Needs some work.
“For Sale: 1942-1944 Ford Open Jeep. Clear Texas Blue Title. This is a Jeep that was probably assembled out of many different Jeeps at some point. The frame is MB, M2 mount is in the frame, tub floor shows it, front square cross-member confirms it is a Ford.
The Jeep has a Ford GPW body, shown by the embossings in the tool compartment lids. The windshield frame and front grill are CJ2A/3A stamped “Willys.” The right front fender is Ford GPW.
The L134 Flat head Willys “Go Devil” motor is correct vintage for the jeep, 1944-1951. Continue reading
Seems there’s some value here.
“Selling my Willys project. Bought it from a friend a couple years ago and it’s been sitting with not enough time to work on. I bought a new wire harness new alt, and distributor,12v. Needs work to get going. Ran great before wire harness was cut out. Complete wire harness and book to go with it. Has a PTO transfer case to go along with it as well as 2 other hoods and another set of tires. Frame is in great shape, body is not bad.”
Craig spotted this one. Looks like a good price.
“Jeep mejers white hardtop”
Needs some work. Floors have been patched.
“1946 CJ2 Willys Jeep. Four-wheel-drive. PTO winch. 4 brand-new extra tires. Everything on this jeep works. Emergency brake needs fixed. turn signals need hooked up. Historical plates. Manual transmission. Perfect summer vehicle.”
It’s a project.
“Hunter’s & Outdoorsmen; 1952 Jeep Willy, it is a classic. Great for outdoors. Does need work.”
“1957 Willys Jeep FC150. Clean Ohio Title. Needs complete restoration. Floor pans are rusted out. Bed and Rear fenders are rusted out. Front windshield and stationary side windows are good. Brakes are frozen. This jeep has been sitting in a barn since 1978. Engine oil looks clean and full, but havent tried to start. Drivetrain looks complete. This would make a great project …. – See more at: http://www.jeeptruck.com/mjs/sale17/adm139/adm139.html#sthash.Wrs9RhBu.dpuf”
No pics provided.
“JEEP, M38, 1951 Willis, original Army Jeep, this runs great and is 100% restored to showroom Army issue with no rust or other issues. Converted to 12 volt. Great paint and Army markings, jerry can and spare, shovel and ax carrier, canvas top, all placards, military lug tires in great condition, glass and windshield are perfect. Parade and show ready. ”
There’s some value here.
“I am parting out or will sell 1947 Jeep Willys. Make offer ”
Listed as a 1947, it looks later.
“1947 jeep p/u no motor, tranny, or transfer case.
NO TITLE WILL FILL OUT A BILL OF SALE.
Was going to restore but need the funds.
Asking $800 firm CASH ONLY!!”
No pics, but quite a story. The title is “Girlfriend Pregnant & Wife Found Out – Forces Sale”.
“NEED MONEY FOR ATTORNEY!!!
Selling my 1950 Packard, 1952 Willies Jeep, my prized antique pool table, and my slot machines.
Call for details.”
Could be a fair price.
“Braden winch from 1951 Willys CJ3A Model # 10003/10004”
Parts or project jeep.
“For Sale: CJ2A – 3A. I assume it’s a CJ3A based on windshield frame (3A one-piece) and instruments. No title.
This jeep is a rolling chassis, complete, less motor, transmission and transfer case. I do have the driveshafts.
The Jeep body Tub is extremely rough, borderline for parts–repaired and re-repaired over 70 years of hard life, the frame is about the same, but definitely restorable. Front clip is clean and fully assembled.
First $860 for the entire jeep takes it. All four 16 inch wheels hold air. This Jeep is equipped with Warn lock-out hubs that function perfectly. The rear axle retainer caps are missing some of the retaining bolts. This is a long way from driveable, but a good starter. I’ve got many other spare parts, both CJ and MB / GPW / M38.
CASH ONLY. I can deliver for gas and mileage, but will only do so after the jeep has been paid for in full in person.”
UPDATE: Still Available. Might have a Porter & Reed Top.
(10/06/2016) Runs and drives. Has a box on the cowl.
