UPDATE: **SOLD** Was $3000
This may be worth a look.
“1946 Willy Jeep, vinyl top & tow bar. Great for hunting & off road travel.”
UPDATE: **SOLD** Was $3000
This may be worth a look.
“1946 Willy Jeep, vinyl top & tow bar. Great for hunting & off road travel.”
UPDATE: **SOLD** Was $6000
“FOR SALE OR TRADE: CLASSIC, hard to find, 1948 Willy’s CJ2A Jeep, 4×4, 4 cylinder, 10 ton wench, built in gun rack. The hours of off-road adventure can be yours! Excellent condition. Cash price $6000 or trade for your Mule, Ranger, Side by Side ATV.”
UPDATE: **SOLD** Was $7800
(01/11/2014) Lots of updates to this rig.
“1947 flat fender built from the frame up. It is equipped with a new Chevy 350, holly projection fuel injection, HEI distributer ,T18- transmission ,
Model 20 transfer case, Dana 44 front and rear,Detroit lockers front rear, on board air,8000lbs warn winch, 33”x12.50”supper swampers,
Jeep wagoneer springs, large fuel tank, full cage, best top full top( in good shape)collector plates. Great wheelin rig”
UPDATE: **SOLD** Was on eBay.
This is a nice looking rig.
“Must see in person to truly appreciate ( i know everyone says that but i serious), color is not as overwhelming, and truck really is sweet.
Up for auction a 1947 CJ2a show or go Jeep, this jeep has been in many local shows and has taken home loads of hardware for being so unique and in such great condition. Restoration completed about 3 years ago with only 500 miles since restoration. 95% of this jeep is new, from the engine and transmission to the rear axle spindles and bearings and gears of the rear end with all receipts to prove it, even minor components such as cowl weatherstripping and fuel tank neck grommets have been replaced…..outside of the dana 18 transfer case and front axle, and front drive shaft, pretty much everything else has been replaced with new upgraded components!!! Truck is powered by a 300hp 350 Chevy Crate engine (less than 1000 miles, edelbrock endurashine top half with dual 500cfm edelbrock thunder series carbs, RPM Air Gap Intake, MSD pro billet dizzy, Novak built sm420 tranny 4 spd with super low drive shaft breaking 1st gear, dana 18 twin stick transfer case, patriot tight tuck headers, 22×19 Aluminum racing radiator (with both mechanical and electrcial fans), Currie Axles, Currie Built Ford 9″ rear end with 4.11 gears, Saginaw High Steer Steering box, NEW 33inch tires, 3 inch lift, custom interior, custom built heavy duty rear drive shaft, Rhino lined gloss black bed; powder coated bumpers, winshield frame and roll bar. Base/Clear paint. Both white rims and chrome rims are included with sale. Jeep can be driven on highway w/o any problems Only the endurashine dual carb setup is included with sale, I live in Buffalo so I’ve got over a foot of snow outside and had to use pics from past couple seasons that i had on hand, so the only thing different is carb setup, will post agian during nicer weather if jeep doesnt go for my reserve”
This might be worth a look. Unclear what isn’t working.
“For Sale: 1946 Jeep Willys CJ2A on a CJ5 frame? Also comes with Dana axles and 225 V6 Buick engine. This is a very neat looking beast that could be loads of fun as well as a real eye catcher. I purchased this as a project to upgrade with my son, but find myself with too much else going on. This is drive ready and most everything works, but it is clearly not a highway vehicle. It also comes with a full soft top (not pictured). Email or call me if you have questions or want to come look at it. Serious inquiries only. The price is firm.”
UPDATE: **SOLD** Was $4195.
The body is painted with rhino covering.
“1948 Willis
4.3 liter
Throttle body Fuel injected
Came out of an early 90’s truck
Rhino covered in red
New top in 2006. Zips all around
Off Road
On Road
Deer Camp Special
Street Legal
Please call or email for info”
UPDATE: **SOLD** Was $1500
This is . . . unique.
“47willy jeep title runs good have tub fenders grill lights ect call for test drive”
It needs some work.
“I am looking to sell my jeep. I have owned it for about 10 years and looking for something different. Nice shape but the master cylinder is leaking, and it needs a battery.I have a lot of extra parts. Engine has very low miles on complete rebuild and trans and tranfer case were gone thru also. I have advertised before and have had some interesting trade offers. Kinda wanting a vette or mustang , camaro, convertible, something like that. Also have a 28 International rat rod pickup project for sale or trade also. Very good project with a lot of patina. Email with ph. # for reply. Iwill not respond if I don’t think you are for real.”
UPDATE: Price dropped to $800
(01/19/2014) Looks like a project.
“Gm iron duke 4 cylinder engine. Does run. Needs some steering repair. Has aluminum hard top. Call for details
Scott
541-968-8425”
UPDATE: **SOLD** Was $1500
(08/20/2013) This is a project.
“Project Jeep needs to be put back together.Rebuilt Ford 260 v8 with aftermarket cam and 4 barrel carb. Less than 10,000 on engine.Runs great.T-90 transmission needs to be rebuilt.Transfer case works good.Has Pinto steering column and Saginaw steering box.Electrical system is 12 volt.Brakes are 11″ drums and duel master cylinder.Needs top.Have brand new electric wiper motors.Comes with extra windshield,grille,front fenders,3 tailgates and extra complete front and rear axles.”