To Top

Fiberglass Jeep-looking Body for VW Chassis

• CATEGORIES: Features, VEEP (VW Jeep), Scamp, Others • TAGS: This site contains affiliate links for which I may be compensated.

Jason posted these pics of a jeep-looking fiberglass body with some unique aspects to Facebook. The hood is lower than usual vis-a-vis the fenders, the rear fender wells have a flare modeling into it, the rear mid-section looks slightly longer, it has a step with a runner along the entire side, and the rear has a unique flare on the back. Also, it is interesting that the top edge around the back is about as thick as a Bobcat or Parkette body.

According the discussion on Facebook, “I was told by the owner there was a local guy he in nh that was big into fiberglass I guess he also built cobra body’s and he made a few of these.” I suspect there aren’t many of these around.

veep-fiberglass-vw-body1 veep-fiberglass-vw-body2 veep-fiberglass-vw-body3

 

To Top

1946 CJ-2A Katy, TX $4000

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $4000.

(11/05/2021) Looks like a good price. Has a fiberglass body (possibly a Bobcat body). Sounds like it has a non-functional overdrive.

https://houston.craigslist.org/cto/d/katy-1946-willys-cj2a/7401729879.html

1946-cj2a-katy-tx96 1946-cj2a-katy-tx97 1946-cj2a-katy-tx98 1946-cj2a-katy-tx94

“Selling my project CJ2A. I just don’t have time to work on it.
Vehicle runs and drives, but I overjetted the carb when I brought it down from Colorado, so it’s very rich and hard to start.

Jeep features:
full fiberglass tub and hood
a buick oddfire v6 swap
transfer case overdrive (currently non-functional)
tilt steering
electric fuel pump
besttop soft tub and full soft doors (not pictured but included)”

To Top

1947 CJ-2A Sylva, NC **SOLD**

• CATEGORIES: CJ-2A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $7000.

Rare Parkette Bodied east coast jeep with, possibly, a rare bobcat tear drop hood. It’s a bit expensive for a project.

“Needs steering linkage and carb clean has small block 350 munchie 4 speed front and rear lockers built for mud racing been sitting awhile the body is fiberglass very light needs a good bath other than that it would make a great toy or weekend cruiser clean title pm if have any other questions 7000 obo ”

1947-cj2a-sylva-nc1 1947-cj2a-sylva-nc2 1947-cj2a-sylva-nc3 1947-cj2a-sylva-nc4 1947-cj2a-sylva-nc5

To Top

1949? CJ-2A? Covington, WA $5000

• CATEGORIES: CJ-2A, CJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $5000.

Lots of updates to this fiberglass bodied jeep. This has a Bobcat fiberglass hood and may well have a Bobcat body, too.

https://seattle.craigslist.org/skc/cto/d/kent-1949-willys-cj2a/7345982967.html

“1949 Willy’s CJ2A. Original frame and grill, fiberglass body. Has 6 point cage tied into frame with 3 beard suspension seats and 4 point harnesses. VERY rare Koenig Arctic top included. Needs to be sand blasted and repainted but no real cancer spots. Motor/trans: carbureted Chevy 327 with new plugs, wires, and alternator, dual electric fans, freshly rebuilt TH 350 mated to a Dana 18 T Case. Running gear: Dana 44 front (Detroit) and rear (spool) with 5.13 gears. Disc brakes all around with dual Wilwood master cylinders. Riding on Rubicon Express YJ leafs SOA with trac bar. 35×15 with tons of life left.

1949-cj3a-covington-wa5 1949-cj3a-covington-wa6 1949-cj3a-covington-wa7 1949-cj3a-covington-wa8 1949-cj3a-covington-wa9

To Top

Fiberglass Body Galesburg, IL **SOLD**

• CATEGORIES: Body Parts, Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $300.

This looks to be a good price. There are similar Bobcat-style wide-lipped versions of this body, but the steps were different. So, I’m not sure who the manufacturer of this body was.

