To Top

1948 CJ-2A Lakeport, CA No Price


Dean’s selling this nice looking, highly modified 2A. Contact him at
dean @ (remove spaces around the @)

1948-cj2a-ca1 1948-cj2a-ca2 1948-cj2a-ca3 1948-cj2a-ca4 1948-cj2a-ca5 1948-cj2a-ca6

“1948 CJ2A
Crawl ratio:  101 to 1
Engine:  Chevrolet 4.3 V6
Transmission:  GM Muncie Heavy Duty SM-420 4 speed with 7.05 low gear and Novak adapter to transfer
Dana 20 case with Dana 18 3.15 gears with fully synchronized Saturn Overdrive
Custom Front and rear Axle by Ballistic Trux of Rocklin, CA
• Front axle:  1974 Scout Dana AF30 narrowed to 53″, 30 spline ARB with 4.56 gears
• Rear axle:   Dana 44 widened to 53″, 33 spline ARB, 4.56 gears (one piece 4340 axles)
Edelbrock intake manifold, Howell TB fuel injection & K&N Filter
40 LB Flywheel, with 11 inch clutch
Corvette Crossflow radiator w/ 16 in. flex fan and fiberglass shroud
Mallory fuel Pump
105 amp alternator with Optima battery
Oil pan 86 Astro van
Steering box: AGR Super Box 2 with P series pump
Tires:  33″ x 10.5 BFG Mud on 8′ x 15 wheels
8000 lb Warn Winch Model 8274
2″ receiver hitch (rear)
Full skid plate & 1 3/4″  DOM rock guards
Swing peddles with hydraulic clutch, 7” brake booster and dual master cylinders Continue reading

To Top

1949 CJ-3A Greeneville, TN $9500


Looks solid.

I have a 1949 willys CJ-3A I’ve decided to sell. It has been restored to original condition by previous owner. Jeep has a new black soft top from Besttop. This little jeep performs and looks outstanding!”

1949-cj3a-greenville-tn1 1949-cj3a-greenville-tn2 1949-cj3a-greenville-tn3 1949-cj3a-greenville-tn4

To Top

1954 CJ-3B Atlanta, GA $7000


Appears solid.

1954-cj3b-atlanta-ga1 1954-cj3b-atlanta-ga2 1954-cj3b-atlanta-ga3 1954-cj3b-atlanta-ga9

“1954 Willys CJ3B 4×4 2nd year with the Hurricane, overhead valve motor. It has the flat fenders and taller hood. The previous owner had the motor rebuilt and the body is good. It has new seat covers, new water pump, electronic ignition, electric fuel pump, lock-out hubs and good tires.
There are seat belts for 4 and it’s street legal.
Could be restored, hot rodded or driven as is.”

To Top

1948 CJ-2L(?) Anchorage, AK $1500


UPDATE: Price dropped to $1500. Might be a good price if the body is solid.

This has a bobcat hood and looks to be extended similar to CJ-2As. It wouldn’t surprise me to learn that this was originally a Washington State jeep.

“1948 Willys Jeep, V8 Ford 351w, manual transmission, power steering, does not run – electrical problem
$2000 or best offer”


To Top

1950 CJ-3A Spokane, WA Make Offer


UPDATE II: Still Available. 

UPDATE: This is actually the 2nd Oneida hardtop found with a flat fender in the Spokane area (other is here). Maybe someone was converting them at the Air Force Base west of Spokane? 

This top surprised me. It has a date plate! It seems to be some kind of manufactured-for-the-military hardtop. It’s made by the Oneida Products Corp. out of Oneida, New York. The manufacture date is August 1951.




“1953 willys jeep with military topper. Has plow currently on PTO driven winch. Original motor trans… runs great, clutch is out. Let me know your offers.”

