Unclear how much value is here.

https://www.facebook.com/marketplace/item/1821858161550787

“Sat in a garage for 5 plus years, sat outside for now about year and half. What i know: Jeep Runs and drives. Will send video of running and driving if you PM me. Only selling because I inherited a jeep and i don’t need two. CLEAN title in hand.

Pros: 8k WARN Winch Disc Breaks on the front Wilwood Master Cylinder with remote reservoirs Steering wheel riser New Steering wheel New Smittybuilt Seats Body is in pretty good shape for the age No rust Inline 6 motor, runs well unsure of history or miles Drop down tow bar Tires in good condition New / Rebuilt starter Title in hand Windshield glass no cracks

Cons: Break lines have lost pressure so a leak needs to be found and fixed. I did have a company do it but lines leaked after about a week and after a few attempts to do it myself it got put on the back burner. Gas pedal is needed- currently just a shaft Needs battery, i have a spare one i might be able to part with”

Only two pics provided.

https://www.facebook.com/marketplace/item/1074846763672447

“46’ Willy. Rolling chassis. The tub is in wonderful condition.  NO motor or trans. NO paperwork as is Located in oakhurst firm on price you’re more than welcome to make an offer. No low ballers. Thanks”

UPDATE: Price dropped to $10,500.

Rare to see a Monroe 3pt in our region.

https://www.facebook.com/commerce/listing/1458035655062799

“CJ2a with Monroe hydraulic 3 point hitch.
Rear pto gearbox.
All new wiring and brakes.
Runs and drives great.
Clean Washington title in my name.”

This was listed at $4800, but that price has been crossed out. Perhaps the seller is taking offers? The front suspension setup is unusual. It appears a bump stop has been added to the rear of the springs, replacing the shackles. It also looks like some kind of block or wedge sits between the springs and the axle.

https://www.facebook.com/marketplace/item/768304708324018/

“Complete frame up restoration project that is very close to being finished. It came from California and is extremely solid. It was taken down to bare metal and there was not a spot of rust anywhere. A skim coat, block, primer, block seal, and painted gray. It’s a 46 CJ2A with CJ5 running gear that has overdrive so it will have no trouble running the freeway. Has a chevy 350. Lot’s of new parts. Part’s alone cost more than the asking price. I have the windshield frame and windshield for it. its painted black. I will not respond to is this still available. Located in napavine Washington. Cash only sale, no trades. First person here with cash takes it home. Change of plans…..I’ll part it out. Let me know what you need. It has a really nice suspension setup. I think I’ll keep the 350 SBC that’s in it for another project.”

Continue reading →

The seller has a lot of money into this, but the jeep remains in pieces. The pic below was taken prior to it being disassembled.

https://www.facebook.com/marketplace/item/244281111765795/

“Hello, I have a 1952 Willys CJ3A project for sale. I have had it for about 25 years now and don’t see myself finishing it anytime soon. So it’s time for it to move on. I have about $12k into it and it’s still in pieces. I bought the replacement panels and $4k in parts (see lists in photos). I also had engine completely gone through, machined, and professionally rebuilt ($3k) with hardened vavle seat so it is good for todays gas. It has a Dana 44 rear axle, original heater, professionally rebuilt front and rear driveshafts, and quite a few spare parts including a spare transmission and transfer case. I also have a full steel hard top (no side doors) and a half cab/doors. Have clean title too. I also attached a couple photos of when it was together. I would like to get $6k because there is $4k in parts on the lists alone, $3k in the engine, plus everything else. Open to offers/trades especially a for 55’-59’ Chevy/GMC truck driver/solid project. Goose neck livestock trailer w/lvg qrtrs.”

There may be value here.

https://www.facebook.com/marketplace/item/961628288318229

“Mostly held together with bondo. Have original engine at mission motor being stored. Is on an open trailer that can sell with it. Trailer will cost $2,000 if added.”

This has a variety of updates, including a Warn OD. Note the various controls installed on the top of the inner windshield.

https://cosprings.craigslist.org/cto/d/colorado-springs-1951-jeep-willys-m38/7682327790.html

“-Ford 289 v8 (rebuilt less than 500mi ago)
-C3 transmission w/ B&M shifter
-T18 transfer case with warn overdrive
-Tires with less than 1000mi
-Rebuilt carb installed with engine rebuild (could use a tune now that engine is breaking in)
-Electric fan
-Vented hood
-Heater
-Electric wipers
-Soft top was installed about 2 years ago and less than 1000mi. Jeep parked under carport since it was installed
-has rear seat
-Front seats don’t match
Jeep runs and drives but could use a carb tune/ choke adjustment and general check over from sitting. Hasn’t been driven more than 100miles in the last year.
I have many spares including a performance intake manifold, spare engine that needs rebuilt, spare carb that needs cleaned and rebuilt, non matching spare wheel and tire, rear tire rack that’s not mounted.
I thought I would use this in the mountains while camping but have barely driven it in the 3+ years I’ve owned it. It’s time to move on and let someone else enjoy it. Asking $6000 OBO”