“1946 Willys Jeep, runs great original engine, three speed, 4×4, still 6volt system. good tires, lights work and has heat. Old jeep but in good condition for the age.“
“I will trade for 14ft dump trailer or 24ft Enclosed trailer only or cash only firm please scammers don’t waste your time or mine i don’t need drama. Please look at pictures for more derails jeep needs work and complete restoration i do have paperwork for Jeep. If you have any questions feel free to contact me via Craigslist only i will get back to you asap. ”
This morning we are on the road to Phoenix. Here’s our planned route. We’ll be visiting my kids in SLC, then heading south from there.
Some photos from Eric’s Go Pro show him moving some snow in Dannemora, New York. I didn’t think that much snow had fallen this year in the New York area.
Quite the build. It’s street legal.
“The body is a 1947 Willys CJ2A, stretched 21 1/2” and channeled over the frame. The Frame (and title) started off as a 1934 Ford roadster, witch has been “Z’d” with 2×6. Adjustable coil over rear suspension, 4 link. 8.8 mustang rear end with open 2.72:1 diff, new axles and total new brakes. Front end is Super Bell drop I-Beam w/disk brakes & Vega box steering. Motor is new 383 stroker SBC, big cam, flat tops 10:1, 2 bolt, aluminum heads, high rise, 4bbl, HEI. Trans is TH400 stock stall, stock shift. New gauges including spedo/odo, nice stereo.
Nice looking build.
“We are selling our beloved Willys bad ass toy.
Power train, 327 stroker motor, 350 turbo transmission w/shift kit, Rock Crusher transfer case high/low, 9in rear end, air lockers on all 4 corners w/on board air compressor, New 33×12.5 15in. plus 2 rear paddle tires, Body stretched for tons of leg room, 17 gal custom fuel cell w/custom half doors, Diamond plate, Rhino lined interior, costume bumpers, aluminum tilt column, Corbeau 3 point harness bucket seats, Collector plates, locking center console, FM/CD Stereo chrome high end weather proof duel speakers.”
Has a variety of updates.
“V-8 SM 420 tranny,4X4, overdrive, nice hunting vehicle”
Looks like a good price.
“1946 Willys (Jeep) CJ2A. Good runner, 4WD works as it should. Needs a few things including muffler and rear brakes. Reason for selling, I bought a RZR. Will consider trades – 2A, RZR Rangerware cab.”
Runs and drives.
“Runs and drives rebuilt carb and all new brakes. still needs work before it is road worthy.
#s matching body and motor all original. the pto is all there but needs work.
the title is clean and on non op.”
Mark posted this nice looking Gladiator.
“I have one of the cleanest, most loaded original Gladiators left. This is a 1966 2 owner from California. Rebuilt original Vigilante 327 w receipt. Factory Air conditioning (complete but not charged as I would never use it). Factory Chrome PTO winch and bumper (works). Factory 4wd indicator lights under dash. Absurdly clean original bed floor as it had a camper in it. Fully blasted and painted w no body work bed. Runs and drives well. Bad Dana 53 rear professionally replcaed w correct geared Dana 60 by original owner. Original interior in far better than expected condition. Original owners manual included. More photos on Rudy’s CJs website.”
Craig spotted this one.
“1967 M151 A1 Army jeep
Low miles runs great.
M 60 is a display gun and can not shoot.
This is a Vietnam era jeep
I was told the radio works but have not tried it.”
“1947 jeep Willy’s overland. Original engine and also extra engine. New tires and wheels, but also have original wheels. Has P.T.O in back and winch in front. Excellent condition, fully restored. Would be an awesome vehicle to advertise for a business. Or just to enjoy and take to antique car shows.”
UPDATE: **Status Unknown** Was $33,000.
Lots of good work here.
“You are looking just completed, brand new professionally built custom1959 WILLYS FC170 JEEP. This truck has a custom one off steel and aluminum flatbed. The WILLYS is built on a super strong late model shortened suburban chassis. Below is a list and description of all the options, accessories and custom fabrication done.
Special note: Many labor hours and expense went into the building of this vehicle. Nothing was spared. This is NOT a fixer upper or a rust bucket. Over 45K in parts and supplies alone not even counting labor went into the building of this truck. IF INTERESTED THE BEST WAY TO CONTACT ME IS BY TEXT MESSAGE AND THEN I CAN CALL YOU WHEN AVAILABLE OR ANSWER YOUR TEXT QUESTIONS.