Parts Research Archives

To Top

CJ-2A Tub Salado, TX **Status Unknown**

• CATEGORIES: Body Parts, Parts This site contains affiliate links for which I may be compensated.

UPDATE: Status Unknown. Was $500.

The windshield has been sold.

“For Sale: Clean and complete CJ2A body tub. Not a lot of plastic, good solid tub worthy of metal work and your time.
Please voice call for an appointment to see it in person.
$500.00 CASH or CASH with trade(s) considered. Looking for clean, serial-numbered, functional, accurate, quality home protection devices.
The Jeep tub listed is located on our ranch between Salado and Holland, Texas 76571, about an hour South of Waco, TX.
*If you’re reading this add the tub you see pictured is still for sale. The split windshield frame has been sold.
**Please do not waste your time or mine calling me to ask if I will take less. I will accept trades, or trades with cash provided the trade value is in my favor.
***I have the capability to load you. Bring your trailer, donnage-bracing and straps. The jeep tub you see pictured will fit in the back of an 8′ pick up truck, but it will be difficult to unload. I would strongly recommend you bring a trailer.
Thank you”

cj2a-tub-salado-tx

[fb_button]
 
To Top

CJ-2A / CJ-5 Parts Hopkinton, RI

• CATEGORIES: CJ-2A, CJ-3A, Parts This site contains affiliate links for which I may be compensated.

UPDATE: The Chassis sold.

Tim’s got a variety of parts for sale.

For Sale:
1. A rolling Willys CJ2A chassis with L-head 4 cyl. (have not tried starting), needs alternator and starter, the rest of the motor looks pretty complete, springs very good, frame in good shape, rear crossmember in fair shape $600. Will include a CJ3A frame in very good shape for another $100. Bill of sales only, no reg. or titles available.
2. Miscellaneous Willys parts:
*brand new CJ3A grille
*NOS 24 volt military starter (M38/M38A1) still in the military can
*tailgate…no “Willys” stamp
*CJ5 grille
*dana 25 and dana 41 axles with springs
*starters, alternators, etc.
*air cleaners
*extra L-head motors (2)
*carbs
*M38 windshield with glass (side of windshield needs a little work, but certainly salvageable), also M38 hood (fair condition)
This is a partial list. Call and make an appointment to see any parts, I just might have what you need for your Willy’s jeep project! Pricing very fair.

 

[fb_button]
 
To Top

Koenig Model 525 Hardtop for a CJ-5 Ankeny, IA **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** was $400.

Jacob’s got this hardtop for sale.

“Vintage Koenig haalf top – sought after piece! All there just needs some glass replaced. Bought for a project and am going another direction. Fits early CJ-5.”

koenig-525-hardtop-ia3 koenig-525-hardtop-ia4

[fb_button]
 
To Top

4 Wagon? Hubcaps Fallbrook, CA **SOLD**

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $80.

I believe these were used on the wagons.

“Little worse for wear, but are rare and can easily be refurbished and would make a great addition to any restoration project, $25 each or $80 for the set”

hubcaps-sd-ca

[fb_button]
 
To Top

Free CJ-2A/3A Frames Spokane, WA

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

Three free frames. Also, seller has body for sale for $100.

https://spokane.craigslist.org/pts/d/willys-cj2a-cj3a-jeep-frames/6637103339.html

frames

“None of these frames have an associated title, and they will need work.

1947 CJ2A Frame – Coated in red frame primer. The front horns are pretty rough, bubba welding around the crosstube and around added pieces, but nothing a competent welder cant fix. Looks like it had a plow put on it at some point. Rear half is fairly solid with the stock draw bar and bumper.

1946 CJ2A Frame – Black paint. Ok shape with a decent custom front bumper and winchplate. A few repairs and cuts. Notably around the front springs rear pivot (pictured).

CJ3A Frame – Under the grey body (which is also for sale – $100). Great frame aside from a single bad patch of rust about 10 inches long just behind the front spring pivot. It was stored on its side up against a guys barn so it pooled water in that one spot. Otherwise its solid with little rust and no damage or repairs. The front bumper had been replaced by a welded-in tube then the center was cut out.

Half frame – Someone took a torch to this one and the front springs. It has a nice draw-bar on it.”

[fb_button]
 
To Top

T3-C Trailer & Plow Glenburn, ME **SOLD**

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $450 total.

The Trailer is $250 and the plow is $200.

bantam-t3c-trailer-me2“6′ Scheneker Iron Works Plow with Monarch HY-LO Pump. Pump includes generator mounting bracket and control rod. Plow was used on a CJ-3A but will fit other models. Everything worked when it was removed. $200.

bantam-t3c-trailer-me
Bantam T3-C Trailer. Data plate is missing so exact year unknown but there were pretty much all made in the late ’40’s. Tub is rough but the rest is a great candidate for restoration or expedition trailer build. Original and rare Fulton coupler intact as is the original landing leg and one safety chain. I believe the Firestone tires could also be original. $250.”

[fb_button]
 
To Top

1963 Engine/Tranny/TC/PTO Leavenworth, KS $700

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

May be of interest to someone?

https://kansascity.craigslist.org/pts/d/1963-jeep-willys-flat-head/6629957437.html

1963-fc170-drivetrain-kc

“We have a motor and transmission out of a 1963 Jeep FC 170. It is the flat head 6cyl. motor it ran when we pulled it out. the
Transmission is a three speed manual with the PTO take off and has the transfer case for four-wheel-drive

Jeep did drive when we got it
We are asking $700 or best offer
the last picures is of the jeep they came out of
jeep is not for sale”

[fb_button]
 
To Top

CJ-2A Axles & Husky Hubs Inyokern, CA $200

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: I thought these might me a normal Allstate hub (as they are branded Allstate), but these might more likely be some Allstate branded variant of a Husky hub. 
http://www.ewillys.com/2014/12/13/husky-hubs-for-sale/

I wonder which Willys Equipment piece was loaded on the back of this CJ-2A?

https://www.facebook.com/marketplace/item/171586296834310

“Selling axles from a Jeep cj2a. Price is each. If you know anything about these, feel free to contact me as I don’t know anything about these. Located in Inyokern”

cj2a-axles-allstate-hubs1 cj2a-axles-allstate-hubs2 cj2a-axles-allstate-hubs3

[fb_button]
 
To Top

Various MB/GPW Parts Raleigh, NC **SOLD**

• CATEGORIES: GPW (Ford MB), MB, Parts This site contains affiliate links for which I may be compensated.

UPDATE: Looks like these parts sold.

“I have many different items from 3 WWII Willys Army Jeeps. Items have the original stamps and other VIN numbers.
I have old pistons, grill, tailgate, wheels, gauges, etc.

Many parts are in mint condition and still usable! I’ll put “Excellent” as a condition even though it’s from one end of the spectrum to the other, just depending on what suits you”

parts-raleigh-nc

[fb_button]