“Spicer 18H PTO, Driveshaft & Gearbox removed from a 43 Willys $400/OBO
Email Kevin. All prices negotiable”
Parts Research Archives
Flattie Parts in Hickory, NC **SOLD**
UPDATE: **SOLD**
There might be something useful here.
“I am parting out two CJ-2a Willys Jeeps and have parts from other restorations. T-90 transmissions parts and engine parts like blocks, heads, oil pans. Have two good frames for CJ-2a a windshield frame for 3-A PTO parts, fenders for ’50 pick-up . Can also recondition parts if needed and/or total restoration of CJ-2, CJ-3, jeepster or Pick-up. Email questions or parts needs.”
Willys Truck Parts St. Louis, Mo **SOLD**
UPDATE: **SOLD**
“I have many parts from 1950-1960 Willys Trucks and Wagons. I have too many parts and not enough space. I need the room to finish my restorations. Below is just a SMALL list of the parts I am looking to sell. I don’t have any set prices here since I am not looking to get rich, just need space. Make me an offer on the part(s) you want. Im flexible and fair.
Dana 25 5.38 gears (4 cyl)
Dana 25 and Dana 44 4.88 gears (6 cyl)
Original Sears Lock out hubs for Dana 25/27
Bed
Radiators
Guages
Splash pan
T90 and D18
If you don’t see what you are looking for just drop me a line and I will see what I can do for you. I can also send pics of anything via email or phone. Thanks for stopping by!
’46 – ’52 Willys Parts Sunbury, Oh
No pics provided.
“Parts for 1946-52 Willys CJ-2A JEEP. I have a wide assortment of original parts including an engine,transmission/t-cases,axles,frames,tailgates,windshield frames,hoods,grilles,16″ wheels,tires,body tub,radiators,generators,starters,and various small parts. Call Jeff at 740-972-5055”
Jeep Trax for TJ Pocatello, ID **SOLD**
UPDATE: **SOLD** Was $5000.
Josh spotted these rare Trax for sale.
“SELF BUILT TRAX. FOR JEEP TJ TRAX ONLY FOR SALE. MAY FIT OTHERS THEY HAVE A 5 ON 4.5 BOLT PATTERN. WILL NOT WORK WITH MANUAL HUBS.”
Meyer Snow Plow Salt Lake City, Ut $500
The jeep will be sold, though unclear if it is for sale right now.
“NOTE: Having not been used this season, in testing unit, power angling was too slow. Thus, all three solenoids valves are being replaced as of 4 February. Plow, lifting and mounting assemblies are to be removed from Willys Jeep. (Jeep to be sold separately). Call for details
801.278.6344”
Flatfender Parts Denver, Co
No pics provided.
“Willys jeep parts. New diamond plate corner panels( never installed) Hood, body(rough) CJ3A. MISC PARTS 2A-3A- M38. ALSO HAVE MANY DAUNTLESS 225 PARTS. INCLUDING A FOUR BARRELL HOLLY MANIFOLD. MUST MAKE ROOM, OTHER ITEMS INCL. 1500 GMC HOOD. AND 65 MUSTANG VALNCE AND TAIL LIGHTS. CALL JOHN 303-669-3417”
1942 Willys MB Parts Sumner, WA **SOLD**
UPDATE: **SOLD** Was No Price.
The grille tines look straight.
“leftover parts from a willys flatfender project I abandoned. came from a 42 willys mb, but they should fit other jeeps. good hood, and grill. decent fenders, and one good seat frame.
call Alex”
2 Jeepster NOS Grilles Aberdeen, MD $285 for the pair
Doug spotted these.
“I have two vintage Willys Jeepster or Jeep pick up truck grilles. 1940’s or early 1950’s. New old stock. Found in the attic of an old building that was a Willys dealership back in the 1950’s. Solid straight condition. Still in the red primer. Some surface rust and lots of dirt from years of storage. $285 for the pair. Call Ron 410-273-2489. Aberdeen, Maryland. Thanks!”
Stuff I have for Sale
UPDATE: Master Cylinder, Handle, Hinges and heater are sold.
I’m cleaning up the garage and have items I’m not going to use. Perhaps someone needs them? d@willys.com …
This is a 1949 CJ-3A drain that sits under the hood and is supposed to act as a drain for water that sneaks in along the rear of the hood. It’s not in perfect shape (some dings), but I can’t remember seeing one for sale. $10 + shipping.
Brand new spring bushings (1955-1975) (6 total) free +shipping
Dana 18 parts. I can send gear numbers if necessary. Make offer.
Leftover dana 20 gears. Make offer.
CJ-2A/3A/3B Half Cab Top Manitou Springs, Co $400
No description of the condition and no pics of the actual top.
“CJ2A, CJ3B, Half cab, comes with metal doors, roll up windows, been in storage for 40 + years.”
Willys/Jeep Parts Little Falls, NJ $200
A misc collection of items.
“Contact Mike- 973-650-0689. Parts from M-38 and CJ-5.
Driver Seat- $25 solid and no rust, has plywood attached, metal supports still there and origional
Gas Tank-$50 will fit M-38, CJ2A, CJ3A, and Early CJ-5 solid tank, no rust inside or outside. needs to be cleaned
Floor Pans- $5 each, from M-38 and early CJ models.
Tool box lid- $10 no rust, hinges solid, includes latch
Master Cylinder- $10 needs to be rebuilt
Two Brake Cylinders-$10 for both, need to be rebuilt
Transmission support plate and bracket, M-38 and CJ2A type- $40, both solid and have been cleaned and painted
L-134 Exhaust pipe from manifold- $5 solid, no holes
Windshield wiper motors-$10
Windshield wipers-$5
Heater that fits under the cowl- $20
Horn- $10
Brake pedal and clutch assembly- $20
Carter Carberator- Not sure of type- $20
British carberator- not sure of type- $10
Brake line guards for dana 25 front- $5 both are in rough shape
4 leaf spring shackles inner- $ 5 each, all four are brand new, will fit all Willys Jeep models
Two body mount brackets- $5 each, brand new, will fit all Willys Jeep Models
CJ-5/FJ speedometer- $5
CJ fuel gage-$5
Fuel Pump-$5
Directional assemblies- $10 each
Parking Brake Handle-$10
Take all for $200, Mike 973-650-0689”



















