emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
1963 M274 Willys Mule
$10,000 Clarksville, TN
INFORMATION FROM SELLER:
This bad boy is a 1960s M274A2 1/2-ton 4×4 utility platform truck designed for the U.S. Army and Marines. The engine was converted from a crank start to a button start.
1960 M-274 Willys Mule
$6,800 Willow Springs, IL
1960 M274 Willy’s early mule rare 4 cylinder engine
$6,800
Listed 6 days ago in Willow Springs, IL
INFORMATION FROM SELLER:
New fuel tank, new clutch and throw out bearings new shit linkages new shifter, new rear main seal, new mag, rebuilt steering box, new bottom seal cushion, all hubs serviced and boots replaced New muffler new exhaust runners and piping rebuilt fuel pump new fuel filter and bowl new fuel lines
Fully serviced ready to go all you need to do is paint it and get a new seat cover !
| 1963 Coot 4×4 OBO Vancouver, WA |
| Probably not a 1963 but what do I know, from what I found 1967 was the bulk of the build out of the COOT and 1968, but I don’t know a ton past doing a large newspaper lift on them over the past few days, They are pretty neat rigs. Kinda a big rabbit hole for me but it was fun researching these and no one had them clipped so it should be some new to you stuff coming up.
Not sure what this one is with the side bars on the side, another of let me know what you think. Full spread to follow this post. Dave posted one back in 2020, much nicer looking, https://www.ewillys.com/?s=COOT |
| INFORMATION FROM SELLER: |
| No history , was on some property we purchased. This is value as parts . Come look and make me an offer. Have boats and trailers also |
| https://www.facebook.com/share/1iMvfw1Mjg/ |
Here is a series of clippings on the COOT 4X4, its a really interesting vehicle, that was built in the 1960’s they made quite a few of these, they seem pretty capable for what they are, with a 12HP Air Cooled Engine, they had a super climbing ability at 75% grade, that had to seem pretty sketchy at the time. Not the best in the water but on a calm crossing they appear to be able to get the job done, but something with a little bit of wake and it would be pretty dangerous to cross something like that I would think.
Overall there was a single positing Dave did back in 2020 that I ran across, then there was one this weekend I found.
Due to the work this took, I wont have a ton of posts, these eat up the eWillys time I have set aside, so not a Jeep or a Willys, but I was fascinated by them, they seemed to be a neat part of the 4×4 story that could use a small lift to record some of the information.
General Specs |
|
| Drive: | High Traction 4- Wheel Drive |
| Tires: | 8.85 x 15 |
| Weight: | 1,000 lbs |
| Trans: | 2 Speed – Variable Speed Torque Converter |
| Engine: | 12 HP Air Cooled Engine |
| Body: | All Steel Construction |
| Brakes: | Lever Actuated Disc Brakes |
| Speed: | Max Road Speed 20 MPH- High Gear |
| Speed: | Max Water Speed w/ Outboard Drive- 5 MPH |
| Grade: | Max Climbing Gradient- 75% |
| Water Load: | 600lb Capacity |
| Seats | 4+ |
This was a pretty neat article……
Here are some COOT Ads from the late 1960’s, mainly it looks like they were launched in 1967 and had built out 1000 of them by 1968. The factory was in CHICO, CA.
These range from 1967 to 1969
| Winch PTO Driven $500 Point Pleasant, NJ |
| Cmment if you know the make and model. |
| INFORMATION FROM SELLER: |
| PTO driven winch, mechanical. Vintage. WW2 era. Possibly will fit deuce and a half 6×6, duck, Jeep, etc. Best offers. |
| https://jerseyshore.craigslist.org/pts/d/point-pleasant-beach-winch-pto-driven/7893472101.html |
| Braden Winch – $500 Wildersville, TN |
| Lot larger then the typical stuff we use, but thought maybe if you were building a larger Willys recovery rig this might be of interest. |
| INFORMATION FROM SELLER: |
| This is a Braden Model AMS8-15B. It comes with pto and drive line. It’s 20,000 lb, single line pull, 40,000 lb double line. It does have a drum brake. |
| https://nashville.craigslist.org/hvo/d/yuma-braden-winch/7908535424.html |
| Koenig PTO Winch- $450 Dallas, OR |
| Andy’s Picks |
| INFORMATION FROM SELLER: |
| Koenig winch for older Jeep CJ works good has dual shaft PTO. needs a little metal fab for mounting, but nothing major. PTO shaft needs some cleanup with emery cloth. No oil leaks or damage visible. $450 cash- |
| https://salem.craigslist.org/pts/d/dallas-pto-winch-for-older-jeep/7919580691.html |
NO PICS POSTED WITH THIS AD>
| Ramsey, Koeing and Warn Winches Listed a week ago in Littleton, CO |
| Andy’s Picks- Winches and pto shafts |
| INFORMATION FROM SELLER: |
| I have 3 Winches for sale -Ramsey 200L pto winch 8000lb -Koeing king model pto winch -Warn model 8000 electric winch Also have a couple pto shafts. Let me know if you’re interested |
| https://www.facebook.com/share/1Yr1RrQh6E/ |
| Vintage 1950’s Alaskan Camper $3,500 Ontario, CA |
| Andy’s Picks |
| INFORMATION FROM SELLER: |
| This is a vibrant Alaskan Camper, a type of hard-sided, telescoping truck camper known for its unique pop-up design.
Telescopic Design: These campers feature a unique hard-sided, pop-up mechanism that allows the roof to be raised and lowered, providing a solid-walled, comfortable living space that is also aerodynamic for travel. Versatility: Designed to be mounted in the bed of a pickup truck, they are popular among overlanding enthusiasts for their durability and ability to explore remote areas. Restoration Appeal: Due to their longevity and classic design, they are highly sought after by collectors for restoration projects, with many vintage models still functional decades after production. Lights work, great camper just in time for summer! $3500 OBO |
| https://www.facebook.com/share/1G4ePJCnJo/ |
| 1928 Willys Whippet $3,500 Kelso, WA |
| INFORMATION FROM SELLER: |
| 1929 willys whippit coupe is mostly complete motor transmission etc project true barn find stored in barn forever bill of sale only $3500 obo |
| https://www.facebook.com/share/16psevQBmo/ |
| Odd Stuff |
| Not a Willys |
| INFORMATION FROM SELLER: Not listed |
I think the one is a Suzuki, they other is listed as some sort of VEEP like thing. Either way they are not Willys but figure would post them up.
