Yearly Archives: 2016

To Top

Bed Extension Arvada, CO **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $300.

Looks solid in the pics.

“I have for sale a vintage jeep Willys bed extension box. This box is in great condition for its age! The tailgate is on it backwards, but can be switched around. Dimensions of this box are: 39 inches wide, 16 inches deep, 28 inches long! Brackets are included for attaching to a Willys Jeep. This is still usable as it’s original intended purpose, or could be repurposed into 1 million different things! ”

bed-extender-arvada-co1 bed-extender-arvada-co2

[fb_button]
 
To Top

Koenig Hardtop Bonney Lake, WA **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $300.

The top needs a few glass panes.

“Koenig model 550 hardtop with full roll up windows and rear slider windows.
Steel in really good shape with no rust.
Needs seveal pieces of glass.”

koenig-550-hardtop-bonneylake-wa

[fb_button]
 
To Top

Year? DJ-3A Albuquerque, NM **SOLD**

• CATEGORIES: DJ-3A, Fire/Police/Industry Vehicles • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1200.

Colin did some due diligence and determined that this is likely a former airport baggage conveyor DJ. Here’s a very similar conveyor DJ from the 3B page.

Here’s what Colin deduced: The mounts on the front frame rails are in a position where the front conveyor supports can be mounted.

The rear platform for the conveyor is attached to the rear corner of the tub on those DJ3As and on the sides of the CJ3B as well (see the CJ-3B page).  It would preclude the rear taillights, and  rear fuel filler that is standard on the DJ3A, but one photo of the DJ3A with the North Central Convair 500 shows the fuel fill tube low on the right rear corner, and the rear wheel opening is modified just like the one on 20796 (See the CJ-3B page for pics side and rearish

Also, the right rear corner of the tub is modified to clear the conveyor.I suspect the large holes in the rear panels helped support the bracing for the rear platform and also carried the hydraulic lines and controls for on the ground operation.  The Line lock was for the brakes and the chrome handle on the left side of the dash were no doubt for the governor.  The emergency brake T- handle was moved to a location where the driver could set it, otherwise it would have been under the conveyor apparatus.

“1950’s model DJ3A Military Willys Jeep DJ3A. Body in great shape, nearly rust free, have engine and transmission, 2 windshields, most of the major parts are there. Needs restoration or used for parts. Too many projects already so decided to move on.”

http://albuquerque.craigslist.org/cto/5840425407.html

year-dj3a-albu-nm5 year-dj3a-albu-nm4

year-dj3a-albu-nm1 year-dj3a-albu-nm2 year-dj3a-albu-nm3

[fb_button]
 
To Top

1950 Wagon Glenshaw, PA $5900

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5900.

Might be a good price.

“1950 Willys…. Good running condition.. New Clutch , Alternator and water pump. Very solid body. ready to restore..$5900…..For more info or to set up an appointment to see, ”

1950-wagon-glenshaw-pa1 1950-wagon-glenshaw-pa2 1950-wagon-glenshaw-pa3 1950-wagon-glenshaw-pa4

[fb_button]
 
To Top

1946 CJ-2A & Drag Jeep Phoenix, AZ

• CATEGORIES: CJ-2A, Racing • TAGS: This site contains affiliate links for which I may be compensated.

Seller also has a modified ’87 CJ-7 for sale as well. He’s selling all three together for $10,000.

“46 cj2a 200ci ford I-6 with turbo–needs head put back on and and MSD 6AL box, 3 spd trans, twin stick t-case, D44 rear end, D20 front end. 4″ YJ springs sprung under right now, but tabbed for sprung over as well. full cage welded into frame. Clean VIN and title in hand—$4k obo

Custom built sand drag Jeep with 46 willy’s grill. Rolling chassis with 9″ Ford rear end, all Mark Williams inside with spool ($3k in parts in rear end alone) comes with Wilwood calipers. Tabbed for BBC and TH400 trans. $2k obo. 510BBC nitrous long block and TH400 available as well for additional $$$

87 CJ7 4.2L I-6 with Holley EFI conversion, electric fan, 5spd trans with hand throttle, twin stick t-case, 9″ Ford rear end (needs ring and pinion replaced) D44 front end manual hubs. . .both locked, not sure of ratio but I know they are low. Rear triangulated with Fox coilovers, front sprung over. 39.5×15.50 Boggers, bucket seats, full cage from front to back welded into frame, cooler rack, fuel cell in back. No title, but bill of sale will be notorized, clean VIN. $7kobo

Take all 3 for $10k…NEED $$ FOR DIVORCE!!!!”

http://phoenix.craigslist.org/wvl/cto/5880664185.html

1946-cj2a-sandjeep-phoenix-az1 1946-cj2a-sandjeep-phoenix-az2

[fb_button]
 
To Top

1942 GPW Santa Rosa, CA **SOLD**

• CATEGORIES: GPW (Ford MB) • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:**SOLD** Was $15,699

(10/23/2016) Looks good. Has been converted to 12 Volt.

“1942 Ford GPW. I have a clear title. New tires, new canvas top and seats. Rebuilt carburetor. 5 combat rims. Original riveted brass data plates – numbers match the frame. This was a running jeep that was cleaned, repaired as necessary, painted, and returned to the original condition when obtained. It has been converted to 12 volts. with an alternator. It is believed that all the parts are original except for the front bumper and horn (try to find a Sparton horn at a decent price!) and of course, the alternator. There are a lot of Ford marked parts – it is assumed that those who did repairs and replacements did not worry about using Ford marked parts in the past.”

1942-gpw-ssantarosa-ca-01 1942-gpw-ssantarosa-ca-02 1942-gpw-ssantarosa-ca-03 1942-gpw-ssantarosa-ca-04

[fb_button]
 
To Top

1947 CJ-2A Fort Worth, TX $3500

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $3500.

(10/20/2016) Runs, but windshield needs some work.

“’47 Willys for sale. Runs great! Hard top, rear window and doors are included but doors and rear window are not currently on it (see pics). Driver’s door has a manufacturers tag from Willys though I’m not sure who actually made it – I’m told Grumman made them during the war and for a little while after, but I haven’t researched it too much. Tires have been “slimed”. The windshield seems solid (even though it has a crack) but the frame supporting it does show considerable deterioration – needs to be replaced, I just haven’t had time. No title. Great hunting or ranch vehicle.”

http://dallas.craigslist.org/ftw/cto/5834131295.html

1947-cj2a-benbrook-tx1 1947-cj2a-benbrook-tx2 1947-cj2a-benbrook-tx3 1947-cj2a-benbrook-tx4

[fb_button]