This brochure includes 14 pictures of the Jeep doing heavy-duty farm work. The condition is excellent.”

1946-cj2a-brochureu7

1946-cj2a-brochure8

1946-cj2a-brochure9

 
To Top

Spen Trailer Brochure on ebay

• CATEGORIES: Advertising & Brochures, Features

This brochure that Maury spotted highlights both the model “S” and the model “V”. The seller is accepting offers.

View all the information on eBay

spen-brocure1 spen-brocure2

 
To Top

WANTED: Fiberglass Flattie Body in Southern Ohio

• CATEGORIES: wanted

Randy is hoping to locate a fiberglass Flatfender body or maybe a used metal body if in good shape. Contact him at randycarroll53 @ yahoo.com (no spaces around the “@”) for more info.

 

 
To Top

1950 CJ-3A Grand Marais, MI $5200

• CATEGORIES: CJ-3A

Looks like the engine was neatly installed.

https://up.craigslist.org/cto/d/grand-marais-1950-willys-cj3a-jeep-289/6940955288.html

1950-cj3a-grand-mi1 1950-cj3a-grand-mi2 1950-cj3a-grand-mi3 1950-cj3a-grand-mi4

“Ford 289 CID V8, four speed manual transmission, 4WD, power steering, front disc brakes, seat belts, new seats. Solid frame. Body in fair condition. The engine runs strong and has good oil pressure.
Rebuilt front axle with all new bearings, seals, and rebuilt locking hubs. Complete rebuild of rear axle with new locking center section, bearings and seals. New front brakes with new rotors, calipers, wheel bearings and disc pads. New rear brakes, lines and wheel cylinders. New master cylinder. New oil pan and pickup tube/screen, gaskets and seals. Distributor replaced. Just tuned-up including new MSD plug wires. Several coats of bed-liner inside body tub. New alternator.
It needs new seals in the transfer case, the shifter adjusted or replaced (sometimes shifter sticks), and the tires are old.
As-is, no warranty. Due to the age of the tires, it will need to be trailered home if you are going more than one mile. No trades.”

 
To Top

1948 CJ-2A Luxemburg, WI $7000

• CATEGORIES: CJ-2A • TAGS: .

An unusual paint color choice (unless the jeep is meant to be camouflaged within camo wearing models), but the jeep itself appears solid.

https://greenbay.craigslist.org/cto/d/luxemburg-1948-willys-cj2a-jeep/6940040260.html

1948-cj2a-luxemburg-wi1 1948-cj2a-luxemburg-wi2 1948-cj2a-luxemburg-wi3 1948-cj2a-luxemburg-wi4

“Runs / Drives / Stops
Has optional rare OVERDRIVE!
4wd and Hilo work
Lockout hubs
Rebuilt transmission
New clutch
HEI distributor(no worrying about points burning up)
New NDT tires
Carb rebuild
Newer battery
New paint job
New seat cushions
Has the matching spare rim and tire
New fuel tank
Good oil pressure
Original oil bath air cleaner
Tool box is solid
Horn works
Wipers work
No death wobble”

 
To Top

1947 CJ-2A Andover, MN $5750

• CATEGORIES: CJ-2A

UPDATE: Price dropped to $5750.

(06/19/2019) Appears worth a look. It does have a rear PTO, though a gearbox is not mounted on the rear.

https://minneapolis.craigslist.org/ank/cto/d/andover-47-cj2a-willys-jeep/6940235374.html

1947-cj2a-andover-md1 1947-cj2a-andover-md2 1947-cj2a-andover-md3 1947-cj2a-andover-md4

“For Sale – For your enjoyment, good running, titled, collector licensed, rebuilt CJ2A. Has original 4 cylinder Go Devil engine still in it. Not sure on odometer as speedo was not working when we got it. Have spent countless hours rebuilding brakes, transmission, transfer case, body, etc. Spent over $1000 for parts. Have purposely left paint in original Luzon Red patina. Have lots of pictures and a list of what parts were replaced.”

