This French brochure highlights a diesel jeep for a CJ-3A.
“Brochure JEEP WILLYS INDENOR DIESEL”
This French brochure highlights a diesel jeep for a CJ-3A.
“Brochure JEEP WILLYS INDENOR DIESEL”
This 35 page book looks interesting. It’s a reprint, but may be an old reprint.
“From a cache of WWII military jeep and motorcycle parts hidden away many years. A number of books and manuals were included.This is a 35 page Photo book produced in 1942 for introduction to the troops of the 1/4 ton 4×4 vehicle Reconnaissance later known as the Jeep. It’s filled with photographs and details for the use of the jeep vehicle. The book measures 8 1/2″ x 11′.with 35 pages, it’s listed as used, as I don’t know it’s actual history so listed as a reprint, great original period photographs and jeep details.”
Can’t be too many of these records around.
“This is a Promotional Item Card Board Record 78 RPM around 1960. Very Rare Item !”
This photo shows off a unique full hardtop. It looks like the top is magnifying the antenna.
“Original factory photograph , 8 x 10 , 3 original stamps on reverse , ” Lawless & Son , Houston , Texas ” , “Koenig Iron Works , Houston , Texas ” .”
Here’s an instruction set for the Koenig Jibby Cab.
“original Non Color Folder , 8.5 x 11 Folded , 17 x 11 Unfolded , No Cars Shown , Installation Instructions For Jiffy Cabs , Models 520 Full And 525 Half For CJ-5 , And Models 620 Full And 525 Half For CJ-6”
UPDATE: There’s a new website for the magazine: https://www.dispatchermagazine.com
Norris-Banonis just released their Spring 2017 issue of their Dispatcher magazine. It’s their third year of publication and the unique articles continue. Topics covered in this issue include a review of Bill Spears’ War Baby by Fred Caldwell, an article by Jim Allen on the Jeep Honcho, a piece on the Esslingen Ordnance, the first of a two-part article on Charlie Wilson and the Wilson Foundary and more. If you haven’t subscribed yet, check it out at http://norris-banonis.com/dispatcher.html.

All work and no noodles makes David grumpy! Good thing I found a new Ramen noodle place just a few minutes away from my parents. I had them add some pork belly. It was awesome!
More progress on Rusty, one part at a time. I wanted to remove the u-joints so I could sand blast and paint the driveline.
To remove them, I used my favorite vice, something that’s been around longer than me. Using two different sized sockets (one to slide through and one to catch the u-joint as it slides through, I pressed it through. Make sure the grease nipple is NOT on the side you are pressing or it will cause you problems. This shows the u-joint after the springs are removed, but before I began pressing.
This CJ-3B body was built from brass by a company in India. The company shared the photos on Facebook.

Great photo.
“1945 PRESS PHOTO Army Jeep Coming Out Of Amphibious Water Buffalo Tractor 4494 Measures 7.5 X 9.5 inches”
Scramboleer Dan took the time to assemble these vintage newspapers ads for the Traveller (sorry it took me so long to get these posted!).

October 1, 1959, pg 15 of the Honolulu Star-Bulletin

Honolulu Star-Bulletin
A few years later we have some used Willys prices: