To Top

1972-1975 Jeep CJ-5 4WD Hardware Body $1,200 South Glastonbury, CT

October 26, 2025 • CATEGORIES: CJ5, Parts This site contains affiliate links for which I may be compensated.
0

1972-1975 Jeep CJ-5 4WD Hardware Body $1,200 South Glastonbury, CT

Little newer for our crowd, but not a bad price point. Not sure how much crosses over to the Kaiser Jeeps to be honest. Kaiser sold to AMC in 1970. Stuff like the additional parking lights on the fenders and the sorts are not going to fly for an older rig, there are some things I notice for sure like that.

Information from seller:

No paperwork! For parts or trail rig Four wheel drive hardware fiberglass body. Clean rolling chassis. No rot on the chassis except for the rear cross member bumper. Asking $1200 obo

https://www.facebook.com/share/17B9Vv6oRc/

[fb_button]
 
To Top

1965 Jeep CJ-5 Parts $1,400 Atco, NJ

October 26, 2025 • CATEGORIES: CJ5, Parts This site contains affiliate links for which I may be compensated.
0

1965 Jeep CJ-5 Parts $1,400 Atco, NJ

If you don’t have a disassembled stalled project in your inventory are you a real Jeep person! Mines been apart for almost 29 years, it happens. I would pick this one up for the building as a display frame and driveline. I’m just super booked to be able to head down there not going to happen. But this looks like once you get the engine sorted you could be yard driving this one in a few weeks of clean up.

Information from seller:

65 Keiser Jeep solid frame, drivetrain, cracked block, but head might be fine. Rears, transmission, transfer case were all rebuilt 20 years ago. Some engine parts and original owners manual. Asking $1400 or best reasonable offer. Also have title and tag.

https://www.facebook.com/share/1aSMrvF4wt/

[fb_button]
 
To Top

1960 Hotchkiss M-201 Jeep

October 25, 2025 • CATEGORIES: Uncategorized This site contains affiliate links for which I may be compensated.
0

Update on the Hotchkiss M-201, I pulled this one down. I found the same rig and all the pictures on a UK FB post.

I was just talking to someone over email about the importance of the Photos and how they are invaluable to use for search to do basic cross references.

The story about the BAT rig that was posted as an MB, and it being an 1960 Hotchkiss, then this being a 1960 Hotchkiss, it was all too fishy for me at this time.

So doing some more digging I found the same email tied to a similar approach where the user grabbed a BAT photo of a high end Chevy 427 that sold in March, then reposted it on a site racetrade in Aug for like half, it sold on BAT for $50k reposted for $22k.

So this was almost the same exact approach on this ad.

I do try to vet the emails and users as best possible prior to posting, but this one got through and that sucks, but as soon as I figured it out it came down.

I have notified the other site of the suspected scam for the other race engine as well.

Thanks, Tim

[fb_button]
 
To Top

1968 Jeep Kaiser M-725 $8,500 Wilbraham, MA

October 25, 2025 • CATEGORIES: M-715 • TAGS: , , , . This site contains affiliate links for which I may be compensated.
0

1968 Jeep Kaiser M-725 $8,500 Wilbraham, MA

Love the look of the M-715 and M-725, it just has that GI Joe kids toy kind of rough and tough feel. This being a County rig is very cool. Wonder what the history of this one was.

This should have a later 230 Tornado that has a bunch of upgrades to it if it is a ’68, and with low miles might be a good little power plant.

Driveability, these were not designed for highway use, but they are cool rigs. You see most of the time the 230 needs to go away and maybe a 6BT is tossed in its place. Which is a cool engine but the Tornado is a neat just very niche and not for everyone.

If you buy it and swap out the 230, hit me up happy to add the engine to the collection.

Information from seller:

original 12,900 miles jeep 725 super solid sat in garage it’s whole life runs and drives 8500$ brand new michelin tires about 39” tires 12900 original miles.

https://www.facebook.com/share/17ZgcR9kVa/

[fb_button]
 
To Top

Marx Metal Willys Jeep $135 Hagerstown, MD

October 25, 2025 • CATEGORIES: CJ-2A, toys • TAGS: , , . This site contains affiliate links for which I may be compensated.
0

Marx Metal Willys Jeep $135 Hagerstown, MD

Not sure when “listed”, but neat Jeep Toy. I’m not up on the market prices so just sharing more for what it is then what is vs what it is listed for. The paint details look original, but I know nothing about this, just has that legit look to it.

Here is some AI info on these…… (errors and omissions may apply)

This is a vintage Marx Willys Jeep toy, likely from the 1950s.

  • It is made of pressed steel and typically features a folding windshield and an opening hood.
  • The toy is a popular collectible and can be found in various conditions, from well-preserved to those with paint wear and light rust.
  • The toy was made by Louis Marx & Co. and sometimes has “Willys” and “Jeep” marks but no “Marx” markings.
  • The value of the toy varies greatly depending on its condition and any missing parts.

