UPDATE: **SOLD** Was $16,000.
Looks good.
“museum quality cj2a jeep new body chassis everything rebuilt or new 98 % correct”
UPDATE: **SOLD** Was $16,000.
Looks good.
“museum quality cj2a jeep new body chassis everything rebuilt or new 98 % correct”
UPDATE: **Status Unknown** Was $7600.
“1946 Willys Jeep CJ-2A CJ Great Flat fender – (Saint Paul, MN)
1st civilian model
We did a frame off restoration in 1994. (including engine rebuild, tranny rebuild, etc….)
Runs and drives great. It has a warn overdrive (rare), which enables it to go 50/55 mph.
We have owned it for about 21 years. We recently tuned it it up. (Master cylinder, cap, rotor, plugs, and carb adjustment, oil change and pan re-seal, new alum radiator, water pump, and alternator (GM Style).
(pictures don’t show new radiator and alternator)
Tires are in great shape.
4 wheel drive works well, and the transfer case works properly. All electrical works as well. We hate to let it go, but have too many Jeeps. It is only used to plow our driveway – this is not its’ primary function.
Please call with any questions. I prefer you call between 4:00pm and 8 pm. The Jeep is currently in heated storage in Anoka, but can be taken out. (wed evenings work well for me) Please call instead of emailing (I am posting this for my father, he does not do Craigslist)”
The drain holes have been filled.
“Military Jeep in good shape, recent tune-up. Original flathead engine and drive-train. Call for info.”
UPDATE: **SOLD** Was $4500
(06/19/2015) Has a few updates/mods.
“Nice looking 1948 jeep willys runs good !!! Call for more info”
UPDATE: Still Available.
(11/12/2016) Pics posted.
“Early 1946 Willys Cj2a that runs, drives, and stops. The body is original and has been patched over the years. Rare column shift (3 on the tree) transmission. Engine could use rings as it smokes/burns oil but has lots of power. A perfect winter rebuild project! One tire has a slow leak but all are matching and like new. I plan on getting the leak repaired..”
http://northernwi.craigslist.org/cto/5970388329.html
UPDATE: **SOLD** Was $500
“I have a 1942 willys jeep tub and frame. It’s in pretty good shape. Some small rust holes in tub. I have a few pictures I can text if your interested. I’m not sure the title situation. I don’t have it and I’m not sure what it takes to get one for it. (I planned on making it off road only)
the willys is located in Myrtle Creek. I will send pictures if your interested. I’m asking $500.00 for its condition its is a steal. I just need it gone and out of my yard.
call, text, or email with any questions.”
Runs and drives.
“4×4 shop said this willy is worth $7500,,, I need cash!!!! Metal Tub and Hood,, Runs Great, Taggged threw june, daily driver,starts right up, mid 90’s chevy 4.3 Fuel injected V6
Chevy tilt steering column on board computer and obd2 turbo 350, Posi, 31×10.5×15 Remington wide brutes like new, New Rims, Custom exhaust,, was going to make seat frames and chop wheel well in next couople days.
Clean Runs great!!! relocated new fuel tank, electric fuel pump,,,to much power….
0 rust, No leaks…….
vin in 11,000’s nv !!!! i have a spare computer and hood, not installed yet,,.Must see and hear to appreciate, Cash or harley,, Snap on and cash,,,.,.etc,..What ya got.”
UPDATE: **SOLD** Was $25,000
(12/01/2015) Has a variety of updates. Looks well built.
“For Sale from our personal collection here in Mobile, Al. is this breathtaking and “Genuine 1946 Willys CJ Jeep 4X4”. Total “Custom” restoration with all upgraded components in excess of $40,000 !!
This is not a new jeep, very real and titled as a 1946.
Late model V-6 Engine, Automatic Transmission, Custom front and rear axles, Warn hubs, Power Steering, New full top with doors, Bikini top also has never been installed, heater, ti”
Runs and drives.
“Was posted as not driving earlier but I fixed the transmission issue.
1948 Willys CJ-2A, aka Jeep, was summer project, asking $3,500 or best offer, if you got a good Stihl or husky saw (20” bar preferred) to negotiate with that’d work. NO OTHER TRADES.
Lots of recent work:
Fluids changed: Gas, oil (and filters x2), transmission, transfer, front differential (all with correct “safe for all metals” fluids) coolant, brakes. New coolant temp gauge. New fuel pump, new fuel hose (second tank not hooked up yet). Parking brake refurbished, new parking brake cable and cable housing, New front brake lines, Front hubs and bearings re-greased. Carb re-gasket/rebuild new choke cable, cable housing, pull piece in cab, new air filter. New speedometer and cable. Electrical cleaned up, headlights and brake lights operational. I have brake master cylinder gasket rebuild kit, it didn’t need it. Skid plate was cleaned up but I didn’t remount because I was still working on speedometer. Added front tow attachment, and rear hubs can be un-locked for easy flat towing.
It starts powerfully, runs and drives well but I have no time to play or take it to the next level.”
UPDATE: Status Unknown. Was $5500.
It’s a project.
“1948 Wills Jeep, Chevy 4.3L engine with headers, Rebuilt turbo 350 new torque converter, Rebuilt Dana 18 with Advance Adapter, Saturn Overdrive, Rebuilt & shortened 1/2 ton chevy 12 bolt with 4:10 Posi, Rebuilt & shortened chevy Dana 44 front axle with 4:09 W/locker, New Aluminum Radiator, opened up rear fender wells, Role cage, new tailgate & many more parts to go with it such as drivelines, front locking hubs, disc brakes,,,,etc…This has been a fun project for me & would be a great project for someone else to finish.”