“Fiber glass body including front fenders and hood. I know it fits a 1947 Willie’s Jeep but in May fit others.”

fiberglass-flattie-body-galesburg-il1 fiberglass-flattie-body-galesburg-il2

To Top

1951 CJ-3A Stanwood, WA **SOLD**

• CATEGORIES: CJ-3A, Racing • TAGS: , , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4250.

(10/28/2019) Has a Bobcat body and hood. Has custom suspension. May have been a racer.

“1951 Willys , fiberglass , 289 Ford engine. Too much extras to list., Runs but needs tuning. $4,250”

1951-flattie-stanwood-wa6 1951-flattie-stanwood-wa7 1951-flattie-stanwood-wa8 1951-flattie-stanwood-wa9

To Top

1948 CJ-3B Auburn, WA $5900

• CATEGORIES: CJ-3B • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: Still Available. 

I suspect this is a 1948 CJ-2A with a 3B fiberglass body. It appears to be a Bobcat body based on the wide rim around the edge. Could be a good price.

“Willys high hood. Fiberglass tub and hood. Steel fenders, grille, and windshield frame. New gunmetal pearl paint. Buick 231 v6 with edelbrock carb and intake manifold. 3 speed transmission. Warn overdrive. Front disc brakes. Aluminum radiator. New seats. Soft with 1 small tear in back. 33’s with a lot of tread. Overall pretty nice rig.”

https://seattle.craigslist.org/skc/cto/d/1948-jeep-willys/6335884667.html

1948-cj3b-auburn-wa1 1948-cj3b-auburn-wa2 1948-cj3b-auburn-wa3

1948-cj3b-auburn-wa0 1948-cj3b-auburn-wa4

To Top

1950 CJ-3A Bonney Lake, WA **SOLD**

• CATEGORIES: CJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4100.

(05/01/2017) There should be value here.

“Custom Willys jeep. 44’s front and rear, disc brakes all around, 5.0 lt Ford 302, T150, Dana 20, Fiber glass Bobcat body, fenders, hood and grill. Full cage, Onboard air with tank. New 35″ boggers on old school slotted mags. Heavy duty tie rods, square tubed crawler driveline, Lockers front and rear, Power Steering, Headers, new aluminum radiator and much more. This jeep has been sitting for about 4 years and will need some work. Currently not running. Call for details. Can deliver locally. $4,100 Trailer not included”

1950-cj3a-bonneylake-wa

To Top

1951 M-38 Issaquah, WA $4200

• CATEGORIES: M-38, trailer • TAGS: , , , This site contains affiliate links for which I may be compensated.

UPDATE: Still Available. Last listed in 2013. Includes trailer this time.

(04/03/2013) Desert Dogs, a winch, an overdrive and high gearing. Looks like a good Northwest rig. It also has the bobcat fiberglass hood. The steps appear modified.

“350ci chevy motor
12 volt system
3 speed trans. With overdrive
All 4 locking hubs, easy to tow with included tow bar.
Pto winch
Matching trailer 1953, with title
Myers snow plow,”

https://seattle.craigslist.org/est/cto/6019940281.html

1951-m38-trailer-issaquah-wa0

1951-m38-trailer-issaquah-wa1

1951-m38-trailer-issaquah-wa2

1951-m38-trailer-issaquah-wa3

1951-m38-trailer-issaquah-wa4

To Top

1953 CJ-3A Snohomish, WA $5000

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

Has a fiberglass bobcat body and hood.

“Its a 53 willies all original freshined up on running gear fiberglass body everything works ford 302 in it on 35 in tires its got a 3 speed twin stick tranny have another 5 speed tranny if you want higher gears.
Need to Sell Fast
5000 o.b.o
Trade for 4 runner lifted toyota”

http://seattle.craigslist.org/sno/cto/5906586822.html

1953-cj3a-bobcat-snohomish-wa-61953-cj3a-bobcat-snohomish-wa-8 1953-cj3a-bobcat-snohomish-wa-7 1953-cj3a-bobcat-snohomish-wa-9