This appears to have been a CJ-2A that’s been heavily modified. Possible CJ-2L?
View all the information on AuctionZip
“Willys Jeep With Equipment Attachment Willys Jeep Truck with front end loader or snow plow”
This appears to have been a CJ-2A that’s been heavily modified. Possible CJ-2L?
View all the information on AuctionZip
“Willys Jeep With Equipment Attachment Willys Jeep Truck with front end loader or snow plow”
The VIN plate suggests this is a CJ-5 that’s been stretched and put on a Chev chassis. The grille sure is unusual.
https://flagstaff.craigslist.org/cto/d/stretched-1958-jeep-willys-cj/6603086090.html
“958 Jeep Willys
VIN: Seepicsofvinplate
condition: fair
cylinders: 8 cylinders
drive: 4wd
fuel: gas
odometer: 6000
paint color: white
title status: clean
transmission: automatic
I’m selling my awesome project because we’re selling our house and I ran out of money. Will trade for truck of equal value. Send me offers.
Continue reading
UPDATE: still Available.
(06/01/2017) Seth thought someone might enjoy this one. It’s a dual cowl, wooden bench Jeepster.
“1949 Dual Cowl Phaeton, 4 cyl, tuned exhaust, hi-rise intake, 3 sp, bench seats. NEW motor, brakes, susp, steering.”
https://chicago.craigslist.org/sox/cto/d/willys-jeep-jeepster-rat-rod/6608840403.html
UPDATE **SOLD** Was $3500.
(03/20/2018) Lots of mods here. It includes a WARN OD.
“Offered for sale is this 1948 Willys Jeep CJ2A. The Willys has a Buick V6 conversion that runs and drives great. The vehicle also has a GM SM420 transmission conversion that works excellent. It is equipped with a granny low gear and a Dana 18 transfer case w/ Warn Overdrive. 4-Wheel High and Low both function properly as well. The axle’s are Dana 44 front and rear. The suspension, axles, and part of donor frame have been welded to the original/existing frame. As one can see from the photos the body is a little rough but as stated above the vehicle runs and drives. This vehicle could crawl off road trails right now or could be a great blank canvas for someone to build on. The vehicle has a clean CA title. Off road use only. No plates or reg. Asking only $3,500!”
I can’t remember where I found this, but I thing it was part fo the Denver, Colorado, St. Patrick’s parade. Anyone know anything about this jeep?
UPDATE: **SOLD** Was $15,000.
Lots of updates. Appears in good shape.
“Stretched 22 inches 102 inch wheel base 1998 5.7 suburban motor 700 R4 transmission 37 inch tires Detroit lockers front and rear. $15,000”
UPDATE: Price dropped to $8500.
(02/07/2017) Lots of custom work here. Body stretched and beaten (tortured?).
“1953 Willys CJ 3B
Stretched body, custom frame, Dana 60 rear posi disc brake, 44 front open, vortec small block, sm465 , np205
Is a running driving project needs finishing needs paint gauges installed wiring cleaned up new tires new shocks maybe some kind of a top
I’m interested in cash or trade let me know what you have”
https://sacramento.craigslist.org/cto/d/1953-cj-3b/6430159393.html
UPDATE: Still Available.
(09/29/2015) Stretched with other mods, it appears to have the original engine.
“This is a heavily modified 1952 Willy’s Jeep. It has a Rusty’s based 3 bar suspension front and rear. The body has stretched 10″ and custom 18″ wheels and off road tires bolted up to the Dana axles. It is also equipped with a 6 point roll cage and a PSC hydraulic steering unit. It has the original flathead four cylinder and Solex carb. Only 320 miles since restoration.”
https://denver.craigslist.org/cto/d/1952-jeep-willys/6382067713.html
There could be value here for the right person.
“CJ5 frame, New body cut and stretched-added 4″ to match frame-turned out nice. Front axle Dana 27, rear axle Dana 44 – 3.73 ratio on both. Factory Saginaw Steering. New springs and brakes. 1 new in box Novak Kit for SM465 to a T18 kit and 1 Chevy motor mount kit new in box. 2-SM465 transmissions w/ bellhousings plus a whole lot more new and used components.
NOTE: this is a complete new body w/fenders, hood, grille and windshield frame. Includes a CJ5 title w/ID tag.”
https://centralmich.craigslist.org/cto/d/willys-jeep-cj3b/6268310744.html
Looks like the body has been stretched. Has lots of mods. May be a good price.
“I have a Willys CJ2a with a SBC V8 Engine, Dana 44 Front and Rear Axles with lockers, Four Speed with Granny Low and Model 18 with Overdrive. Financial Hardship forces sale. Too Much To List $5,900.00 obo.”
https://sacramento.craigslist.org/cto/d/1946-jeep-cj2a/6247108403.html
Seller dropped this ’48 body onto a Suzuki Samurai. The battery must be in the box behind the front bumper.
“I have a 1948 willys body stretched to fit on a 88 Suzuki samurai. 4 cyl 5 speed 4×4 with 143,000 miles. Was lifted about 5 inches. Brand new wheels and tires and paint, it is a rough texture bed liner paint. It needs some work here and there to be finished right but can drive. I put over 4K miles on it last year”
UPDATE: **SOLD** Was $2000.
