Paul took advantage of a warm Anchorage day and took this shot showing the reflection of his engine on the hood.
1957 FC-150 Arcadia, CA **SOLD**
UPDATE: **SOLD** Was $14,000
Damon’s got this nice looking FC-150 for sale.
“1957 All Original Rare Jeep Forward Control FC-150, narrow track
4×4, 3-Speed, 4 cylinder “Hurricane” F-head 134 cube engine. Willys Serial #10,636. Built in ’56 which makes this the 635th one off the line. Just under 10k original miles, runs and drives very well. All original drivetrain and engine. This is a Jeep with no overdrive and a top out speed of about 48 mph. Paint is 9 years old, but still shines. Has the original spare tire attached.
This has always been a southern CA truck, and I am the third owner.”
1955 CJ-3B Crowley, TX $11,500
UPDATE: Price dropped to $11,500.
(05/28/2018) The body has had some work.
https://dallas.craigslist.org/ftw/cto/d/1955-willys-cj3b/6600770421.html
“Completely rebuilt 1955 CJ3B Sandblasted. Primed, painted. New floors New hat channels, new sheet metal wherever needed. ZERO rust is left on this jeep. Transmission completely overhauled, transfer case completely overhauled, axles completely overhauled. New bearings, brakes, seals, gaskets, leaf springs, exhaust, seat pans, and covers, cables, wiring, etc.. Single stage paint. Currently 12 volt and I do have all 6 volt stuff also. I have pictures of all sandblasting, receipts for everything else. No need to sell but I may be ready for something else. No trades. Cash only.”
1962 CJ-3B Batesville, TX **Status Unknown**
UPDATE: Status Unknown. Was $15,000.
(04/06/2018) Looks like it needs a few things (rear lights for example), but looks good.
“1962 Jeep CJ3B completely restored with brand new body, frame sand blasted, epoxy primed and painted. Body painted with base coat, clear coat, ( Mallard Green ). Engine bored, new pistons, new valves and crank shaft turned. All new seals and bearings installed in all components.”
1964 FJ-6 Visalia, CA **SOLD**
UPDATE: **SOLD** Was $5000.
Bumpers and wheels/rims aren’t original.
“1964 jeep willy fj 6 fleetvan ice cream truck every thing is original only I changed regular to alternator”
1942 GPW Tucson, AZ $19,500
“This one has some odd holes in the dash and floor, some filled with rivets(?). It has a 2A windshield. The front frame rails and bumper have been modified, too.
https://tucson.craigslist.org/cto/d/1942-jeep-willys-mb-ford-gpw/6581070136.html
“Amazingly beautiful. fully restored from chassis up. original motor/chassis/tub and almost everything else. turns on like a light switch. WWII Jeep. 4×4. clean title.”

1950 & 1952 CJ-3As Richland, WA $3500
These aren’t far from me.
https://kpr.craigslist.org/cto/d/1950-and-1952-willys-jeeps/6607195186.html
“Selling 2 jeeps time and money constraints jeeps gotta go.
1. 1950 willys cj3a (red)
134 f head 4 cyl , almost 100% stock minus a 1″ lift, gm 1 wire 12 volt conversion. 5.38 gears front and rear, rebuilt braking system, new tires runs drives and stops gas a title and classic car tabs. The jeep is rough and has rust.
2. 1952 wilkys cj3a (brown)
134 f head 4cyl runs, doesnt drive needs brake work and a few other things. This jeep was bought for its tub and miscellaneous parts. Bought from a junk yard so it has no title only a bill of sale from the junkyard. ”
1946 CJ-2A Porterville, CA No Price
I’m not seeing “too much to list” here. Looks like it’s fairly stock, though it does probably have an f-head.
https://visalia.craigslist.org/cto/d/1946-willys-jeep/6613422281.html
“1946 Willys Jeep too much to list”
1953 CJ-3A East Bay, CA $3800
It’s a project.
https://sfbay.craigslist.org/eby/cto/d/1953-willys-jeep/6608592957.html
“Clean title, 53 Willys jeep. Is a project, but has a newly rebuilt Willys 6cyl Super hurricane. A newly rebuilt tranny and transfer case. Is a very doable project, and has a lot of parts. Asking 3800 or best offer.”
CJ-3A/3B Replacement Wheel Wells Bonney Lake, WA **SOLD**
UPDATE: **SOLD** Was $100.
Looks like a good price.
“Brand new replacement rear wheel wells for a CJ3A or a CJ3b.
Could also be made to work for other CJS with some work.”
CJ-3A Parts – Oneida Half Cab(?) Airway Heights, WA
UPDATE: **SOLD**
The half-top show below (which is in poor shape) has an Oneida Military Contract Data plate (here’s a second Oneida hardtop). Anyone familiar with that company vis-a-vis jeep tops? Most interesting, it has a manufacture date of 1951, which means it could very well have been original to the CJ-3A, meaning the 3A (not that there is much left of it) could have been a military 3A.
“3a parts for sale. Windshield frame $300.00 Original seats passenger and driver $200.00 ea. $350 for the pair. Tail gate $100 pretty rough but would make a great decoration. Grill $300.00. 2 cj3a tubs for sale as well $200.00 ea or $300.00 for the pair. Rare half cab. Looks to be in good condition. Needs new glass $1000.00. Also have misc cj2a parts available.”
1943 MB? Tucson, AZ $2800
No pics provided.
https://tucson.craigslist.org/cto/d/1943-willys-jeep-flat-fender/6612951805.html
“I have a 1943 Willy’s jeep flat fender. This has a chevy conversion, I has a 327. The only reason I am selling this is I don’t have time to work on it. It does come with a tow bar and heavy duty winch on the front. When we picked this up it was a ranch jeep and had carpet in it. We took the seats and carpet out. I was going to redo the center console metal work. I have two sets of seats that will come with the jeep and I am also have the back seat that was in it. I can put this on my trailer and deliver if needed for a fee depending on distance.”
























