This looks like a pretty good truck.
“1949 Willys Pickup. 4×4, 4 cylinder. All original. Nice little truck to restore, just too many projects. Not interested in any trades.”
http://eugene.craigslist.org/cto/2426991247.html
This looks like a pretty good truck.
“1949 Willys Pickup. 4×4, 4 cylinder. All original. Nice little truck to restore, just too many projects. Not interested in any trades.”
http://eugene.craigslist.org/cto/2426991247.html
This has some rot, but it also has character. It runs and plows.
“1961 Willys Pick-UpTruck
Factory 6 cyl Hurricane Engine
4WD with High and Low range
3 Speed Manual transmission
Comes with a Central Hydraulic Controlled Snow plow in working condition
Has tire chains on all 4 tires
Garage kept for at least the past 10 years
44,304 ORIGINAL miles
Has surface rust and ROT but is very fixable for how bad these trucks can get
Has made an EXCELLENT plow truck for me.
Would make good plow truck or a good fix-er-upper(it is all there with some extras)
Asking $1500 or best offer
Call My Cell if interested. NO TEXT MESSAGES, Rich 610-533-6093”
UPDATE: **SOLD** Was $6000 for all.
1954 CJ3B for restore or parts. Has chevy v-6, 4 speed, adapted to stock dana 18 tcase. Clean drive-train, motor is free. Body and frame good condition. Missing parts but great potential. Have old title not in my name. 600 firm
1948 CJ2A Buick 231 v6 mated w adaptor to original t 90 tranny and dana 18 t-case. Runs good, 4×4 works great. Has low gears, 33″ tires, full roll cage, welded rear end. Great woods machine. Body good for age, needs restore or for parts. 2500 firm
1950 Willys pu truck Custom, built solid for rock crawling with 1 ton parts. Needs finishing, but does run and drive ok. Saling as project or for parts. Must check out Chevy 454/ turbo 400 auto, 205 gear drivin tcase, to Dana 60 Front end with new parts, and 14 b full floater rear welded right. Truck Advenger carb, painless harness, autometer guages,performance top-end, 42″ swampers almost new on 15″ beadlocks. Power sreering and brakes. A real beast on the trail. 4000 firm
Also have stock rebuilt go devil 134 l-head engine for Willys Jeep. been stored fore 2 years. Has tranny and tcase, will separate. 500 for engine 200 for tranny tcase, 6000 for all, firm”
UPDATE: **SOLD** Was $1500.
This looks pretty solid.
“1955 willys truck. body is streight and does not have any major rust. ”
No pics provided.
“1962 willys pickup truck…complete, except front bumper…still has metal bed…ran last fall…needs carb work…both need work…probably not good candidates for restoring, but would make good drivers…asking $1500. each…no pics..802-728-9682..ok to leave message…or email…thank you”
Here’s a nice looking truck over at jeeptruck.com for sale.
“1959 Willys Jeep 4×4 Pickup Truck 226 CID L-6 SP. Hurricane engine. $8,000.00 OBO. This truck is in good overall condition and runs nicely after extensive recent work. Has desirable Warn overdrive – and body is in good shape. Some rust problems that will need to be addressed. Truck lovers will fall in love. Must sell in order to consolidate.
Just completed:
carburetor overhaul
ignition repairs
headpipe and gasket replacement
valve adjustment and manifold resealed
custom build heat riser
various wiring replaced
lube and drivetrain inspected”
Steve spotted this ad. No pics provided, but the builder assembled the front from Bronco II and the rear from a F-250.
“This is a particular vehicle for a particular buyer. Former daily driver but has been sitting for the past two years.
This was hand built, and would suite a collector or restorer nicely. Registered as ’53 Willys but is in fact only the body sitting on two frame halves welded together. (front-Bronco II, rear F-250)
Ford big block engine: 460 (dual-plane intake manifold, 780 Edelbrock carb, roller rockers, ported heads, Hooker headers) approx 20k miles since rebuild; American Racing 17″ aluminum wheels; BF Goodrich g-Force T/A KD tires (brand new but slightly weathered). Interior is very minimal, but does have a few original gauges and heater.
This has alot of sentimental value so finding a buyer who will appreciate it would be optimal.
Pics are available upon request for serious inquiries. ”
UPDATE: **SOLD** Was $5000.
Here’s a modified truck with a tilt nose.
“1953 Willys Jeep Pickup. Has a 327 Chevy engine. Turbo 400 transmission. 205 transfer case. Automatic (some steering issues)Ford 9″ rear end. Front disk brakes. (some brake issues) high rise manifold,with new edelbrock carb. RV cam, Chrome plated headers. 39″ Super Swampers(half tread) on 15″x10″ aluminum wheels. Roll bar. Fuel cell. tilt hood, some rust. Needs work. Excellent crawler or custom project for a hard to find classic. Location of Truck is Sheridan Oregon.”
UPDATE: **SOLD** Was $2500.
This is missing some trim andother details, but looks pretty good. There are a few dings and dents.
“1951 Willys Overland Pickup
serial # 451-EC1 20501
GVW 5300lbs
First year for overhead valve 4 cyl. 4WD
This Willys truck came from a ranch in Cayucos, Ca
It has never been registered for the street, comes with bill of sale.
Engine was rebuilt about 5 years ago and was parked.
Check out the amazing patina on this truck!
Starts up and runs perfect, Quiet, smooth and no smoke!
Brakes need work from sitting.
Come see this barn find or see it on flicker and
You Tube.
Asking $2500.00”
UPDATE: **SOLD** Was $3000.
“250 Chevy Engine, Cab High and ft board racks, Newer seats, can pull smaller trailer.”
UPDATE: **SOLD** Was $2900
(03/25/2010) Here’s a solid looking truck.
“1951 Willys Jeep pickup. 4×4 231v6 buick motor that needs little work. 3 speed tranny, This is a super solid classic truck with original interior.”
UPDATE: Was $2000. **SOLD**
(04/30/2011) If the rust is light, this might not be a bad price.
“1948 WILLYS PICKUP WITH GOOD NEBRASKA TITLE. (4) FOUR WHEEL DRIVE, 12 VOLT ELECTRIAL SYSTEM. 1959 SMALL BLOCK CHEVY MOTOR, WITH ELECTRIC IGNITION
NEW BATTERY, STARTER, PLUGS, FRESH OIL. RUNS GOOD BUT NEEDS CLUTCH AND BRAKE MASTER CYLINDERS INSTALLED. HAVE USED WILWOOD BRAKE AND CLUTCH MASTER CYLINDERS AND PEDALS
BODY HAS SOME RUST,VERY GOOD GLASS, REAR FENDERS NEED WORK, 4 KEYSTONE STEEL SPOKE RIMS”