emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
This runs. Looks a bit tired.
“Great restoration project!!! Runs Good.
For more informaion call:
Call 770-616-2514”
http://atlanta.craigslist.org/sat/cto/3301000569.html
UPDATE: **SOLD** Was $5000
(04/28/2012) The body may be solid, but it’s been patched along the driver’s side.
“1948 Willy’s CJ2A Jeep. Needs head gasket, which is easy to replace on Flathead 4-cyl. I just have no time. Body is solid with some rust, which is expected for a vehicle that was built in 1948. 4wd works great. Soft top setup. E-mail for more details or if you would like to stop by and take a look. Located in SW Roanoke City.”
UPDATE: **SOLD** Was $1800.
This is a project.
“I have a 1946 Jeep Willys it’s a project Jeep. it has a Chevrolet 4.3 Vortec motor also has the original t90 3 speed transmission and twin stick transfer case. brand new clutch kit. I have done a disc brake conversion to the front also have an extra set of axles complete front and rear. things I don’t have to complete the job or a fuel tank, brake lines, the steering needs to be finished, exhaust, seats need to be installed. the body is a little rough too.the frame has been sand blasted and primered.”
This 8×10 photograph shows an early CJ-2. Note the “JEEP” on the hood in place of the later “WILLYS”. Also note the position of the spare tire.
View all the information on eBay
Adam bought himself a Willys truck, so he is selling his CJ-2A. It has a buick v6, power steering and brakes, and brand new tires and rims. You can contact Adam at: adam1 at sonic.net
43
UPDATE: Was $2500. **SOLD**
It looks like the body has been patched along the sides.
“1946 willys jeep. Has nearly new removable soft top. Full roll cage. newer tires. Has original engine. Runs good. 12v converted.”
UPDATE: Price dropped to $4700. **SOLD**
(08/31/2012) This is a nice older build. I like this one.
“1948 Willys CJ2A Jeep
Buick 225 V6 rebuilt in 2004 w/less than 500 miles/year
3 speed w/overdrive
538 gears
Original body/always garaged
Full top and bikini top
8000 lb Warn winch
Tow bar
Power steering/tilt column
Spicer powerlock rear end Dana 44 / open front Dana 25
Selectro hubs
Rancho Springs
New tires
Can rack
BTW–the long silver thing across the back behind the spare tire is a covered handyman jack”
UPDATE: **SOLD** Was $12,000
“1946 Willys Jeep CJ-2A
Excellent condition
Runs great and looks great
New parts:
Brakes
Transmission (10 miles)
(Engine is original)
Alternator and battery
Winch
Complete steering
Front hubs
600×16 Military type tires
It has been converted to a 12v system”
UPDATE: Was $1200. **SOLD**
UPDATE: **SOLD ** Was $4500
(09/22/2012) I have a rock crawler made out of a 1948 Willy’s tub and frame wrapped around a 350 Chevy out of an early 70’s Camaro or Corvette.
The specs:
350 Chevy with new motor mounts. Runs great its an 010 block really sought after lots of power with a Quadrajet carb, doesn’t cut out when on a steep incline.
-Custom headers with adjustable back pressure Supertrapp exhaust.
-37″ iroks, 85-90% tread
-Full PSC hydro steer with dual 8″ ram. Has entire PSC kit with reservoir. Only 4 trips since new.
-Dana 44 wagoneer axles, locked. Front axle just rebuilt. Disc brakes in front, recent disc conversion in rear with painted calipers. Only 4 trips since new.
-4 linked rear, 3 linked front. 16″ nitro shocks in rear.
-5 point Crow seats and harnesses
-Custom roll cage with tonneau cover
-4 speed tranny and NP 205 transfer case
-Cool thing with it being a 48 means it can be registered as a street rod and that makes it street legal.
-Have Idaho title in my name in hand.
-Only possible trade for 4×4 cummins.”
