Monthly Archives: January 2010

To Top

Bantam BRC-40 Columbus, Oh eBay

• CATEGORIES: Bantam-FordGP-WillysMA-EarlyJPs, Unusual This site contains affiliate links for which I may be compensated.

Thanks to Jim sending the link on this.  Obviously, this is a rare event.

“1941 Bantam Reconnaissance Car (BRC-40).  Restored – starts, run, drives great.  The vehicle was originally purchased  and restored by a pretty well known figure in the Bantam Auto Club circle sometime in the late 80’s/early 90’s.  I have a one page letter from this person detailing his efforts to obtain and restore the vehicle (which I will give to the buyer).   It passed through a few owners until my purchase in 2001.  Over the years I have upgraded/corrected various pieces and parts.  It comes with a few spare parts, manuals, and a top.

The vehicle is 99%+ complete and accurate.  The body tub is original – ie. not a reproduction like many others out there.  The items that I believe are incorrect (or missing) are:

The choke and throttle knobs are the not the early “bulls-eye” type – although I have what I believe to be one correct replacement.

The oil pan does not have a skid plate – although I have a correct, original oil pan with skid plate that needs to be cleaned up and attached.

The rear tool box lid locks are incorrect.

The reflectors are of the King-Bee type (as used on the FORD GP) and I believe should in fact be Triflex SR-71s.

When I purchased the vehicle, it had a reproduction windshield frame.  It was a pretty accurate copy, but a reproduction nonetheless.  I sold it to another BRC-40 owner and acquired an original frame a few years back.  It needs some work (arms straightened, etc and needs the latches to the cowl when in its upright position), but it’s in pretty nice condition.  In fact, it has most of its original paint.

The front bumper is an OK reproduction, but I acquired a much better replacement from Ken Hake which has the correct rivets and hand crank guide.

Lastly, in the spirit of full disclosure, I am not sure the front leaf springs are correct/original.  They may be correct, but again, I am not 100% sure. Lastly she needs a good bath – she has sat in my barn with my other vehicles for the past nine years and has collected a coating of dust and dirt.  It was near freezing when I took the photos – I put a new battery in her and she started right up.  Lastly, after sitting for nearly nine years, the brakes are a bit mushy.  I’ll see if I can rectify this prior to sale (no promises).”

View some of the pics on eBay or many pics here.

bantam_brc40_34

bantam_brc40_35

bantam_brc40_38

bantam_brc40_25

bantam_brc40_36

 
To Top

1951 M-38 Larkspur, Co **SOLD**

• CATEGORIES: M-38 This site contains affiliate links for which I may be compensated.

1951_m38_larkspur1UPDATE:**SOLD** Was $5,500.

(05/25/09) This is a great looking M-38.  Lots of nice, simple details.

“This one of a kind M38 is a must see. Hours have been spent creating this fun yet functional ride. This is a 1951 Willy’s M38 Flat Fender (Korean War Era) that has been fully restored to street driveable. Engine: V6 Buick 235ci (1977 Olds Starfire). Chrome Edelbrock valve covers,
Suspension: Dana 25 Front , Dana 44 Rear with what I belive are the original leaf springs. Both differential covers have been replaced with chrome covers and the front diff has a powder coated half Spider rock guard (from Purple Cranium). Rancho 5000 shocks have replaced the original shocks. Transmission: 3 Speed T90 with a Dana 18 transfer case. Steering: Saginaw.”

 

1951_m38_larkspur2

 
To Top

One more Double Ender

• CATEGORIES: Unusual • TAGS: This site contains affiliate links for which I may be compensated.

Here’s a VW Bus DoubleEnder posted at Flickr.

double_ender_vw

Here’s an earlier post about double enders.

 
To Top

1954 CJ-3B Tucson, Az $3250

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

That’s one tall roll bar.

“rebuilt motor , driveline, suspension, brakes; works excellent; garaged; rust free uncut; original; low mileage; needs paint; e-mail or call and leave a message 520-219-0994.”

http://tucson.craigslist.org/cto/1535557831.html

1954_cj3b_tucson3

 
To Top

1962 Wagon Indianapolis, In $1700

• CATEGORIES: Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

I don’t see too much rust on this.  It might be a good price.

