VEC Research Archives

To Top

1948? CJ-2A Winstead, Mn $2,995

• CATEGORIES: CJ-2A • TAGS: , .

1948_cj2a_winsteadA reader named Jim forwarded this interesting CJ-2A.  The body appears in very good shape.  It sports a column shift and a PTO.  It appears to have a CJ-3B windshield. With the 3 dash panels and the column shifting, I’d guess this (or part of it) is actually a mid 1946 rather than a 1948.

“GREAT WILLYS RUNS AND DRIVES GREAT 3SPD PTO WINCH TOW BAR 2 EXTRA SPARES NICE SHAPE TURNS ON A DIME WILL GO JUST ABOUT ANYWHERE TRADES WELCOME BRYAN”

 
To Top

1945 CJ-2A Huntington Beach, Ca **Sold**

• CATEGORIES: CJ-2A • TAGS: , .

UPDATE:  Lee just bought this Jeep. Congrats!

This restoration looks beautiful, though if this is really a ’45, then I think it should have the column shifter.  It’s beautiful and I rather like the burnt (?) orange.  The one element I don’t like is the ‘all wheel drive’ plaque on both sides of the hood.  It’s also missing the rear soft-top bars holder on the driver side.

“The vehicle IS titled as a 1943 though the serial number on the vehicle matches the code for a 1945. The transmission is a 4 speed.”

1946_cj23

 
To Top

1946 CJ-2A Fort Collins, CO **SOLD**

• CATEGORIES: CJ-2A • TAGS: .

1946_cj2a_fortcollins1UPDATE: **SOLD** Was $2400

“column shift, has new tires, fuel tank and carb”


 
To Top

1946 CJ-2A Hood River, Or $5000

• CATEGORIES: CJ-2A • TAGS: .

Note the driver’s side cutouts.  This is likely an early ’46.

“46 Willys Jeep original drive tran – up grade to motor chev V6 – floor pan repaired during recent rebuild with my Dad in 05 He is no longer able to drive jeep Call 541 490 5784 $5000 obo”

http://portland.craigslist.org/grg/cto/912677984.html

 
To Top

1946 VEC CJ-2A Hudsonville, MI **SOLD**

• CATEGORIES: CJ-2A • TAGS: , .

UPDATE: **SOLD** Was $850.

I’m guessing the pictures don’t do this jeep justice?  Only $850?  I don’t see any duct tape or baling wire, so it must be worth at least a $1000?  Definitely worth a look.

“This is a 1946 cj2a willys jeep. it runs, drives, and the brakes work. the body is in pretty rough shape. I would say that from the windshield back it is shot, but im also not a body guy. the motor runs good, smokes alot. the drivetrain is in great shape 4×4 high and low works. the frame looks very solid, i didnt notice any rusty sections. i dont want to try to fool anyone, this jeep needs some work. it is drivable as is but needs some tlc. i have too many projects and need to sell this one unfortunately. im asking 850 obo. “

 
To Top

1946 VEC CJ-2A Springfield, MO **SOLD**

• CATEGORIES: CJ-2A • TAGS: .

UPDATE: Was on eBay. **SOLD**

“This Jeep is being relisted from about 3 weeks ago. Up for sale is a 1946 Willys Jeep that I bought from an an elderly gentleman’s estate sale in February. This is a very early CJ2a that originally came with a column shift. I have not had the time to devote to rebuilding it and now I must sell it to make room for other vehicles. I got this jeep running with a basic tune up. It has a Buick 231 V6, power steering conversion and add on turn signals. This jeep does need work. The front left frame horn appears to have a slight tweak downward on the left side.”

 
To Top

1946 VEC CJ-2A Kansas City, Mo eBay

• CATEGORIES: CJ-2A • TAGS: , .

If you are looking for an early CJ-2A, this has got some good elements, including the driver’s side cutouts, the column shifter, and a heater.  The passenger side fuel hole is interesting; I don’t believe that was stock?

“This early CJ-2A has an ID number of 16741.  It is a 3 speed on the tree.  It has a clear MO title. Below is the description: Motor – Org. 4 cylinder.  Just got back from machine shop.  All four cylinders were re-sleeved.  Crank was polished.  New pistons, valves, springs, etc  Everything still in boxes as you can see by the pictures. Interior – I have no seats. Does have a roll bar.  Floor is solid, except for the “bed”. It should be cut out and fitted with new metal.   Exterior – The only rust I can see is the passage side step. Some of the Hat Channel underneath will need to be cut (maybe 3 feet)  Tailgate is orginal, but is pretty rough.  I have no windshield and I don’t believe the hood is org. because there is no Willys stamped on it.”