 

 
To Top

1980s Racing Buggy Shipshewana, IN $10,000

• CATEGORIES: Other 4x4s

This is a pretty cool racer, especially if you like Pepsi or collect Pepsi collectibles.

https://southbend.craigslist.org/snw/d/shipshewana-1980s-vw-racing-buggy-title/6916642355.html

1980s-vs-racer0

1980s-vs-racer2

1980s-vs-racer4

1980s-vs-racer3

“$10,000 or open for trades. Corvette, Mazda RX7, Willys Jeep.

This is not your grandma’s VW.
Vintage 1980’s Chenowth Magnum racing buggy with rich history. It was officially sponsored by Pepsi. Norris Racing campaigned it in the 1980s-90s NCPS/SODA short course stadium series predecessor to TORC/MWSCL. Then the buggy was bought by Alvarez Racing and lived in Mexico for NORRA desert racing. I bought and shipped it back from Mexico.

Has a US Forestry approved spark arrestor, so you can legally drive at Silver Lake.

Included:
-Titled as 1976 VW Beetle
-Open trailer
-Vintage photographs
-NORRA racing trophies
-Sand paddle wheel set
-Beadlock rear wheel set

Buggy specs:
-Class 12
-Newly rebuilt VW 1776cc high compression engine
-Runs on race or aviation fuel
-VW bus 002 tranny
-Saco steering rack
-King Kong stub axles
-Als header
-Supertrapp S/C stainless steel muffler
-Parker pumper (helmet air system)
-Cutting brake for “skid steer” capability
-4 wheel disc brakes
-Power steering”

 
To Top

1947 CJ-2A Chaska, MN $8800

• CATEGORIES: CJ-2A

Has some updates.

https://minneapolis.craigslist.org/csw/cto/d/chaska-1947-willys-jeep-cj2a/6937766755.html

1947-cj2a-chaska-mn0 1947-cj2a-chaska-mn1 1947-cj2a-chaska-mn2 1947-cj2a-chaska-mn3 1947-cj2a-chaska-mn4

“Original 4 cyl, New Tub , custom bumpers, receiver hitch front/rear, power steering, tilt steering column, new seats and recessed 4 inches for more leg and belly room, new battery, 2 inch lift, new shocks and steering dampener, new exhaust, fender flares. Bed liner entire inside. Clear title and collector plates. Runs and drives great, selling due to lack of space issues! Message me a phone number and I will call you if you prefer.”

 
To Top

1946 CJ-2A? Delano, MN $7500

• CATEGORIES: CJ-2A

UPDATE: Pics now provided.

https://minneapolis.craigslist.org/csw/cto/d/delano-1946-willy-jeep/6936333179.html

“Runs great! Fun to ride in, room for 4.”

1946-cj2a-delano-mn1 1946-cj2a-delano-mn2 1946-cj2a-delano-mn3 1946-cj2a-delano-mn4

 
To Top

1961 CJ-3B Tacoma, WA $5000

• CATEGORIES: CJ-3B

UPDATE: Price dropped to $5000.

(05/21/2019) This might have late model Free-Lock hubs.

https://seattle.craigslist.org/tac/cto/d/tacoma-1961-willys-cj3/6941789456.html

1961-cj3b-tacoma-wash6 1961-cj3b-tacoma-wash7 1961-cj3b-tacoma-wash8 1961-cj3b-tacoma-wash9

“It has a fresh engine, transmission and transfer case. Less than 5 miles on it.
F-134 Hurricane 4 cylinder engine 2.2, Over bored .030 pistons, .020 mains, .010 on the rods
Borg-Warner 3 Speed T-90 Transmission
Spicer / Dana 18 Transfer case

Dana 27 front axle
Dana 44 Rear axle
11 x 2 Drum brake upgrade

** Additional new parts**
New clutch and pressure plate and throw out bearing
Engine and Transmission mounts
One wire alternator conversion
Battery
Carburetor
Fuel Pressure Regulator
Fuel pump
Gas tank
Gas tank sending unit
Points, Condenser, Dist Cap and Rotor, Spark Plugs, Coil
Remote oil filter adapter
Turn signal switch
Headlight Switch

All the time consuming hard work has been done. It runs and drives, but needs a few more items serviced. (ie, axle pinion seals, speedo cable, etc..) Three extra boxes of parts, along with a Weber Carb, four aluminum wheels, and the original engine long block are included with it.

