1955 Jeep CJ-5 $7,500 Lewiston, CA

Couple things going on with this one, dash is a little like an M38-A1 of sorts, but the tub almost looked fiberglass at first to me, but it looks to have the Jeep imprint on the side.

I think it is a CJ-5 Base as posted and was assembled with a few different things that is fine.

Looks like they have some work in this one. Sideways photos are never fun to see what’s going on.

Information from seller:

Up for sale is another Sweet 1955 Jeep CJ five. Has a four-cylinder engine, three speed transmission and four-wheel-drive. Budget build frame off restoration. All the running gear has been completely gone through. Many NOS parts, no top or doors. Runs and drives great. Come for a test drive today. 7500 or best offer. Clean title in my name. On no op. Located in Lewiston, California. delivery available upon purchase.

https://www.facebook.com/share/1CeVn6reMM/

1956 Jeep Willys CJ-5 $2,000 Placerville, CA

So I got nothing on this one, it’;s really rough, maybe you need some parts for a project but with the overall condition I would worry about most anything off this one that is drivetrain so talking like brackets and the smalls.

The real reason this stood out was the Data Plate, a little while back there was a CJ-6 where the Model Number was smaller then the Serial Number, and here is another similar age almost identical model number smaller then serial number and the screws are legit Willys data plate screws IMO.

The Data Plate is tad Wavy so I think its been off the rig one time, probably to paint it red, who knows.

So just adding to that story for folks. My initial guess is that they pre-stamped these model numbers in a different area then the final Serial Numbers and the Stamps were different, who knows, that’s my version of the story.

Would like a Milwaukee Battery Drill be a good trade for this? Too much? I’m kind of at grab something off a Holiday Sale rack and try it out as a trade if you need some small bits off this one. But like have a bit driver set with the deal so it’s turn key here is a working drill/impact and some new bits and drivers load up and head home.

I have a ’48 Parts Truck that would work for that thing all day if the person needed the thing.

I think even the smaller Snow Blowers is too much trade anymore they are darn pricey.

Information from seller:

It’s beat up but it’s a willeys. Classic car. What’s it worth to you? Let me know. Will do trades

https://www.facebook.com/share/17fRxhxUdv/

1959 Jeep Willys CJ-5 $4,500 Solvang, CA

CJ-5 Looks Solid. Has OD and sounds like a driver, not a bad price point.

Information from seller:

1959 Willys Jeep CJ5. Fair condition. Warn Overdrive. Converted to 12 volt. Runs and works properly. Lived on a ranch for at least thge last 40 years. No title, Bill of sale only.

https://www.facebook.com/share/1FfnZpfRbr/

1966 Jeep CJ-5 $1,250 Hesperia, CA

Price is not horrible, it’s a project or parts.

Information from seller:

1966 cj5 225 v6 . I have. Had this jeep since nineteen ninety five. I have pink slip.I just can’t find it right now. Going to storage today. The rear license plate is missing and I know I have them together. I also bought a complete drive train from a ninety nine suburban that I was going to use for it but I need to keep the motr and I will throw in the transmission an transfer case for another five hundred. UPDATE… PAPERWORK IN MY NAME ON NON OPP

https://www.facebook.com/share/1JuvEajswQ/

1956 Jeep Willys CJ-5 $16,000 Fremont, OH

Lots of work done on this one.

Information from seller:

1956 Jeep Willys This was a complete rebuild, we removed all engine and transmission and went through every part. New cab/body and new paint on body and frame. 40,000 original miles. 3 speed manual transmission. Over drive kit New interior seats. Rear bench seat. New roll bar. New soft top (removable). runs and drives great. Cab heater. Please message if you’re interested, if it is posted it is still available. Pick up available in Fremont. $16,000.00 obo.

https://www.facebook.com/share/17Uh7UVynP/

1963 Jeep CJ-5 $7,000 Kingsford, MI

Listed 4 weeks ago

Neat looking rig. Not may details or pics. But cool half cab set up. Stout rear bumper.

Information from seller:

All original, no rust, solid, motor good

https://www.facebook.com/share/17cywGm2km/

1964 Jeep Willys $4,000 Cushing, MN

Listed 10 Weeks Ago.

Looks like a neat rig, lots of little items added. V6, Hard Top, Plow Frame, Cup Holder.

Information from seller:

Rare vintage collector’s 1964 Willys Jeep. Runs good. The engine and body are good. Always been stored inside. 6 cylinder, 4WD works good. Great for a deer shack or plowing snow. Considered the first production SUV. Collector plates. Located in Cushing MN. Serious inquiries only. I’m posting this for my Dad and will be forwarding all messages to him. Please include a name and phone number. Thank you

https://www.facebook.com/share/17QKE5vV7p/

1958 Willys jeep CJ-5 $6,000 Melrose, WI

Listed 12 weeks ago

Wow cool seats, plow rigs can be tricky at times, but this one looks pretty solid, but not a ton of pics.

Light bar is slick, this thing must have been wild back in the day plowing.

Information from seller:

$6000 firm. Has 6’6” Meyer plow included. Runs great. 3 speed transmission.

https://www.facebook.com/share/1JdSZygcJH/

1957 Willys Jeep CJ-5 $5,700 Rochester, MN

This was listed back in Oct, it is now reposted 4 Days ago, still looks like a cool rig.

Love the graphics and the accessories. OD, Winch, Rear PTO, this has a lot here. Looks solid has some stuff it comes with.

Previously on eWillys:

https://www.ewillys.com/2025/10/15/1957-jeep-cj5-5500-minneapolis-mn/

Information from seller:

Being offered is a highly optioned 1957 Jeep CJ5 SUV with 18,878 original miles. This piece of equipment is fitted with a Ramsey 246R PTO driven front winch a Koenig model 50 202 PTO gear box and rear facing PTO and Warn overdrive. There is also an adapter to allow all of that to work in harmony with the Transfer case. The Jeep is also fitted with Saginaw power steering and power brakes. The F134 inline 4 cylinder is locked up from sitting for the last 2 years but, shouldn’t take much to get it freed up. I also have a “free” not stuck f134 T90 3 speed and d18 transfer case if you would like to negotiate on that as part of the sale. The CJ5 was used at a business in NW Minnesota it’s entire life to run a piece of equipment off the rear PTO thus the low miles on the Jeep. The body is in very good condition considering the year showing some rust on the outer drivers floor board. I have the fuel tank for it as well as a pair of doors, not installed yet. This would make a super neat project

https://www.facebook.com/share/14PbMZ9DgGw/