emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
Looks solid.
“Cj2A Willys Jeep “Slow Poke” runs good, great tires, lots of extras. No trades!”
https://fortsmith.craigslist.org/cto/d/cj2a-willys-jeep/6355100355.html
UPDATE: **SOLD** Was $4500.
This 2A with a sears aluminum top also has a rear PTO. It runs, too.
“1948 Jeep Willys with PTO. Runs! New gas tank, new brakes, other new parts. Not totally sure that it is a “48, but a Jeep collector will know for sure.”
UPDATE: **SOLD** Was $1500.
Has a tilt front end. Lacks a title. It’s a project.
“Willys jeep project for sale. 305 Chevy, Ford top loader 4 spd. Dana 44 front. Dana 41 rear. Motor runs and tranny shifts well. Lots of motor goodies. Most parts are there to finish. Will do bill of sale as there is no title. I repeat, no title. There is a DMV assembled tag on frame.”
UPDATE: **SOLD** Was $3000.
(09/17/2016) “46 cj2a. Good body. New 3in body lift , Buick 225 fireball v6. New clutch Good tread on tires. , tilt column steering Moving. Hate to sell. Needs to be finished.
$3000 or best offer. .”
UPDATE: Price dropped to $4500.
(06/22/2017) Has some interesting mods to the rear.
“Solid starting point for a project. Pre 57 283 with LT-1 intake, advance adapter headers, advance adapter side pipes, 2 piece scatter shield, Muncie 4 speed, warn overdrive, Dana 20 transfer case, custom built front and rear drive shafts, Dana front with a DANA 60 rear (yes that is a 1 ton rear end) end both sporting 5:38 gears. Body not rotted and the floors are good. Locking hubs on the front. GM steering box and column, Hurst linkage, 2 10 gallon fuel tanks. Sand roll bar with a full cage. Same owner since around 1979. I wanted to rebuild it to it’s former glory but just don’t see it happening.”
https://sfbay.craigslist.org/pen/cto/d/1948-cj/6362079843.html
Appears solid.
“Great condition ! Runs like a Swiss watch. Motor rebuilt by previous owner. 4wd & high /low range work as they should.
Clear antique title in PA.”
https://elmira.craigslist.org/cto/d/willys-jeep-1947/6360871142.html
UPDATE: **SOLD** Was $8800.
(07/07/2017) Has some mods to the rear of the body.
“Parade ready Jeep done up as a US Air Force vehicle. It is a 4×4, 3 speed w/reverse, hi/lo range. Has been converted from 6 to 12VDC with alternator. Gauges work, has windshield wiper and period heaters for driver/passenger. Has a canvas half-top and many other new parts. The original flathead four runs well, and vehicle drives good and comes with a custom made tow-bar and vehicle cover. Currently registered with Antique plates.
VIN # CJ2A185125…………….a unique ride, and a real head turner.
I am 6’2″ and 230 lbs and don’t fit well into this Jeep, a little too tight. As far as I know, this has only been used for parades since being restored by previous owner a number of years ago, and I have only put about 25 miles on it.”
This has rear PTO w/ drum pulley and saw.
“I have a original 46 Willy’s chassis with 5:38 gears and factory lockers with pto and saw with blade looking for 1000 for the package”
https://providence.craigslist.org/pts/d/willys-chassis-and-pto-saw/6361176176.html
UPDATE: Still Available.
(09/07/2017) A project.
“I have a 1948 jeep I planned to restore but my priorities have changed. This is a simple vehicle to operate and work on, parts are readily available. No electronics whatsoever.Four Wheel drive,carburetor, mechanical fuel pump, etc. When a solar eruption or N. Korea causes our all electronic life style’s to cease this would be the vehicle to get you there. It needs a battery, alternator and possibly a starter. I am including some new parts with it such as a replacement drriver’s seat, a $300.00 wiring harness, Turn signals all 12Volt. Surprisingly little rust.”
https://vermont.craigslist.org/cto/d/1948-jeep-cj3a/6364215427.html
UPDATE: Price dropped to $1200.
(09/03/2017) Koenig top resting on the back?
“Project jeep. Needs full restoration. Have extra drive train. 3 sets of axles. Extra solid frame. One piece fiberglass nose. Thinning the heard. I can do the bodywork for you at additional cost”
https://newhaven.craigslist.org/cto/d/47-willy-cj2a/6358440183.html
