Parts Research Archives

To Top

Jeep Parts Auburn, Ca

October 9, 2009 • CATEGORIES: OD Borg Warner/Rancho, Parts This site contains affiliate links for which I may be compensated.
0

Note the SM420 + adapter +TC +overdrive (studebaker) for only $600.

“Stuff that needs a new home:

  • Chevy bell housing with SM-420, dana 18, adapter and Borg Warner(studebaker type) Overdrive-  Take it all for $600 obo
  • Borg Warner Overdrive for model 18 T/c High gear only. $300
  • Miscellaneous Jeep springs, mostly narrow for spring repair/replacements.$10 a spring
  • Buick V-6 all rebuilt, with edelbrock intake or stock intake and 2bbl carb. $1050
  • Turbo 350 trans and torque converter, fits above buick v-6. $200
  • Chevy/jeep fenderwell headers for SBC in Cj-5 $125
  • Amc Jeep 304 headers and mufflers, rusted but work fine. $100
  • Buick 231 heads, probably Ok but I would freshen them up. $150
  • Scout II axles- Open diffs, 3.73 gears, too wide for my Jeep project. $200 for the pair.
  • 50’s jeep truck chassis with 4×4 axles $275or offer
  • Mark at 530-906-1797″

http://sacramento.craigslist.org/pts/1412975807.html

[fb_button]
 
To Top

Koenig PTO Winch Pojoaque, Nm $80

October 4, 2009 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
2

Here’s a cool old winch.

“Koenig Iron Works Winch front PTO driven. this came off of an old Willys Jeep. I only have the winch, none of the drive lines that hook up to the transfer case. The unit free spools and locks into gear.  Call and leave a message if you are interested. 505-670-8419. I will return your call as soon as I can.”

http://santafe.craigslist.org/pts/1406721078.html

winch_pto_pojoaque

[fb_button]
 
To Top

Monroe Lift Parts Danville, VA **SOLD**

October 4, 2009 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was Make Offer.

I’m not sure what it would take to get the other parts necessary to make this work.

“I have a Monroe 3 point hitch for a willys jeep in good restorable condition with the tank/controller. no pump. does not include link arms or pto just the lift and controller. Will take trades or cash, make me an offer and we can go from there,”

monroe_hydraulic_parts_danville

[fb_button]
 
To Top

Completely Reconditioned 6 Volt Starter

September 29, 2009 • CATEGORIES: CJ-2A, Parts This site contains affiliate links for which I may be compensated.
0

A reader named Mike asked me to post this.

“I have a completely rebuilt a CJ-2A starter. It has a new bendix.  The guts have all been cleaned and turned.  The bushings and brushes have been cleaned.  I even have the new bushing that goes in the bellhousing. Its a 6 volt starter.  It came out of a 1947 CJ-2A.  I put a 12 volt starter in and so do not need it anymore. I invested 150 dollars, so want to get 100 dollars for it.  It’s in excellent condition.”

starter3

starter2

starter1

[fb_button]
 
To Top

City Engineering Winch? Eaton Rapics, Mi $125

September 17, 2009 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
0

Well, this is cool.  I’ve never seen one of these before.

“This 12 Volt Electric Winch came off a 1963 Willy’s CJ 5 and works well. It was made by City Engineering INC, Indianapolis, Indiana. Serial No. 79912. This is an authentic winch and would enhance the look of any jeep. For questions or to arrange a time to see this winch, please call Ralph at 517-582-1104″

http://lansing.craigslist.org/pts/1374262504.html

winch_eatonrapids

[fb_button]
 
To Top

A Budget Friendly E-Brake

September 12, 2009 • CATEGORIES: Features, Parts This site contains affiliate links for which I may be compensated.
0

A reader named Robert noted my interest in an alternative emergency brake.  He purchased the one to the right and says it looks pretty good, though he still needs to install it.  While this isn’t exactly what I’m seeking, it is a great price at $4.95.

“Can be made to fit many applications. Originally designed as brake cables on Military trailers and Jeeps Unused/Unissued. Handle style and color may vary.”

View the brake at Coleman’s Military Surplus

[fb_button]
 
To Top

Willys Jeep Heater **SOLD**

September 1, 2009 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
7

heater1UPDATE: Mike has informed me that this sold.  I”ll leave this here so the comment thread stays intact.

Mike writes, “It has a new 12 volt motor with a core that was fixed at a shop.  It is nice not rusted or beat up.”

heater2

[fb_button]
 
To Top

Diamond Plating Question

August 27, 2009 • CATEGORIES: Features, Parts This site contains affiliate links for which I may be compensated.
5

Several of our finest in Blue from Arizona read ewillys daily.  One of the readers asked about diamond plating for old flatties.  I can’t say I was much help, but maybe some of you have a suggestion?

Here is what I wrote:

It appears Warrior Products (http://www.warriorproducts.com/order.html) is the only company making them still (that I can find).  Most of the links below are the same product sold at different prices.

Here’s some options for side plates:
http://www.rjroffroad.com/warrior-sideplates-for-45-55-jeep-cj2a-cj3a-offroad-pr-17046.html
http://www.kaiserwillys.com/category/willys_warriorcornerplates
http://collinsbros.stores.yahoo.net/alsidplatpai.html $115 (for cj3a …  cj3b not mentioned)
BEST PRICE:  http://www.central4wd.com/inventorydetail.aspx?page=id|9288;folder|5701

Here are corner options for corner plates:
http://www.central4wd.com/inventorydetail.aspx?page=id|9269;folder|5709
http://www.kaiserwillys.com/product/1830/willys_warriorcornerplates
BEST PRICE I FOUND:  http://collinsbros.stores.yahoo.net/alcorguar.html $109.95
USED:  http://seattle.craigslist.org/oly/pts/1338556016.html

Used Jeep Junkyards (maybe they have some):
http://collinsbros.stores.yahoo.net/usedjeepparts.html (Wylie, Tx)
http://www.jwjeep.com/ (Antelope, CA)
http://jeeprepublic.com/ (Englewood, CO)
http://www.ewillys.com/?p=5067 (Kingston NY)

Working with Diamond Plating:
http://www.quadratecforum.com/showthread.php?t=72275

How to Polish Aluminum Diamond Plating (Something I didn’t know)
http://www.ehow.com/how_4556441_polish-aluminum-diamond-plating-mothers.html

[fb_button]