Need work of some kind.
“Runs & Starts OK, World War II Markings – Ranger 2nd Battalion, New Type Air Filter, Lights Work, Stored Indoors, Need Some TLC.”
https://minneapolis.craigslist.org/ram/cto/d/willys-jeep-ja/6228341998.html
Need work of some kind.
“Runs & Starts OK, World War II Markings – Ranger 2nd Battalion, New Type Air Filter, Lights Work, Stored Indoors, Need Some TLC.”
https://minneapolis.craigslist.org/ram/cto/d/willys-jeep-ja/6228341998.html
UPDATE: **SOLD** Was $3499.
Needs some body work.
“lling a 1946 Jeep Willys. Has been converted to a Ford 302 engine which runs great. Vehicle has clean title, solid original body and drivetrain. This has a 3 speed manual transmission. The top and roll bar are in excellent condition for their age. There is a tow bar in the front for dragging jeep behind a vehicle with a 2″ ball. Licensed as collector. Runs and drives. Bought for restoration project but no longer have the time to work on it.”
UPDATE: **SOLD** Was $5500.
“Runs and drives .
Could use brake master as pedal sticks.
I have too many projects to fully restore this too.
4 cylinder . Manual.
Driver window is cracked.
6 volt.
Starts first try.
Rear PTO
Proce is not negotiable sorry.
Clean Idaho title .”
UPDATE: **SOLD** Was $2400.
One is dissembled.
“Willys Jeep FC150s. One has very good frame. Needs body work. Has been run but needs carburetor repair, and completed coolant system. Drivable with some other work. Currently has a CJ5 rear axle but comes with FC axles. The other has been disassembled and is not completely. Many other parts.”
Not clear how much value is here.
“Willys flat fender CJ2A jeep. Great potential as a rat rod sand car or restore. Even surface rust with slight body damage. Has a Buick 215 cu.in. four Bbl aluminum V8, not running, with cast iron bell housing mated to a jeep three speed transmission and transfer case, steering components, front and rear axles, and straight frame.”
https://denver.craigslist.org/cto/d/willys-cja-jeep/6229489119.html
No pics. It’s part of a garage sale.
“1947 jeep willys army jeep.”
https://rochester.craigslist.org/gms/d/barn-sale/6237556384.html
It is a project. Has updated engine.
“This is not a ridiculous or heavy project otherwise the word “project” is relative.
If I can get what I am in it so far, I’ll let it go. I did not lose interest in it. In my case, the problem is space otherwise I do not have another project needing this space but the wife wants to be able to park inside. We have a 3 door garage and so much STUFF in it. Happy wife/Happy life.
I am cleaning my garage and that’s why I could not approach it to take better pictures but I am just testing the waters right now and that could be good for a potential buyer to be the first to see it LIVE and hopefully ending up buying it because even though these kind of Jeep projects are overall in demand but with the bad pictures I provided, for now, I bet you it wouldn’t be appealing to many until I put some more and better pictures next week.
I bought this a couple of years ago from the widow of the 68 y/o owner who suddenly died of a heart attack. he was fixing it putting new drums and brakes which are still in the rear cargo area. The Jeep has 52,000 miles on the body but he put an old Chevy motor from the late 50’s in it which could be from a Corvette of those years. The seats are all intact with one little tear but since they are old, I think they should be redone. It has some surface rust and little rusted through only on the driver side floor panel.”
https://portland.craigslist.org/wsc/cto/d/jeep-dja-project-with-late/6230139272.html
UPDATE: Still Available.
(05/06/2017) Looks like some value here.
“1948 Willy’s Jeep Delivery for sale. Very little rust. Montana truck.”
https://minneapolis.craigslist.org/hnp/cto/d/jeep-willys-panel-truck/6195225231.html
UPDATE: Still Available.
(04/09/2017) Inclues a hardtop and a PTO. Needs some bumper work.
“Running 1948 CJ2A. There is a dent if the front bumper and the frame horns should be replaced. Frame itself is straight and solid. Body is in decent shape but the floorboards are rusted in the normal places. Brakes work and have been rebuilt with new drums, cylinders, and lines. Frame and body ID tags are still attached and the jeep has a clean MN title that matches the tags.
Also has a hard top with doors, snowplow bracket, and an additional bracket coming off of the rear bumper. Would consider selling these separately.“
<– Day 5: July 25, From Earthly Mountains to the Plains of Vulcan | Day 7: July 27, The Lonely Road Home –>
Today the four of us travelled from High River on Alberta’s eastern slope to Grande Cache at the top of Jasper National Park. (See yesterday’s post here)
Our goal for the day was to traverse the length of Banff and Jasper National Parks. Because we felt the drive would be a long one, we began the day at the crack of 8am. I know that doesn’t seem early, but it sure felt early. The late nights are catching up to us.
Our first objective was to locate a mini SD card for our Go Pro. With few options open at 8am, we were forced to head north to the Walmart at Otokos. There, as I dashed inside to get a card, Fernando and Vidal drove to the gas station to get gas. Minutes later we pulled up behind them. Before I had a chance to place the gas nozzle into the filler hole, two kids and their father came over to tell me how cool the jeep was. I asked if they wanted to sign it and their faces lit up!
Once they signed, I began pumping gas. Meanwhile, Fernando and Hugo, who were in front of me, finished pumping their gas and waited for me to finish. About then, I began hearing a honking sound. Then another. Then another. I looked up from the pump and some woman was trying to get Fernando to drive away from the pump by honking her horn even though there were two other lanes open! No, she wanted the pump in front of me. Fernando tried to ignore her, but she was insistent, so he pulled out. Can you guess what she did? Continue reading