emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
I don’t know if this is a good price or not.
“As is, HF/VHF Korean War Era jeep radio receiver/transmitter and power pack. I have never used it and the only thing missing is the tuning VU meter. This is an authentic accessory for the M38 jeep. If you are restoring an M38, this is a must have accessory.”
http://phoenix.craigslist.org/nph/for/5919951887.html
Seller also has a Ramsey winch and some other parts for sale.
“8500 lb PTO Winch from 1958 Willys pickup This winch is in great shape and only needs new cable. This winch has the PTO shaft, center guide with no damage, This should fit any willys pickup/station wagon or vehicle with T18 transfer case. I also have transfer case available and T 90 tranny I also have a similar PTO Ramsey winch that is complete currently in Willys Jeepster”
http://maine.craigslist.org/pts/5911362354.html
UPDATE: **SOLD** Was $350.
Seller has other early 2A parts for sale, too.
“Front weight for Willys CJ Jeeps. Weighs somewhere around 265 pounds. Also have a lot of other early CJ parts. Email me with what you need and I’ll check to see what I have.”
Looks like the windows are a little dark.
“Upforsale are some old authentic military canvas items that fit mb,gpw,m38 41-53 ? Selling all remaining items as is package deal $600.00 for all….pick up in person cash.”note” I do not have any hardware or roof bows..
-2 canvas tops
-4 side curtain sets
-1 matching door set & some other misc doors”
http://sfbay.craigslist.org/sby/pts/5915216360.html
David’s got these parts for sale. He suggests making an offer for the whole package.
1. 1956 willys wagon 3/4inch trim includes door ,body and tailgate trim $125 http://york.craigslist.org/pts/5914754451.html
2. Full set of hubcaps ,front caps ready for lockout hubs $150 http://york.craigslist.org/pts/5914762489.html
3. 1956 wagon steering wheel horn button $40
4 (3 items) http://york.craigslist.org/pts/5915138746.html
a) YF carburetor used off a wagon226 $50
b) WO carburetor used from a cj3a $75
c) Willys wagon 226 fuel pump used $50
Dan spotted this great price on a hard-to-find speedometer. I believe the seller also has some other parts for sale.
“A very nice 50’s willys/Jeep speedometer. Was working fine until the needle fell off and I imagine it would work fine again if it was reattached. I’m not sure if the temp or gas gauge work as I didn’t have them hooked up. I didn’t want to risk messing up the bezel trying to get it off. My wagon is definitely not a show car so I just got a reproduction to replace it. These originals are getting quite rare especially unfaded as this one is! A steal at 50 bucks but I’d rather sell it locally then deal with shipping it.”
http://seattle.craigslist.org/skc/pts/5904055920.html
UPDATE: **Status Unknown** Was $400.
Could be a good price.
“steel meyers jeep top that fits a willy’s CJ3-A”
Top and parts for sale.
“Jeep CJ2A aluminum hard top. All sections in decent shape; will need some straightening but not bad. Glass is good in the back hatch, the rest will need replaced. $350.
A set of 11 inch brake drums and hubs. $30.
Also have a pair of hard top doors (green) with good glass that should fit a CJ5. $100 for set.
Finally, I have some T90 transmissions and Spicer 18 transfer cases. $175 for all.”
http://kpr.craigslist.org/pts/5898729144.html
Great price on scatter shield. Of course, this appeared after I already bought one. At least this one has the cover plate.
“May also fit the Buick, Oldsmobile and Pontiac. Fair shape. Had a Muncie bolted to it. Could be a Lakewood. Vintage Chev. 4 speed.”
http://portland.craigslist.org/clk/pts/5894809526.html
UPDATE: **SOLD** Was on eBay.
Josh has listed this crankshaft pulley, a part used to power some early Ramsey winches. This video tells more about Ramsey’s crankshaft driven winches:
“You are bidding on a nearly impossible to find positive crank shaft driven winch/pto CLUTCH PULLEY. I believe this example was manufactured by Ramsey and is the key piece for a number of winches used on vintage jeeps.
The assembly appears in good shape and complete but could provably use good cleaning and some refreshing. The pulley unit is the only piece I have.”
Could be worth a look.
“1948 willys jeep tub in fair shape, needs repair, includes grill, tailgate, hood, also includes the rotary jig”
http://saltlakecity.craigslist.org/pts/5886668455.html
There may be $300 worth of value here.
“I have some parts that I do not need from a 1946 Willys Jeep. Front axle with part time hubs, rear axle, gearbox, transfer case, windshield, skid plate, several rims. $300 for it all. I am in Chilliwack BC Canada, 20 minutes from the Sumas Wash. Border, about 3 hours north of Seattle. ”
http://seattle.craigslist.org/see/pts/5885263467.html