To Top

1948 Truck Southwestern VT $7500

• CATEGORIES: Willys Trucks

Has that unique bumper add-on shaped in a WO.×4-jeep/6968910513.html

1948-truck-vt1 1948-truck-vt2 1948-truck-vt3

“For sale – 1948 Willys pickup. Truck runs and drives well and is recently Vermont inspected. Four wheel drive, 4 cylinder Willys Go Devil L head engine, 63HP, 6 volt electrical system, foot actuated push button start, 3 speed column shift, Timken rear axle, Warner T90 3 speed transmission. Patina paint and body. Many new mechanical parts, including wiring harness, clutch, brakes, water pump, hoses, thermostat, 6 volt battery and more. Rebuilt starter. Five new 700-16 vintage-style tires from Miller Tire. Includes many surviving, rarely seen features including functioning Marvel Inverse Oiler, WO front grill guard and kerosene emergency flare. Only selling because we have too many vehicles. $7,500 or best reasonable offer.”

To Top

1955 M-170 Gainesville, FL $6500


UPDATE: Price dropped to $6500.

(08/24/2019) Scott’s got this M-170 for sale.

1955-m170-gainesville1 1955-m170-gainesville2 1955-m170-gainesville3 1955-m170-gainesville4

“1955 JEEP M170 This is a rare bird – rebuilt and in solid shape. As I understand this is a long body M38A1 army jeep and was originally outfitted as troop hauler, radio jeep, or ambulance/medical. May be the early inspiration for the CJ8 Scrambler. Engine rebuilt in 2012. I converted from 24 volt to 12 volt with new starter, alternater, wiring harness, fuse box, head and tail lights, etc. Also has rebuilt carburetor, new fuel pump, lines, fuel filter, steering wheel, horn, new set of tires, rebuilt emergency brake.

Comes with a big winch with remote, tow arms, and a box of random parts (can probably sell on eBay). Seats are new and all have lap belts. Runs, steers, brakes good. Ready for neighborhood drive with kids, grandkids. It does have cracked windshield, but easy to buy kit/replace. Its a rare one and priced to go – so no low ballers please. Clean title.”

To Top

1947 CJ-2A Kannapolis, NC $5000


No pics provided. It’s a project.

“I have a Willys that runs perfect It is off frame right now was going to do restoration then I got Sick
It has original trans rearend and Motor frame is in perfect condition tub needs some pan work and
paint Need Gone I can send pics through my Phone”

To Top

1948 CJ-2A Berryville, VA $5000


It’s a project.

1948-cj2a-berryville-va1 1948-cj2a-berryville-va2 1948-cj2a-berryville-va3

“1948 Willys CJ2A project with VA title.
Rebuilt 134F with Supersonic head
New “corrected” body tub, fenders, windshield frame.
Rebuilt front axle.
Sandblasted and painted frame.
Lots of new parts in boxes, transmission and transfer case still need to be rebuilt.
Some assembly required.
I also have the original body, it’s a “Lefty” only made a couple months.”

To Top

1952 CJ-3A Lewisville, NC


Maybe someone can use these parts.


“1952 CJ3A part out. Rear axle drivers side axle shaft is sold and hub/ drum is sold. Everything else in pictures is available.
Dana 18 transfer case- $175
L-134 Engine-rough- $250
Bellhousing- $50
Body- only bad spot is in the bed- $250
Frame- very straight – $250
Front axle- needs rebuilt- $100
Rear axle minus axle shaft/hub- $50
Rear driveshaft- $50
Steering column- $50
Windshield- glass is pretty good- $150
Hood- $50

Everything is OBO. Text or email for parts not listed.”

To Top

1953 Custom Jeep Fort Lauderdale, FL $3000

• CATEGORIES: Unusual, Willys Trucks • TAGS: .

This is an unusual project. Maybe it’s a swamp rig?





To Top

Flatfender Project Buckley, WA $2700


UPDATE: Still Available.