Its 58 years old, yes, there is some body rust. This Jeep is also registered in the survivors section of the CJ3B website. https://cj3b.info/OwnersPhotos.html”

 
To Top

Hobart Welder Wallace, MI $800

• CATEGORIES: Industrial-Welder-Generator

It welds and rolls on a trailer. Has a CJ-2A engine.

https://up.craigslist.org/grd/d/porterfield-hobart-welder-with-willis/6926673293.html

hobart-cj2a-engine-mi0 hobart-cj2a-engine-mi1 hobart-cj2a-engine-mi2

“welder runs good and welds good, has 110 volt outlet to run a hand grinder,with long welding leads on mobile home axle for easy transport”

 
To Top

1953 CJ-3A Solsberry, IN $3000

• CATEGORIES: CJ-3A

It’s a project.

https://www.facebook.com/marketplace/item/422250088377179/

“Ole willys jeep. The picture of the Willy’s is the before the tear down process,the Jeep is currently torn down into 4 parts. Just wanted to see if anyone is interested in it before we put it back together with our own twist.”

1953-cj3a-solsberry-in0 1953-cj3a-solsberry-in1 1953-cj3a-solsberry-in2

 
To Top

Flat Fender Parts Ionia county, MI

• CATEGORIES: Parts

Seller has a variety of parts.

https://swmi.craigslist.org/pts/d/fenwick-willys-flat-fender-parts/6941821849.html

parts-ionia-cty1 parts-ionia-cty2 parts-ionia-cty3 parts-ionia-cty4

“These came from a barn find, many were marked MB , the hoods I believe fit any of the flat fender Jeeps, the little parts are hard to find, latchs, book holder, hinges etc.
All the gear parts look usable.
$350 takes all the hoods and parts in the picture on the trailer.
Not sure what the seats fit, the bench only has some tears but the springs are ok. $50.00
The folding seat has ok but dirty fabric, frame is good too,, NOT sure what it fits, but it is military issue $100.00
The black seat is same as my 79 cj7
Large tent, and lots of field gear
If interested in the other things write for details.”

 
To Top

Year? CJ-3A Green Lake, WI $500

• CATEGORIES: CJ-3A

Not sure how much value is here.

https://appleton.craigslist.org/pts/d/green-lake-cj3a-willys/6942244430.html

“Willys CJ3A, parts only, no title. Transmission is free as well as the transfer case. Frame looks good, tub is junk, engine is froze. $500 or best offer.”

year-cj3a-greenlake-wi1 year-cj3a-greenlake-wi2 year-cj3a-greenlake-wi3
 
To Top

1947 CJ-2A Dassel, MN $2300

• CATEGORIES: CJ-2A

UPDATE: Price dropped to $2300.

(07/23/2019) Jeremiah shared this one. Looks like there’s value here.

https://minneapolis.craigslist.org/csw/pts/d/darwin-1947-cj2a-willys-jeep/6939250602.html

“1947 CJ2A
Runs great
Body isn’t in very good shape
Unique metal top
Straight and solid frame”

1947-cj2a-dassel-mn1 1947-cj2a-dassel-mn2 1947-cj2a-dassel-mn3 1947-cj2a-dassel-mn4

 
To Top

Rare K&K Side Mower in Southern California **SOLD**

• CATEGORIES: Features, Parts

UPDATE: **SOLD** More pics. The mower can include the PTO equipment (or available separately).

This K&K Mower still has it’s data tag and is in good shape. You can learn more about these mowers here: http://www.ewillys.com/2019/05/17/the-k-and-k-mower-patent/#comments

IMG951505IMG951506
k-and-k-mower2 k-and-k-mower3

k-and-k-mower1

 
To Top

Handy Table for Sleeping/Eating

• CATEGORIES: Features, Old Images, Old News Articles • TAGS: .

This article comes from the 1963 issue of Four Wheeler Magazine. Perhaps more interesting to me than the table, which is utilized for sleeping or as a table is the top. The top was modified to accommodate the table, but I’ve not seen a top that also had the rhombus-shaped rear windows. I believe the bumpers may be from Con-Ferr (or were later sold by Con-Ferr).

1963-09-four-wheeler-mag-bed-table-pgs16-17-1 1963-09-four-wheeler-mag-bed-table-pgs16-17-2