Rollcage Research Archives

To Top

1953 CJ-3B East Liverpool, Oh eBay


UPDATE:  This is back on eBay.

(06/20/2010) This jeep has some character.  Note the image that shows ‘the relief hold’, which used to be the gas tank inlet.

“This is a very cool old willys with a neat history. This 53 Willys Jeep Cj3B was restored 15 years ago and used as a pace car and push start vehicle for cloverleaf speedway till it was shut down. It has cool vintage paint with hand drawn pin-striping, with some weather checking for that old school rat rod look. I have tried to keep it as original as possible, and still make a capable 4×4 wheeling vehicle out of it. Here’s a quick break down of it:

Solid frame, no major rust and most of it still has paint on it! Body has no rust showing, but has had bondo and fiberglass repair in the past. It is solid, but not a show truck! Front and rear tow points already attached …”

View all the pics on eBay

Continue reading

To Top

1963 CJ-5 Hartville, Oh $800


I *think* this runs, too.

“1963 CJ5 JEEP WILLIES, SOLID, 4WD, MUST SELL. JOE 330-309-3766, 330-877-3295.”

To Top

1950s CJ-3A Buena Park, CA **SOLD**


1950s_cj3a_knottsberryfarmUPDATE: **SOLD** Was $3500.

(10/26/09) I’m guessing it’s a CJ-3A, however the body appears to have a solid back, so it might be a DJ-3A body?  The seller has included a long description.

“This is a 1940 or early 50’s Jeep Willys. I’m not sure because this jeep is registered as a 1967 due to the year of the motor. The motor is a Chevy 283 V8 from a 67’ Chevelle. This Jeep is full of goodies and will always be smog exempt ”


To Top

1952 M-38 Granite Falls, Wa $3000


UPDATE:  Price dropped to $3000

(05/04/2010) I think I’d swap on a different windshield, otherwise, this looks like a build ready for some trails. The tires and rims have to be worth a good chunk of money.

“1952 Willys M38A1, Ford 2.0 motor swap, full roll cage, brand new 32×9.0 Super Swampers Tsl, Hardtop with doors, comes with spare axles, drivelines and tranny, transfercase. be willing to trade 67 or earlier vw bus.  Call Ryan

To Top

Roll Cage Wilsonville, Or $500 or Make Offer


That’s a large diameter tube.

“I have a full cage from a sand jeep I built years ago. Cage is 3 1/4″ tubing. No loger have frame conecting supports but can easily be made for specific application. Could use fresh paint but in great condition. NEVER ROLLED. Call if interested and for specific measurements. Make me an offer. Item is located at my shop in salem but can bring it north for an interested party. Ray 503-545-8609”

To Top

Various Parts, including nice cage — Eatonville, Wa

• CATEGORIES: Body Parts, Parts • TAGS: , .

No price listed on the two tires. The cage and front shell seem like a good price.

“Willy’s steel shell nose and cage.$100.00 Dana 44″s 70″s Wagoneer 3.54 ratio jeep,chevy drop on frontend.$250.00 Gm 10 bolt front and 12 bolt rear stock gears.$150.00call after 4:00pm 253-228-7052”

To Top

1962 CJ-3B Santa Rosa, CA **SOLD**


UPDATE: **SOLD** Was $4000

“1962 Willys Flatfender High Hood, Navy Jeep has a Navy Plack on the dash, 3B, stock 4 cylinder engine, spring over, 35″ BF Goodrich mud terrains, Runs Good. $4000,”


To Top

1948 CJ-2A Selah, WA **SOLD**


UPDATE: **SOLD** Was $2800.

(08/24/09) This looks like it might be a good price on an updated ’48.

“I have a 1948 willys jeep that I want to sell. I havent went jeeping for over a year. I would rather someone thats going to use it have it. It has a 327ci motor, with a 4speed trans. Spring over lift, and has 35″ tires. Starts and runs good. Mechanicly sound, needs a paint work. I have a 8000lb warn winch that i never mounted that can go with it. I also have two sets of tires, four 35-12.50r15, and five 34-9.50-15 swampers, both are mounted on wheels. ”


To Top

1948 CJ-2A Baytown, Tx **SOLD**


1948_cj2a_baytownUPDATE: **SOLD** Was $995.

Yeah, it’s a bit rough.  But, how can you not love the top?

“This is a 1948 Willys Jeep, ran until parked after last winter hunting season. Have a spare motor that goes with it for parts. The WINCH is not INCLUDED :o) The towing bar is included.
e-mail with any questions. $995.00 OBO”

To Top

1946 CJ-2A Woodland, Ca **Sold**


UPDATE:  A reader reports this has been sold.

This appears to be a very nice rig and I think it’s a very good value given it’s got a stainless steel chrome windshield. I’m pretty sure the seller means sm420 tranny.  Interestingly, the very top pic on the bulletin board shows an external fan attached to the outside of the grille.   I don’t know if that’s a new feature or an old one, but it would suggest there might be cooling problems.

“Thinking about selling the wifes rig. She never drives it and Im tired of seeing it sit. $4000 obo.  200 miles on new chevy 350, hyper pistons, small cam, 1.6:1 roller rockers, 4bb quadrajet carb. 31″ tires, 95% tread. GM power steering. best top high back seats. Fishmouth fab 6 point cage. soft top. sm240 4 speed. d18 transfercase with 200 miles on it since rebuild. on board air.  5.38 gears. dana 44 rear. dana 25 front. fenderwell headers with 2 chamber flowmasters. griffen aluminum radiator …”


You can view a variety of pics at this bulletin board (some pics at the top and some you have to scroll down about midway)


To Top

1942 MB Woodlake, CA **SOLD**


1942_mb_woodlakeUPDATE: **SOLD** Was $1200.

“Low hood flatfender willys,with mid 80’s chevy Iron Horse 4 cylinder engine and 3-speed manual transmission. Engine runs and is installed but is not hooked up. New radiator core, 2-1/2″ lift springs, body is pretty strait .Good tires and wheels,Has steering column but not installed.I have original transfer case (doesn’t fit new trans) but nothing installed.4 point cage, no windshield frame or top.”

To Top

Flat fender roll cage Snohomish, WA **SOLD**

• CATEGORIES: Roll Cage • TAGS: .

UPDATE: **SOLD** Was $100

This looks like a very nice roll cage.  You’d be hard pressed to make this cage for 3 times that price.

“6 point roll cage from willys flat fender jeep $100”