(08/18/2019) This may be a flat fender body on a later model CJ-5 chassis.

year-flattie-buckley-wa2 year-flattie-buckley-wa3

“Lots done
Dana 30 open knuckle
Ratchet locker
All new front wheel bearings and seals
All brake wheel cylinders are new (4]
Converted to 11 inch brakes from ford truck
New master cylinder
Converted to hydraulic clutch
Front stear with power steering
Newer tires and wheels 33X10.5
Rancho lift kit with Ranchero shocks
Rock sliders that are welded to the frame
Relatively new paint on Jeep painted in John Deere yellow with Implement paint looks okay
The roll bar was just be painted in glossy black
Would rather trade for car or 2wd pu
Might part out
Chevy straight 6 installed ok
I have windshield frame with good glass
And headlight assemblies”

To Top

1956 CJ-6 Pepperell, MA $2400


UPDATE: Still Available.

(04/10/2019) Needs some work.

“-The 1956 runs -drives and stops also needs tub work but has a solid cover and heater asking $2400 please call for appointment also 1961 CJ 5 solid clean engine does not run but have replacement if it’s anything major $3200 with plow-also have complete engine and transfer case complete engine was running when removed last year $800”


To Top

1953 CJ-3A New Albany, IN $500


UPDATE: Price dropped to $500.

May have some value.

“4×4 Needs restoration. Thought someone might want to restore. No title. I was told run but have not heard myself. Tub is rough but frame is good”

1953-cj3a-ky1 1953-cj3a-ky2

To Top

1960 FC-170 New Hampshire No Price

• CATEGORIES: FC150-FC170-M677

This lacks a title.

1960-fc170-nh1 1960-fc170-nh2 1960-fc170-nh3 1960-fc170-nh4

“I have a jeep FC 170 that I picked up with the intention of giving new life.
Sadly, too much life and too many projects have thwarted my intentions.
It was in rough shape when I got it and I haven’t touched it since I unloaded it some years ago. It is a serious undertaking if you were to try to bring this back to life, lots of rust and I don’t believe the engine is reusable though I don’t know that for certain.
I’d like to try to find it a home where it gets some sort of use before its no good to anyone. I wish I had been able to get to it myself.
I’m not sure on the value honestly. That is something I would happily discuss with a seriously interested party. They are tough to find but this one is rough, sadly.
I don’t have a title. It would come with a Bill of Sale, in NH, ME that and a vin verification are all that’s needed to reg to it wasn’t a problem for me. It looks like it was last registered in 2005 in VT.
I’m happy to answer questions but seeing it in person is going to give you the most info I think.

To Top

1948 CJ-2A Mechanicsville, VA $2500


It’s a project. Engine is stuck.

1948-c2ja-mechanicsville-va1 1948-c2ja-mechanicsville-va2 1948-c2ja-mechanicsville-va3 1948-c2ja-mechanicsville-va4

“1948 Willy’s Jeep
90% of original parts
Has been barn stored for 35 years
Body is only setting on the frame
Steering box needs new bearings
Rear drive shaft is disconnected as there is something locked in the engine
There are no brakes
Engine is stuck
Have a Virginia Title in hand

Asking $2,500.00 OBO”


To Top

1949 CJ-3A Southport, NC $6500


UPDATE: Price dropped to $6500.


“Willys CJ3A / M38 Jeep. Runs and drives. NEW: tires, seats, seat frames, 12volt conversion, carburetor, distributer, shocks, wiring harness, gauges, exhaust, fuel pump, fuel tank and more. Original Go Devil engine. Needs some body work, but frame is solid.
Sorry, but gun is not included.”


To Top

1957 CJ-3B Parts Jeep Angola, NY $500


No pics provided.