Stretched and modified CJ-5.
“Modified willy’s Mud Truck new rear tires front tires have great tread has 3/4 ton chevy running gears 4.56 318 automatic runs and drives don’t need it anymore would like to trade for a decent zj jeep grand cherokee 93 to 98 with title”
UPDATE: **SOLD** Was $15,900.
“1941 Jeep Willy stretched about 3 feet longer. Toyota Landcruiser frame, 350 chevy high performance roller motor. 3/4 cam. 202 heads gear driven, Double cover valve covers polished aluminum, chrome 650 double plumper carp. Engine professionally build brand new by Charles Hoverton out of Phoenix via Pro Stock Eng Builders…etc etc too much to list,,over $8,000 in parts in the motor. Borg and Warner 4 speed manuel, new heavy duty clutch assembly 12 inch, 2 Ford 9 inch front and rear ends, shorty headers. This jeep is appox 0 miles on the new crate motor. Additionally, old school Chevy parts, engine hoist and 1963 327 motor also available if wanted. Plus, extra chevy parts available, alternator, brand new 6 blade fan, starter, headers, thrush pipes with headers, 3 stage flow masters, etc etc. Will sale parts separately …. Must Sale! Best offer $15,900, willing to negotiate. Engine is $12,000 alone. Make an offer, possible trade plus cash. 1941 Jeep Willy title.”
UPDATE: Still Available.
(12/02/2016) A one-of-a-kind for sure.
“This Willys has been completely customized! Extended frame and tub. Chevy 350 engine, with Chevy 4spd transmission with granny gear, dana 60 rear axle, dana 44 front. All new wiring. 36″ tires. Great off road vehicle, or could be used on the road. Has a 1968 title.”
Lots of modifications on this unusually stretched CJ-3B.
“This machine is 100% Solid Steel. No bondo, no fiberglass. Built in Colorado by professional machine shop at a cost of $14k. Receipts can be provided. V8 350 Good Wrench motor with less than 1000 miles on it. 4wd, 2 seater and Dual exhaust. This thing can rumble. Brand new tires, transmission, power breaks, and headers. This ride is great but I need the money for the holidays. Received offers to sell locally. There is no reserve on this listing so it will sell. I was burned the last time I listed this so No paypal.”
Has all kinds of mods.
“Santa Claus is coming to town and needs a new sled!!!!!!
1958 Jeep Willys
Automatic V8 350 with less than 1000 miles
Headers with dual exhaust that have a mean rumble
Electric fuel pump
Power stearing/ power brakes
Brand new 35 x 12x 50 tires
New interior
Drive anywhere. Just completed 400 miles with no issues
$14,000 spent building this in Colorado…I have all receipts+
Call and leave message or email.”
UPDATE: **SOLD** Was $1000
The body has been lengthened. I’m wondering if this is on a later model CJ-5 chassis? Either that or the frame has been lenghtened.
“Has sat for a long time. Is a good restoration project. $1,000 or best offer. All reasonable offers considered.”
UPDATE: **Status Unknown** Was $7500.
(02/08/2016) This was built as a dunes jeep.
“1954 willys cj3b. has been stretched to 92 inches. primarily built to be used in the sand. but has been licensed and insured for the last 15 years that i have had it. engine started as a mid 60’s ford 428 cu in……..as found in the kr500 shelbly mustangs. i took it down to bare block and built it to 435 inches with, 10.5 comp, aluminum edebrock heads, gear drive, comp solid cam, aluminum roller rockers, edel..broc performer intake etc. ended up with 500 hp. the trans is a built to the hilt c6 auto with b and m holeshot 2400 stall converter. has 5.38 rears front and rear. i originally built this motor for a shelbly close mustang or late 60’s fairlane to run brackets…..but work got in the way and never happened. needless to say this jeep runs on the street and in the sand very well. has msd billet distributor and msd7ml-2 ignition. which you can change rev limiter in seconds by chip change. will twist 7000 rpms…..but i run 6400 chip, car has gobs of torque.
Continue reading
UPDATE: **SOLD** Was $9500.
The body was stretched from it’s CJ-6 size, making it not so much rare as it is custom. A neat jeep though. It’s not clear to me, but I think this was a CJ-6 stretched onto a Scrambler chassis?
“One of a kind very rare. Use it like a truck or a Jeep. No smog required. Clean title, pink in hand. Professional Custom stretch CJ8 Scrambler. Factory 304 v8, t18 4 speed stick shift, model 20 t case twin stick, 4.0 low range. Dana44 rear, Detroit locker, 33 spline shafts, rear warn hubs, front Dana 30, ARB air locker, both with 4.88 gears. On board air engine driven compressor. 4″ lift kit, 33” BFG mud tires. Runs and drives excellent. Lots of power. I have full soft top and full soft doors plus half soft top and half doors. It comes with a very nice tow bar and lift jack. Lots of money invested in this jeep. Very easy to tow because all wheels unlock.
