emailNeed to contact me and don't have my email? Click on email button.
About eWillys
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
I needed to set one up to host a few videos for the site, but after I got done setting it up I don’t think they were for posting just for me to see, so either way check this one out.
Not much left, fairly rough, it is 2WD I-beam, column shift. Hood inside looks later, kind of a salad, I think this is a if you are around the corner might be a few bits worth it here but the rest is going just take up room. Not the first time I have been wrong.
Information from seller:
Complete body Needs rear floor and lower quarters No glass DANA 44 front end / DANA 60 rear come with it No title No motor Bought as is and have too many other projects and expenses. Or best offer
Might be a good start to a project. Don’t think you can make much on the parts at this price so might want a vision for this one, that’s just my opinion never know its worth what folks are willing to pay. There is a lot here, just a lot of work to part stuff out at times for profit. It’s really solid so for folks on the East Coast there is a lot of value here for a project.
Information from seller:
1949 Jeep Wagoneer · Wagon · Driven 9,999 miles Willys Wagon. Extremely solid, nearly rust free body. Rolling chasis, no drive train. Drivers floorboard has a patch panel. Originally from Wyoming, has been stored under cover. A great starting point for your project! See all photos.
Willys Jeep Station Wagon Rear Upper Tailgate $600Ludlow, MA
Couple years back saw an really nice one for $400, if this is legit might be a good score. Better not let the wife see this on the Ruggable carpet! Brave seller. Also just says “Listed” not sure when, so no clue on availability of this one.
Information from seller:
1947-1960 Willys station wagon upper rear window tailgate. NOS – never been mounted, installed or painted. Has upper hinge & interior latch mechanism. Has #674298 written in it (not sure if old part #). White spot on outside right side is an old sticker. $600 Pickup in Western Mass. Will ship from Massachusetts but buyer pays shipping cost.
Well a few F134 posted up, this looks like a good option as well. You probably can fit 2- F134 in the truck!
Information from seller:
Up for sale: 1956 Willys F134 engine. It will come complete from flywheel to water pump and exhaust manifold to plow pump. It does run off of a remote tank of gas. Still installed in truck. Looking to get $500 for the setup. Located in Granby, CT
I would toss this on the truck if I was near by. I have an F134 but it is an industrial and was a pump of some sorts, which is nice because it has like a built in run stand, so that’s all set don’t need to build that part. But a running F134 from a Wagon or CJ would be better suited, who knows.
Information from seller:
4cyl jeep engine i believe its for a 50s Willys Wagon
Posting year as posted, probably earlier then ’63. Same reasons as the other rig from today, but never know. Needs work.
Information from seller:
Swapped sbc motor, hasn’t been started in awhile, but when last started ran good. Will need to be gone over, but was a running/driving vehicle. Obvious rust on body, look at pictures. Many additional parts go with truck, extra grill, body panels, etc. Looking for a fast sale and 4k obo. Clean title. Will need to be towed
I’m going to toss this up as a 1953 Wagon, listed as a 1940, definitely not that. Could be a bit of a salad as well here.
I truly forget when they came out with the 4×6 rear bumper, have to look that up.
Check out that cool Trailer in the back ground, the front top is just awesome looking.
There is a bunch of stuff in this one never know what’s in there till you go take a look. Weeds are dying out this time of year, no snow yet, so you have a limited window till it gets too cold and snowy to go see these.
Information from seller:
Everything’s there motor we’re in frame everything and really good shape for as old as it is as is no title
Willys Jeep Engines and Transmissions $VARIOUS Athens, TN
230 Looks like a Wagon/Truck, showing a decent exhaust manifold, 2BBL Holley 2415 should be on there from what it looks like. It’s been detailed at some point in its life, would need some more numbers to dial in what year and the sort, which we can help with if someone wanted this one. I have 12, so I’m good at the moment, I will say the most I think I ever paid was right around the $800 mark and I overpaid for that one it happens. But this is showing a T90/D18 on the back (I think they want to sell this separate), if they separate it hopefully they do just pull the T90 combo and leave the Bellhousing (Same as a 226) if they remove the Bellhousing (which is so much work for no value there IMO) make sure to snag the Flywheel here they are unique to the 230, and the bolts are special as well that hold these on, but you really can’t take those out, I would not cut them ever take the time to properly remove the Flywheel its pretty straight forward once you have done one, just be careful in general so its not flying at you.
Couple other parts and pieces as well.
This is it for today, I’m already running late and its only 4:10am!
Information from seller:
I have 1- 230 inline 6 tornado jeep motor it dose turn over freely. $600
I have 2- t90 transmission $400 each
I have 2 tcase $250 each
I have 2- 4 cylinder motors 1 was taken apart for a rebuild an didn’t get to it $150 the other is unknown condition but complete$150