UPDATE: **SOLD** Was $3000

“1946 Willys CJ2A project for sale. I bought this jeep in New Hampshire last fall from a guy who said this jeep was “Done Right”. Well, my inexperience paired with my enthusiasm for the jeep impaired my vision. When I started sanding the bondo bubbles, I found that the whole back end was gone. I hired a guy to cut it all out and replace everything with 16 gauge steel. Now that everything is metal and this jeep is solid I am looking to sell it to someone who has the skills to finish the project and live the dream. Needs some bondo skimming over the grinded welds and where the new steel meets the old. It needs a radiator bracket fabricated to hold the brand new custom aluminum radiator that I bought for it. It needs a bracket modification to fit the alternator back on since I put a shallow water pump in. then this jeep should be ready to cruise around town and off road. There are other things of course, but you get the idea. It ran and drove when I bought it last fall. It just needs to be put back together.

the good: Has YJ leafs springs in the front which give it a big lift
Has a running 327 sbc motor
Has a muncie 4 speed
Has 34″ super swampers in 80% condition
Its all solid steel
Now its “Done Right”
Frame is Solid
Custom Dual side exit exhaust
all new brake lines”

UPDATE: Price dropped to $1500

(06/15/2010) I think it is time for me to create a post on how to take a good picture, issues of light/shadows, what to take, and what not to take ….

“1947 Willys CJ2A LIFTED, 33″ MUDDERS, 15X10 WHEELES, NEW MASTER CYLINDER, RADIATOR, SHOCKS, STEERING STABALIZER, ALL NEW OUTPUT SEALS ON TRANSFERCASE AND FRONT AND REAR END, ALL NEW U JOINTS ON BOTH DRIVE LINES, NEW ALTERNATOR, WIRES, PLUGS, POINTS, CAP ROTOR, COIL, AND WIREING. CALL JIMMY AT 208-687-1846 OR E-MAIL j1f150@yahoo.com”

http://spokane.craigslist.org/cto/1820043059.html

That almost looks like a DJ-3A body based on the dashboard.

“1947 Willis Jeep, has been completely restored. Under the hood is a V6 motor- 3.8 Commando AMC with only 500 miles. Jeep has 1974 frame and running gears out of a C-J5. New Kaiser top,and new brakes. Tires are in very good shape, 1250-32 x 15. Interior is in good shape with racing bucket seats. Have title in hand. Must see to appreciate, more photos available. On site buy only. Will consider possible trade to S-10 Pickup 1995 and newer. My cell: 423-489-7558 and ask for Billy.”

http://lexington.craigslist.org/cto/1813794595.html

UPDATE: **SOLD** Was $700.

Dan forwarded this ad. I think ROUGH accurately describes this project.

“1947 Willys Jeep with clear title. Has original engine. Motor was running when last parked. But needs work. Great father & son project!  NO TRADES! NO TRADES! Not trying to be rude but I want to get rid of this not trade it for another…thanks.”

UPDATE: **SOLD** Was $3200

(05/19/2009) This jeep has got some updates, but is mostly updated stock.

“Like it says has the Flat head 4 engine new fuel pump, carburator, cap, rotor, plugs, wires, sending unit (12v.),master cylinder. tires are like new 31×10.50×15 mud tires one new chrome Crager wheel’s put fresh axles under it with 11″brake’s stock there 8″ with fresh brakes and bearings rear is a dana 44 front is a dana 30 has a Rancho 2 and 1/2″ lift all body parts have been sandblasted and repainted except the tub put a after market steering wheel in for easier climbing in and out has been converted to 12v. with a GM Alternator all new wiring has all three seats which is hard to find has a roll bar for the back not shown runs and drives great!good little Jeep just got me a new project so dont need this one anymore! $3200.obo ”

There appears to be some usable parts on this.

“rough willys, not sure of year, good for parts or restore, does not run, roll, or steer. It has a small v8 in it and there are a couple of mice living in it. It is in my driveway and my wife wants it gone, I can’t understand why. If interested call 860-836-4994”

http://hartford.craigslist.org/cto/1814770628.html