“Clearing out my garage before winter. Up for sale is a complete rolling chassis from a 1957 Willys Jeep CJ3B. Basically it’s the frame, front/rear diffs with wheels, suspension. There is NO motor, although I do have the original transmission/transfer case combo as well as the drive shafts. I was planning on doing an engine swap, so I also have an Isuzu 1.8L diesel as well as the Isuzu MUA5 manual transmission/transfer case. I went through the entire engine and also resealed/ repainted it. I have a new starter for the diesel engine as well. I also have a set of front/rear narrow track diffs from a CJ5 for it too. As for other parts from the CJ3B I have: the hood, front grille/radiator, seat frames, some electrical parts, gauges, fuel tank, lighting and some other miscellaneous parts. Selling everything together for $500. If you are interested in certain parts separately, let me know.”

To Top

The Story of The Legend

• CATEGORIES: Features

Blaine shared Jeep’s take on the history of the jeep. Of course, the company continues to ignore the importance of Bantam and Ford’s role in the origination of the jeep. One of the odd decisions was to select a photo of a 5 lug DJ-3A as representative of the DJ-3A. The history does include a mention of the DJ-5s and CJ-6s, so that’s good to see.

Also, a blurb about the CJ-6 claims the running gear was heavier duty, but as far as I know, the CJ-6 used the Dana 27 and Dana 44. Am I correct on that?



To Top

1946 CJ-2A Spokane Valley, WA $5900


This may need a new starter. It has a rear PTO setup.

“1946 Jeep Willy’s. In impeccable shape! 4 wheel drive with PTO. Manual stick shift, 4 speed, Ran great but we think the starter just went out. All new vinyl top with no rips or tears. Tires are in great shape! Drop down windshield. We are downsizing and selling our toys”

1946-cj2a-spokanevalley-wa1 1946-cj2a-spokanevalley-wa2 1946-cj2a-spokanevalley-wa3 1946-cj2a-spokanevalley-wa4

To Top

1951 CJ-3A Billing, MT **SOLD**


UPDATE: **SOLD** Was $5000.

Looks in good shape.

“Runs and drives. New metal,seats,gas tank,speakers. 6v system converted to 12. All else stock flat 4. No trades/holds cash takes it. Clean title.”

1951-cj3a-billing-mt97 1951-cj3a-billing-mt98 1951-cj3a-billing-mt99

To Top

1946 CJ-2A Big Fork, MT $7500


Runs and drives.

“I have a 1946 willys cj2a. It has been completely gone through and repainted 3 years ago.”

1946-cj2a-bigfork-mt1 1946-cj2a-bigfork-mt2 1946-cj2a-bigfork-mt3 1946-cj2a-bigfork-mt4

To Top

1943 MB Monument, CO No Price


Looks good from a distance. No up close pics provided.

“Looking to sell, 1943 MB, frame off restoration in ’08-09 and repainted to early war last year(3k miles). Center, step mount and pintil go with it along with the BC620 radio (Modern ham inside) Windshield cover and custom trailer-able full cover. Monument Colorado.”

1943-mb-larkspur-co1 1943-mb-larkspur-co2 1943-mb-larkspur-co3 1943-mb-larkspur-co4

To Top

1958 CJ-6 Lyons, CO $6950


UPDATE: Still Available.

This CJ-6 has the King Seeley 0-8 speedo with the broken pointer (not uncommon to see them broken). I’m surprised to see that speedo in a model as late as 1958, so it wouldn’t surprise me if this was actually an early 1957 model sold as a 1958.

“1958 Willys CJ6 Jeep For Sale.
4WD, original 4 Cylinder engine, full metal hardtop.
Just serviced with new battery, oil and fuel filters, distributor cap, rotor, points, plugs, condenser, plug wires, oil change, fuel and coolant flushes, etc..
Very little rust for a 61 year old jeep!
Ready to go. The perfect little “mountain goat” – ranch, cabin or hunting truck!”

1958-cj6-lyons-colo6 1958-cj6-lyons-colo7 1958-cj6-lyons-colo8


Continue reading

To Top

Year? CJ-3A? Dayton, WA $1000


Seems like there’s value here. No description provided.

year-cj2a-dayton-wa1 year-cj2a-dayton-wa2