This is great jeep to own for jeep enthusiasts. My price is firm. “
It’s a project.
“non running project, but won’t take much to get it going. has a newer 5.7 sbc with a four speed manual transmission. body has been stretched and put on a scout chassis. it’s going to be pretty cool when it’s done. clean title.”
You don’t see this everyday.
“1950 Jeepster with 7.3 turbo diesel, 6 speed manual, 4 wheel drive. Clean title. Stretched and lifted with procomp springs on 37 in tires. New interior. Just built from the ground up. Have pics and documents of build. Dont need to sell but am ready for the next project. Would trade for nice lifted Cherokee or old mussel car that needed a little work. I think trade value is around 8k. Text for more info and pics”
UPDATE: **Status Unknown** Was on eBay
Need a jeep with a little extra room?
“1 OF A KIND CUSTOM JEEP CJ-8–SCRAMBLER- IT HAS A 40″ STRETCH—5 1/2 ” LIFT–3″ WIDER STANCE–19 1/2 IN LEGNTH AND 6 1/2″ WIDE AND HIGH. IT FITS ON 18′ CAR HAULER EASY- DESCRIBED AS A 4 DOOR CONVERTIBLE TRUCK WITH A REMOVABLE TROOP HAULER IN THE BED- EVERYTHING IS JEEP EXCEPT THE CHEVY REMANUFACTURED 350 ENGINE. IT HAS 4 SPEED -4X4-PS- PDB WITH DUAL DIAPHRAGM BOOSTER-1 WIRE ALTERNATOR-ALL NEW BESTOP INTERIOR—37″ T REXUS TIRES-BALLENCED AND ALLIGNED. 4 SHOULDER HARNESSES BUT ALSO HAS SEAT BELTS IN FRONT FOR ON ROAD DRIVING. (2) SPEED ELECTRIC WIPERS. LOCKING HUBS.
IT HAS A FULLY EQUIPTED CROSS BED TOOL BOX AND BENCHES IN REAR PLUS SWING AWAY TIRE HOLDER AND TAILGATE. THE FRONT WINDOWS ARE REMOVABLE AND CAN BE STORED BEHIND THE REAR SEATS. THERE ARE FRONT AND REAR LOCKING ARM REST STORAGE BOXES BETWEEN THE SEATS . IT IS EQUIPTED TO TOW OR PULL OUT WITH THE RINGS ITS ALL IN BEAUTIFUL SHAPE AND IT WILL –HAUL IT ALL–USE ON RANCH-ADVERTISE WITH IT OR GO STEAL THE DAY AT THE CAR SHOWS. STARTS . STOPS . RUNS..AND DRIVES EASY- SMOOTH DRIVE TRAIN-GREAT BRAKES AND E BRAKE- STARS FIRST TIME YOU HIT THE KEY ALWAYS —NOBODY WILL HAVE ANYTHING LIKE IT GAURENTEED . I HAVE A LOT OF RECEIPTS THAT GO WITH IT.—-I WILL CONSIDER A BUY IT NOW . –P.S. MAY TAKE A 55 OR 57 CHEVY–OR A 70-74 CHALLENGER OR CUDA- TRADE ?? UP OR DOWN —DON”T BID UNLESS YOU ARE BUYING IT – -PREVIOUS BUYER WAS OUTSIDE U.S.A. AND UNABLE TO FOLLOW THRU —————— NO RESERVE !!!! I HAVE OVER $23K IN RECEIPTS THAT ALL GO WITH IT. —MY LABOR WAS ALREADY FREE—SUPER DEAL !!!!!!!! “
Looks trail ready. I wonder if they stretched the frame also, or just used a CJ-6.
“Up for sale is my fully restored Jeep CJ. It started life as a CJ5 but has been stretched 20 inches to a CJ6 (101 inch wheel base). Jeep has 5k miles on it since frame off restoration. Over $20k invested in upgrades. Some upgrades include; custom dash with Autometer gauges, Suspension Seats, tilt steering, power steering with AGR super pump and box, Dana 30 front end, 4 inch lift, Rebuilt 225 V6, Rebuilt T86, Rebuilt Spicer 18 T-Case, Brand new Swampers mounted on 15X10 A/R rims and more! This is NOT a crawler but I’ve had it in some hairy spots and never been stuck. Great trail jeep, hunting vehicle or daily driver. Jeep needs absolutely nothing and is ready to go! ”
UPDATE: **SOLD** Was $5000
(07/10/2015) Because this sits on a post ’71 CJ-5 chassis, the front clip has been lengthened.
“1951 Willy’s M38 Jeep. Runs and drives well. Set up on a 1973 cj 5 chassis and drive line. 258 straight 6 ,3speed manual transmission . Needs minor things to totally finish out . Front axle joints , front spring bushings, better front seats. wipers need finished wiring. Just small stuff. Assembled vehicle title already done in Ohio. decent paint job . turns heads at the car cruises.”
UPDATE: **SOLD** Was $3500. This is back up for sale after being listed in 2009. Could be a CJ-2L.
“1945 Willy jeep roll cage winch to much to list.”