Information from seller:

14 inch long heavy duty metal windshield folds down hood comes up. Battery powered headlights with size D battery’s never checked to see if they worked. Very old toy little dusty from on the shelf price is firm

https://www.facebook.com/share/1ACpcSnTD2/

[fb_button]
 
To Top

1946 Jeep Willys CJ-2A $20,500 Manchester Center, VT

October 25, 2025 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

1946 Jeep Willys CJ-2A $20,500 Manchester Center, VT

Very clean looking restoration. Hop in and enjoy this one, clock is ticking for sure till it probably needs to sleep for the Winter.

Information from seller:

Very good condition 1946 Willys Jeep. Runs and drives great. Soft top is included.

https://www.facebook.com/share/1BKJg7bBGo/

[fb_button]
 
To Top

1948 Tow Mater Willys $11,000 Clinton Corners, NY

October 25, 2025 • CATEGORIES: Willys Trucks • TAGS: . This site contains affiliate links for which I may be compensated.
0

1948 Tow Mater Willys $11,000 Clinton Corners, NY

Rat Rod, a lot of work goes into these, the small details and the sort are really cool. At a show back in 2024 there were a few and my son wanted to sit in one so the owner of one said absolutely get it, he loved it. While we were talking my son grabbed the shifter and pulled it out of gear, no harm, just funny as he was ready to go! I’m in the club of kids and folks can absolutely climb in and if they wanted to go for a ride, jump in. I grew up around the “Keep Hands Off” rods, and rightfully so when you have a $20k paint job, so we don’t do that and have fun but respect the work performed for sure.

Information from seller:

NO TRADES – CASH FIRM ! I built this truck it’s a blast to drive! 1948 Willys” Tow Truck” – TOW MATER- booms are for show. Chopped 5″ Beltec Lowered front and rear, 16 gallon gas tank. Chevrolet S10 Frame Swap. New dot approved windshield, Rebuilt 350, Turbo 400, Gm 10 Bolt, All new Wiring, Tilt gm Chevy Steering Column, Power Disc Brakes, New Rear piston custom taillights. Reliable and Fast. Drive it home – Clear 1948 Willys title-Located Clinton Corners New York 12514.

https://www.facebook.com/share/1CcfhuQz9f/

[fb_button]
 
To Top

Willys CJ Tailgate $225 Haskell, NJ

October 25, 2025 • CATEGORIES: CJ-2A, CJ-3A, CJ-3B, Parts • TAGS: , . This site contains affiliate links for which I may be compensated.
0

Willys CJ Tailgate $225 Haskell, NJ

What is the going rate for these? Not sure what this even fits.

I see them a lot, don’t have a use for one other then a Wall Hanger, I would buy one in the $50 range would be my target for a Wall Hanger is my thinking.

I never post these since there are lots out there it seems. But if you are in the know I’m open to learning more.

Has good patina and colors.

This looks like an older listing by the Photo file names I grabbed, still lost on how to tell when a listing was posted when they no longer have the “listed ### ago” still not even sure how they gets this under “listed”. So just for that reason this is more of a science experiment on my end to learn more about tail gates and WAG on prices if you are game to share.

Information from seller:

Jeep Willie’s tailgate unsure of exact year in good shape 225 cash

https://www.facebook.com/share/1BHSbxLW7A/

[fb_button]
 
To Top

1956 Willys F134 Engine $500 Granby, CT

October 25, 2025 • CATEGORIES: CJ-3B, CJ5, Engine, Parts, Willys Trucks, Willys Wagons • TAGS: , . This site contains affiliate links for which I may be compensated.
0

1956 Willys F134 Engine $500 Granby, CT

Well a few F134 posted up, this looks like a good option as well. You probably can fit 2- F134 in the truck!

Information from seller:

Up for sale: 1956 Willys F134 engine. It will come complete from flywheel to water pump and exhaust manifold to plow pump. It does run off of a remote tank of gas. Still installed in truck. Looking to get $500 for the setup. Located in Granby, CT

https://www.facebook.com/share/1AiMq4jfCM/

[fb_button]
 
To Top

1961 Jeep Willys Truck $8,000 Huntington, MA

October 25, 2025 • CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.
0

1961 Jeep Willys Truck $8,000 Huntington, MA

Might be able to source a bed, they are out there, but also a few repops being made as well, fenders not so much, this has fenders. But for the price might be worth a look here. No interior shots, 226 Engine.

Information from seller:

This Willys truck is all original except for the wood bed. It was frame off restored a long time ago with a full engine and tranny rebuild. It runs great drives well. Recently, had a full undercarriage redo and complete brake replacement. Could use a new paint job. This vehicle is solid. Not a rusty mess. Easy cleanup to a nice show truck

https://www.facebook.com/share/1A6XAXAHXK/

[fb_button]