Windshield Research Archives

To Top

1948 CJ-2A (fiberglass) Kooskia, Idaho **SOLD**

• CATEGORIES: CJ-2A • TAGS: , .

UPDATE:  **SOLD** Was $2000

(08/26/09) This package would be interesting to examine.  It includes an overdrive.

“Project, I started a frame of restoration/build up, over $7,000 invested. Just a few mods like munci 4 sps. trans with warn overdrive, 11″ new brakes, new Rancho 2″ springs and custom shackles, new fiberglass body ( minus hood ).. and many more ”

1948_cj2a_kooskia3

 
To Top

1947 CJ-2A Fresno, CA **SOLD**

• CATEGORIES: CJ-2A, DJ-3A • TAGS: , .

UPDATE: **SOLD** Was $1500

This doesn’t have a motor.  It has a Muller Top.

antique yes custom yes running not yt but ready for a 350 chevy to drop in.”

1947_cj2a_dj3_fresno

 
To Top

1947 CJ-2A Grand Coulee, Wa $1000

• CATEGORIES: CJ-2A • TAGS: , , , .

1947_cj2a_grandcouleeUPDATE:  Price dropped to $850.  I assume the unusual windshield is due to the hard top.

Here’s a jeep with an unusual top. and it appears to be a lefty, though the tire is mounted pretty high.

“Project i never had time for, nearly complete except for a few parts that were taken by midnight shoppers. starter air cleaner,carb missing.”

 
To Top

Very unusual Flat Fender Ottawa, Ontario, Canada **Status Unknown**

• CATEGORIES: CJ-2A, Features, Racing, Unusual • TAGS: , .

UPDATE:  The status of this is unknown.

This is an extremely unusual flattie. The seller provides a great deal of info about it. It’s been featured in various magazines.

“1946 “Willys” Jeep CJ-2. The “Jeepilac” as it is known (Jeep with a Cadillac engine) was professionally built by Johnson Welding Works. They are a local shop and are very well known in the area for building high quality street rods using top quality parts with attention to detail and safety. It has 2,700 miles since the build …. ”

This vehicle was also featured in the movie “Smash Cut“.

modified_flatfender_ottawa-canada

 
To Top

1947 CJ-2A Windgap, PA **SOLD**

• CATEGORIES: CJ-2A • TAGS: .

1947_cj2a_windgapUPDATE: **SOLD** Was $1400.

This is a great price.  I assume the windshield is from a hard top.

“1947 WILLYS JEEP CONVERTED FROM 6 VOLT TO 12 NEW TIRES BATTERY ALTERNATOR STARTER COIL FUEL TANK ELECTRIC FUEL PUMP AND 12 VOLT GUAGE CLUSTER, 6FT PLOW WORKS GREAT VERY MINIMAL RUST. TANSFER CASE AND TRANS. REBEARINGED AND RESEALED 3 YEARS AGO 1400 OBO RUNS AND DRIVES GREAT”

 
To Top

1947 CJ-2A Detroit, Mi $3500

• CATEGORIES: CJ-2A • TAGS: , , .

1947_cj2a_detroitUPDATE: The price has dropped to $3500

The paint job on this is interesting.  The bumper is pretty wild; I guess the jeep was used for pushing?

“The body is in good shape it runs and drives tires are good dont leak has a toe bar on the front with a custom front bumper.”

 
To Top

1948 CJ-2A Temecula, OR **SOLD**

• CATEGORIES: CJ-2A, Racing • TAGS: , .

1948_cj2a_temeculaUPDATE: **SOLD** Was $6000

“350 Hipo small block with corvettte manifolds,Holley 600 cfm carb , electronic dist, 350 turbo hydro transmission with shift kit hurst comp shifter , Hooker super comp headers, Ford 9″ loncoln housing currie axles 457 gears disk breeks, all new paint , guages, interior carpet seat street legal runs FAST and turns Heads”

 
To Top

1948 CJ-2A Sanger, CA **SOLD**

• CATEGORIES: CJ-2A • TAGS: .

UPDATE: **SOLD** Was $1600

For $1600, this looks like it might be a pretty good deal.

“1948 Willys Jeep – 327 eng., new tires, new top. Registered as 1976, won’t smog (Off Road).”

 

 
To Top

1946 CJ-2A Medford, OR **SOLD**

• CATEGORIES: CJ-2A • TAGS: , .

UPDATE:   **SOLD** Was No Price

“1946 Willys CJ2A, Built, Chevy 350 small block, Only 16,000 miles on the engine, Electronic Ignition, Headers, Flowmasters, Tilt front-end, Roll-Cage, Soft-Top (removable), VDO dash gauges, Custom Fabricated, Traction/Stabilizer bars”

 
To Top

1947 CJ-2A Nashville, TN **SOLD**

• CATEGORIES: CJ-2A • TAGS: .

UPDATE: **SOLD** Was $4000.

“jeep has a newly rebuilt motor and i have hardly driven it. it has a spare gas can and a tow bar on the front. the body is in fair shape. this would be a great project jeep. cashiers check or cash only please.”

 
To Top

1948 CJ-3A Randy Lawson’s Build

• CATEGORIES: Builds • TAGS: , , .

This article about Randy Lawson’s build appeared in the 1994 Off-Road Magazine.  It took Randy 15 years to redo his CJ-3A.  Unfortunately, I don’t have a before picture.  Some of the details not mentioned in the short article on this page include the following:

  • Randy has added a second little window below the wipers on the windshield.  I assume this is custom as I’ve never seen it before.
  • Randy changed the look of the cowl on the engine side by placing a chromed or polished plate across it.  It makes it look very clean.
  • It appears Randy padded the dash (you can see this here and here ).
  • The Jeep may be registered as a CJ-3A, but the cutouts on the passenger side suggest an M38.

Continue reading

 
To Top

1964 CJ-3B Indio, Ca

• CATEGORIES: CJ-3B • TAGS: , , .

Was listed at $10,000

I like the day-glo color and the safari window.  Though slightly impractical, the dash is installed nicely.  Plenty of details to like about this jeep.  This may be a bit much to pay for a drive train without much updated (perhaps it’s rebuilt?).

“This 1964 Kaiser 3B is a “High Hood” with a very clean Chevy 350. We have updated the dash with new gauges and wire. It is still four wheel drive with little mods to gearing. This jeep has always been garaged and well maintained. The windshield it very rare due the the “Safari” style windows. We have a set of rear paddle tires (Sand Tires Unlimited) with rims. Still have the original soft top and soft doors.”

 

 
To Top

1948 CJ-2A San Diego, Ca $4500 obo

• CATEGORIES: CJ-2A • TAGS: , .

I find this jeep slightly puzzling. I love the nice detail and old school upgrades — the full roll cage, the extra large windshield, a good front bumper mod, the nice paint job, updated seats — yet it still sports an F-head?  This jeep looks like it should go fast, but can’t.

“Fresh F-Head 4 Cyl., new exaust, 3 speed w/overdrive, 8000# Winch, full roll cage, front disc brakes, custom tall windshield, custom seats, rock bars, custom bumpers — $4,500 o.b.o.,”