No pics provided.
“Some Willys, Jeeps & Many PARTS, Call ED @ 4026895105 ,Thanks”
No pics provided.
“Some Willys, Jeeps & Many PARTS, Call ED @ 4026895105 ,Thanks”
UPDATE: **SOLD** Was $9500.
One truck runs and the other two need a little work.
“3 Willys pickups and 1 rolling chassis……….$9500.00 for all….Or????
1950 Bone stock with fresh F 134 engine and T 90 transmission, professionally rebuilt. Timken rear end and 8000# Koenig wench. 31×10.50 tires with 90% tread. Good interior, good body. Needs starter. Current license and title in hand.
1951 Good body and interior. Lifted. All Chevy 3/4 ton suspension and running gear. Chevy 350 engine and rebuilt TH350 transmission. 35″ Dunlap mudders, 40% tread. Runs strong. Current license and title in hand.
1955 Small block Chevy and T90 transmission. Does not run. bad rust in bed. frame, body and fenders in good condition. Ramsey 8000# wench. Bill of sale.
1952 straight rolling chassis with excellent Cooper tires.”
This looks nice.
“I have a very nice 1953 Willys truck, it was a pickup but converted to a flatbed, original 134 four cylinder F head, dual range 4WD, three speed, all original, 12 Volt conversion (new rebuilt alternator last fall), Michigan title in my name, it has been converted to a flat bed with the bed from a 1936 Ford, finished wood oak deck and side rails,very good deep lug tires, RUNS VERY WELL, great “Cruise Night” vehicle or old car show item. These Willys pickups in good running condition are getting extremely difficult to find, they are almost non-existant (check on Craigs List)………
I dont need the money, this truck is only a toy for me…….but I would be willing to trade for a comparable condition Harley WL, FL type springer, Bad Boy, FXST, a Duece Coupe type, T-bucket hot rod, antique auto, ratrod, rat rod, hot rod, replica auto (very minor repairs ok), would even consider a trade for a Corvette………sorry, I am retired and have no interest or time for a project vehicle, just looking for something else. I would place the value at about $8k. Email with any offers, dont be afraid, all I can say is “No”, just looking for a new toy, additional info on request. Please…………..no tire kickers, old car freaks or photographers.”
UPDATE: **SOLD** Was $900.
There might be some value here.
“57 willys cj5,327 chevy motor,d-18 transfercase,t-90 tranny,all the right adapters,hard top,body rusted on floor,frame good except rear cross member,firm on price,was in barn,hasnt been on road since 78,hasnt ran in 8 years,”
This looks nice.
“1960 Willys 4wd Pick Up.
327 V-8
3 Speed
Dual Exhaust
New Tires
Runs Strong
Super Clean
Call 419-779-2852 Ask for Orville for more Info.”
I didn’t know that used the L-heads as late as 1965 on a generator.
“1965 FRAIZER WRIGHT COMPANY GENERATOR
JEEP WILLYS 4 cylinder engine
Willys engine is probably worth more than the whole unit
runs super smooth
really neat
low hours 42 on meter
side panel w/ many gauges
122/240 Volt
3 phase plug
Small trailer w/ 2″ ball
$2400
Call Eric anytime @ 554-8148”
UPDATE: Was $5250. **SOLD**
(03/29/2011) Lots of stock jeep here. It looks like the bow holders are missing.
“I have a real nice little willys jeep i rebuilt the tottal running gear bumper to bumper with all american parts it runs,drives,looks great to be 63 yr.old not all rusted out or banged up, all the numbers such as frame,engine,trans,front & rear diff.all match not many can say this,the 4 wheel drive pulls w/all 4’s when locked in, has a 4 cly.3 speed new steering also this, is a fun little jeep to drive & have fun with i’m asking $5250.00.”
UPDATE: See the newest CJ-6 here.
James and Tish run Red River Offroad Tours out of Taos and Red River, New Mexico. One of their vehicles is the refurbished 1975 CJ-6 shown below.
James writes, “The 1975 CJ6 was used by the US forest service in Colorado. It has a rebuilt stock motor and transmission. The suspension was modified with a 4′ lift kit and Cooper STT 33×12.50-15 on 8″wheels with a Disk brake conversion on the front. A couple custom built bench seats above the wheel wells in the back have been added for visitors. It also has a Custom built shade/rain canopy.
We do on and off-road Jeep tours in the mountains of Northern New Mexico. Taos and Red River,NM reaching elevations of 12,689. May thru the end of October. 7 days a week. www.redriveroffroad.com”
So Check out the website to learn more. Check out their photo album. That’s a cool effect. http://www.redriveroffroad.com/album/index.html
After restoration and modifications:
HOG spotted this clean looking CJ-2A.
“Really Clean. It has the Original Flathead in it, redone of course.”
http://www.marylandjeepclub.org/forum/viewtopic.php?f=12&t=22471
Here’s a 4×4 event in Nevada, Iowa. They would especially love to get some FC owners to attend, but it looks like a variety of 4wd vehicles will be there.
The 2011 IOWA ALL BREEDS JEEP SHOW & 4X4 SWAPMEET will be held sept 24-25 at the Story County Fairgrounds in Nevada, Iowa 50201. We will be on site all day friday sept. 23 for setup and early registration.The show goes from 8am to 5pm ish each day . We expect several different 4×4 and jeep clubs to be present and including scouts , land cruisers , broncos , land rovers , jeeps , willies , kiasers , buggies , and a wide range of military vehicles . Some of the show highlights include – 800′ off road driving course.
– Slow crawl contest
– Kids power wheels course
– RTI Ramp
– Blackhawk helicopter landing sat. morning
– Old and new military vehicles on display
– The Bantam Balancer ( teeter totter )
– Swapmeet
– Winching contest ( timed vehicle righting event )
– Door prizes and drawings
– Vehicle show and shine
– Rock climbing wall
– New Equipment vendors
– Jeep trailer judging new or homebilt
– Jeep and 4×4 inventions contest
$5.00 admission , $10.00 vehicle in show and shine only , $20.00 vehicle in all games and challenges all weekend including show and shine. Swapmeet booth 10’x10′ is $25.00 for the weekend ( most have 110 electicity ) , Business vedor booth 10’x10′ is $100.00 for the weekend , Free booths for 4×4 and jeep clubs. Note; The usual safety equipment and insurance required for vehicles on cours and challenges .
SCHEDULE OF EVENTS
SATURDAY SEPT 25 , 2011 7am – 11am vehicle registration open
8am – 5pm vendors and swapmeet open for business
9am – – – on tech inspect available
10am – 11am obstacle course demonstrations
11am – 12pm course open to vendors ONLY
11am – 1pm vehicle judging , trailer and inventions judging
1pm – 5pm obstacle course open to all inspected vehicles
1pm – 4pm RTI RAMP and BANTAM BALANCER competition
1pm – 4pm slow crawl competition
SUNDAY SEPT 26 , 2011
8am – 11am 1st place winners staged
8am – 3pm obstacle course open
8am – 3pm vendors and swapmeet open
8am – 10am RTI RAMO and BANTAM BALANCER
open10am – 12pm roll over contest
3pm – 4pm awards ceremony & drawing for more info call 1-515-708-0080