Here are several ads for GPW body parts on eBay from the same seller:
GPW (Ford MB) Research Archives
1945 GPW Payson, AZ **SOLD**
UPDATE: **SOLD** Was $800
This looks like it has an overdrive, so it might be worth a look.
“1945 Ford Jeep. $800.00 Needs restoration, rough but most parts. No motor, last set up for small block chevy. No top, steel top in photo is for CJ2 or CJ5 $350.00 with doors. Clean title.”
1945 GPW Aberdeen, WA $1000
UPDATE: Still Available
(09/02/2012) It’s a roller. Plenty of rust, but some value.
“Old flat fender. Not willys its a ford. rolls and steers, no engine,has trans. pretty complete, have title. has rust and bondo. 1000 bucks obo may trade. call 360 580 5764 thanks, josh”
1942 GPW Pottsville, PA **SOLD**
UPDATE: **SOLD** Was auctioned on eBay
” Ford Script GPW #7258 D.O.D. 3-20-42
Still has an original T-84 Ford transmission, Ford transfer case and parking brake assembly, I pressure washed the frame and it is in excellent condition. It is a Jeep Willys frame with a GPW serial number 7258, original leaf springs are still intact along with the original rears. The engine does not turn over by hand but is full of oil.
The body is in fair condition and is restorable in my opinion.
This GPW also comes with a Maryland title!!
If you are going to be an International bidder you are %100 responsible for the transportation and shipping of the vehicle.
I hope it gets into the right hands for a proper restoration any other questions just ask I will try and answer them to the best of my knowledge.”
1942 GPW Hyattsville, MD $1550
UPDATE: Pics provided. It’s a mix of parts.
“GPW 1942 Ford (Jeep). I used to drive this truck not too long ago maybe 2 years and then I just pretty much send it to a “storage” yard and my wheels got stolen. I just want to get some money for it. It only need wheels. It got everything stock. Call or text Carlos at: 240, four 17 ,Four 664. thanks. Cash please I got a Clean title in hand. Thanks.”
1944 GPW LIttle Falls, NY eBay
UPDATE: I got this confused with a 1942 GPW from Little Falls that was on eBay last week. My bad.
“For auction is a Willys jeep. This jeep started life as a CJ2A, but was totally redone about 6 years ago to be a WW2 MB. It has the MB2A complete body and grill. This was done over exactly like an MB. It has the Willys 4 cylinder engine, but does retain the T90 CJ transmission. It is currently set up with a 12 volt battery, but does have a 6 volt wiring harness so would be easy to convert back to 6 volt should you choose. Comes with the SCR-510 radio with antenna, and the gas operated .30 cal machine gun and mount. This gun does not fire real ammunition and cannot be made to fire ammunition. The ammo box in the bustle basket is for carrying the oxygen and propane to operate the gun. This is an older project so it is not in show room condition, but is a great jeep for a re-enactor or for driving in parades. It turns a lot of heads.”
View all the information on eBay
1944 GPW Tooele, UT **SOLD**
UPDATE: **SOLD** Was $1700.
What the heck happened to that grille? It looks like the headlights were pulled straight out! Tooele is pronounced ” Too ill’ uh”.
“Lots of parts will come with this. 1944 WW2 GPW made by Ford: Has title. Jeep runs and drives. Has a postwar engine and trans. Has the data plate on the glove box door. Has original axles front and rear. 4×4 works. Has rear seat. Someone modified the grill for large headlights. Driver seat and Windshield frame is for a CJ2A. This jeep has a lift kit. I will include a ww2 steering wheel, clean dash from a parts tub and 4 WW2 leaf packs if you choose to restore it. Asking $1700. More pictures available. Serious inquiries only. They don’t make any more of these. Willing to partial trade on a Bantam, WW2, or korean war era trailer. No texts please; my phone won’t support it. call or email, thanks”
1944 GPW Tooele, UT **SOLD**
UPDATE: **SOLD** Was $1800.
This is rough. The body seems like a GPW, yet lacks a glove box.
“This is a 1944 GPW WW2 jeep made by Ford. It’s OD green, neat with a straight tub and body work done. Has GPW WW2 engine (but it does not match the frame). I had this engine inspected by an expert restorer who said it’s a good block. Has GPW tcase. Missing trans and data plates. Has a post war rear axle but i know of someone selling one for a reasonable price. This one has a post war heater added but i will include part of a dash from my parts tub to replace the glove box area for free. Many free parts will come with this. No title. I bought this with a bill of sale. Wife says it has to go so no more restorations for me. But this is an excellent candidate for a quality restoration. Has some rust in the hat channels. Will provide some replacement hat channels free. Serious inquiries only please. Will consider partial trade for bantam, world war II or korean war era 1/4 ton trailer. No texts please; my phone won’t support it. call or email, thanks”
1942 GPW Cedar City, UT **SOLD**
UPDATE: This has a recondition tag. It looks to be a Moore Equipment tag:

Here’s an original Moore tag:

===========================
“1942 Jeep Ford Frame Willys Tub. Has a M38A1 Engine, cowling is cut near the hood, dash. has been cut for speaker, front seats are GPW, has a rebuild tab on the dash, very restorable but a mixed bag of parts..”
1942 GPW Barnesville, GA **SOLD**
UPDATE: Was on eBay. **SOLD**
A little duck tape and some bailing wire and this is good to go!
“I’m selling a ’42 GPW, GPW 23679 D.O.D. 4-29-42 I bought this one for parts for myself and now have no need for it. Figured I would list it here vs. taking it to the scrapper!
The frame is in good shape, the front horns are the best I have ever seen! just the Bubba bumper on the front and the civi attachment on the rear
The tub has rot on the left rear where the tail light hole and tool box floor would have been (I’m including a tool box section from another tub) floors need to be repaired/replaced- tool box lids are in good shape, but as mentioned before the tool box’s are themselves rotted….. the pioneer tool area is in good shape, some rot but repairable, dash was cut by previous owner to remove the guages but is included and can be stitch welded back in, glove box was also removed by PO and had the original tags on it ( will give you his contact info if you need it) this one was early enough to have a flat bottom on the glove box and could be easily fabricated. Driver seat is a small mouth gas tank seat but the seat back was modified with another frame, passenger seat is F marked but will need new swivel mounts/ feet. Fenders are in decent shape, support channels are not rotted out like you typically see but the do have there share of dents and bends in them.Hood is original to this jeep, is F marked and in decent shape, some rot on the support. Its missing the left axle shaft in the pics but I have a Willys one I will include, the front left hub is off in the pics as well but is included.”