“Willys Wagon four wheel drive. All original, 67K miles, interior complete and in good shape, dash not chopped up, 226-6 flat head runs good, just changed oil and replaced fuel pump. 4WD , twin stick transfer case works good, lock outs work good. Body is in okay shape, has “Willys Rust” . Extra complete motor and misc. parts, service manual included. Good clear title. I bought it as a project earlier this year and started to work out the bugs. Got it running and driving pretty good just needs a little more TLC. Enthusiasts preferred, I want to see the Willys go to someone who can keep it alive.”

http://indianapolis.craigslist.org/cto/1535567804.html

1962_wagon_indianapolis

 
To Top

1947 Truck (4wd) Jamestown, RI **SOLD**

• CATEGORIES: Willys Trucks • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Well, Steve couldn’t stand the thought of someone not restoring this truck, so he bought it and has offered to provide updates to ewillys readers as he restores it.  Best of luck Steve!

A reader named Steve examined this Truck today.  It’s got a Dump O Matic Hydraulic Dump Bed. Steve felt this was more work than he was looking for, but thought it would be great ‘for the right Willys Addict’. Thanks Steve!

Steve reports, “This was the first year for the pickup with only 2,346 4WD models built. The bed has a fair amount of body rot, but could be repaired or replaced.  The cab is original and mostly complete.  It’s not dented or molested.  The engine is seized (but included to keep matching numbers) and the seat bottom and headliner are missing.  A replacement engine is included that came from a military generator that was religiously maintained and ran on propane.  The tires are dry rotted, but the frame looks good.”

Here’s the Craigslist AD:

“1947 Jeep pick-up. 4 wheel drive. Dump O Matic pick up bed. Truck is in fair condition for an unrestored truck of this age. This is a restoration project.There is rust but cab and floor are in good condition.Truck has 42000 miles. Last time on road was 1987. For more information call David at 401-465-9490”

http://providence.craigslist.org/cto/1533727941.html

1947_truck_jamestown

 
To Top

1946 VEC CJ-2A Palos Verdes, Ca **SOLD**

• CATEGORIES: CJ-2A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $10,000.

(11/04/2010)

“First of all please note my stellar feedback so you can bid with confidence. I expect the buyer to be the same. Out of my collection is this very original 1946 CJ-2A Willys with matching civilian 1946 TC-3B Bantam trailer. This Willys is a frame off restoration. It is refinished in the original and correct color of Harvest Green. It has the correct original running gear: 134-L Go Devil engine, T-90 trans and Dana 18 transfer case. This Willys would do well in any show and is turn key ready. Best of all, you can drive it anywhere.  The reserve is set MUCH less than comparable vehicles on the market and this INCLUDES the Bantam trailer. Odometer shows 47,290. I don’t know if this is actual or not. The following are all new or professionally rebuilt. Look at the pic’s…”

 
To Top

How about this Camper?

• CATEGORIES: Camping, Features This site contains affiliate links for which I may be compensated.

From the ATVRider website:

Offroadcamperpopup31

Offroadcamperpopup11

Offroadcamperpopup21

 
To Top

The Ensign 100

• CATEGORIES: Unusual • TAGS: This site contains affiliate links for which I may be compensated.

Here’s an interesting, rare offroad vehicle built specifically for Mining.  I first discovered it at Hemmings and then ran across a detailed story about it at OEMOffHighway.com.  I couldn’t find any more pics or information about them.

From OEMOffHighway.com, “The Ensign 100 was rated at 1.5 tons and was built around a frame made from 2x4x0.25 in. steel tubing, on to which a body fabricated from 1/4, 3/16 and 1/8 in. plate steel was welded. The standard power plant was Ford’s 52 hp, four-cylinder 192D diesel industrial engine, although Deutz or Perkins could also be ordered.”

From AVRider

DSC01687

From Hemmings:

ensign_100_1

ensign_100_3

ensign_100_2

ensign_100_4

From the OEMOffHighway.com:

ensign_brochure

 
To Top

PTO Shasta Lake, Ca

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

James has this PTO for sale if anyone’s interested.

pto10

pto1fin

repaintsm