This FC only has a few hours left in the auction. As of Tuesday night the high bid was $4300.
“1958 Willy’s Jeep FC150 pickup truck
Miles: 29,998 on odometer
VIN: 6554815909
Engine
Cylinders: 4
Fuel type: Gas”
This FC only has a few hours left in the auction. As of Tuesday night the high bid was $4300.
“1958 Willy’s Jeep FC150 pickup truck
Miles: 29,998 on odometer
VIN: 6554815909
Engine
Cylinders: 4
Fuel type: Gas”
UPDATE: **SOLD** Was $500.
/Listed as a Meyers hardtop, this is actually a Koenig 555 Super Half Cab for the CJ-5.
“I got this Meyers half cab hard top for my ‘67 Jeep CJ5, but I am coming to the realization I will probably never get it cleaned up and on my Jeep. All glass is intact. Driver door is missing the hand crank. Would look great on a CJ6 as well. These are getting harder and harder to find for these old Jeeps. The last photo is what it would look like assembled. Located near the border of Riverton/Herriman, UT approx. 14000 South and 5200 West. Asking what I paid $500, but will consider offers.”
Seller has another parts top for sale, too.
https://www.facebook.com/marketplace/item/631299368409095
“Just surface rust. Was on a 1950s cj5. Erie PA 16510. All glass is plexiglass. I do have another CJ5 hard top for sale ( scrap ) but has the sides & rear Glass all intact. I’ll include if purchased.”
This might be worth a look depending on what “TLC” is needed. It sound like it might not be running. It has some early Free-Lock hubs.
https://www.facebook.com/marketplace/item/6171383709576241
“1963 Jeep Willys CJ5 with Koenig1/2 cab. Jeep will run. Needs some TLC. Fun little jeep.”
UPDATE: Correct pics now posted (thanks Allan).
The body has been modified and there seems to be some CJ DNA in that body.
https://www.facebook.com/marketplace/item/706849228123353/
“Hard to find Ford GPW jeep with all new floor huge tires 2 new aluminum gas tanks new spring leafs with ford 289 and transmission came out of running vehicle have some extra parts for engine”
Joe-in-Mesas shared this custom flattie.
https://www.facebook.com/marketplace/item/1481479402258412
“Willyzuk project. 47 cj2a/ 82 Suzuki samurai.”
UPDATE: Still Available.
(03/16/2023) This 3B is partially disassembled. The seller posted an early Kelly hardtop brochure as one of the pics, but he actually has a Kelly series 23 top produced in the 1960s. The TC is likely a Dana 18 (not Dana 41) and the diffs are likely Dana 25/44 (not 18/44).
https://www.facebook.com/marketplace/item/219552757299562
“1954 WILLYS CJ3B. ALL ORIGINAL! CLEAN TITLE! BARN FIND! This CJ3B only has 38,715 original miles? It was purchased for a ranch in Colorado and stayed in family. This CJ3B also had the option for the HARD TOP. All glass is original and intact. NO CRACKS. I began the project and cant finish. Motor runs fine and was running before I started to restore. I was going to keep it all original. F4-134 Hurricane 75 HP engine, T90 3 spd. trans, Dana 41 TC, Dana 18/44 diffs.
Grill is perfect and blasted ready for paint. Hood and fenders are blasted and can be repaired for dents, etc. Or you can buy new ones. Hood is also blasted. NEW tail gate. Original seats are reupholstered! The radiator has been rod cleaned and tested. Rust is all surface rust. Some rot in tool box. Could be repaired. Lots or new parts ready for restoration completion; NEW suspension, New gas tank and sending unit, NEW shocks, NEW Floor pans, NEW 6 volt battery, NEW tail light, NEW; Mirror and arm, Grill webbing, Clutch and brake pedal felt, Oil hose and filter, E Brake cable, Battery hold down, Accessory pedal boot, Light switch, Wood hood blocks, Brake adjustment cover, body mount, fuel line tubing.”
UPDATE: Still Available.
(06/20/2023) Seems worth a look. It includes a Sears Deluxe hardtop.
https://www.facebook.com/commerce/listing/915471539547932/
“This Willys CJ2A is in pretty solid shape with good floors, tub and frame. I haven’t found any severe rust that I’d worry about. The paint is peeling up, but the panels are quite straight and ready for a new coat. It has a soft top under the hard top, a spare tire carrier and all the glass. This little champ ran and drove when I got it, the previous owner had put an industrial l134 under the hood. It had a head gasket leak and enough water got into the crankcase that is developed a knock. I shut it off immediately, so that motor is definitely rebuildable. I put the original motor back in it, an l134 that was recently rebuilt before seizing from sitting. I got the pistons free but one of the valves is still stuck, I’ll continue trying to break it loose. No title. I’m looking to sell it for the 3k I have in it, since I don’t time for it anymore or the facilities. Ask me anything else you want to know!”
UPDATE: Price dropped to $2500.
(03/13/2023) It’s supposed to have a front/back PTO setup, but no pics of it.
https://www.facebook.com/marketplace/item/903611747567275
“1957 narrow front axle Jeep FC150. not a common vehicle. This one has chain drive PTOs front and rear, and an intact front window! These are known for frames cracking and this one needs a few places repaired. Comes with both axles. Has 4cyl hurricane, unsure if it runs or not. Definitely a project but an interesting one. Comes with a bill of sale, but won’t be hard to get a title for it. Bring a trailer, of course!”
UPDATE II: Here’s another 1950 Salgittzer brochure from Germany, but it is only four pages. Thanks to Jan for sharing it! This makes three different 1950 brochures.
========================
July 12th UPDATE: I received both of the Salzgitter brochures I purchased out of Germany. The 1950 brochure is a version lacks several of the pages shown in the brochure at the very bottom. The 1949 brochure is a tiny (1/4 sheet-size) one-page brochure.
