CJ-3A Research Archives

CJ-3A, CJ3a

To Top

Year? CJ-2A? Coos County, OR **SOLD**

• CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: *SOLD** Was $3800.

(03/23/2013) The price on this looks good. The body looks like a CJ-2A/3A rather than a ’44’. The windshield appears to be a 3A rather than a 3B.

“My wife and I are getting rid of our beloved CJ-2A Willy’s Jeep. We have had this rig for around 10 years and have done a great deal to it. It still needs some minor work as all restoration go, but baby runs good and catches the eye. We have had it in the Ocean Fest Parade many times and we take it on rides to the beach, dunes and the hills. Never hot rodded and adult owned. It has the F-134 4 cylinder, new carb, water pump, head gasket, clutch, pressure plate and throw out bearing, master cylinder, exhaust, brakes, bench seat for two extra passengers, roll bar, bikini top, spare tire, 5 gallon Jerry Gas Can, new gauges, new fuel tank, electric fuel pump, CB radio, and more stuff. The body was removed, most rust removed or treated, body was undercoated, frame was wire brushed down, treated with good quality rust kill, primed and undercoated. Paint is a Fountain Green with metal flake. several repairs on the body was done, but not perfect. We did it this way so we could use it and not just for parades or shows. We have 3 Border Collies and they love the ride. The engine is from a 50’s Willy’s. The tub is a “44” and the windshield is off a CJ 3B. Many Jeeper folks do that due to the look. We have a windshield frame that comes from the 40’s and the rig also comes with an extra Tranny with Transfer case and other extra parts that was on it originally. It also has a tow bar, magnetic lights for towing and small brush guard, mainly for the tow bar to secure it to when driving the jeep.
My wife loves “Smokey the Bear” and that’s what we put on it.

You can contact me at : willysdude47@hotmail.com When you do, put “Willy’s” in the subject box and I’ll know you’re real. Anything else will be considered spam and dumped where it belongs. Take care.”

year-cj2a-coosbay-or1 year-cj2a-coosbay-or2 year-cj2a-coosbay-or3

[fb_button]
 
To Top

1950 CJ-3A Tiverton, RI $8500

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

The seller notes this has “all new everything”, but that’s certainly not the case. This includes a rear PTO.

“1950 cj3a This jeep was brought down to bare frame and fully restored. The frame was perfect just sandblasted and painted no patches. All new everything. Left it original 6volt rebuilt starter and generator, new wiring, guages work. Has rear PTO. As you see in the pictures I couldn’t bring myself to redo the tailgate perfect patina. Very nice jeep just in time for summer.
$8500 or best mpdff17@msn.com call or text 401-481-2843”

http://providence.craigslist.org/cto/3717951033.html

1950-cj3a-tiverton-ri1 1950-cj3a-tiverton-ri2 1950-cj3a-tiverton-ri3

[fb_button]
 
To Top

Hugo’s CJ-3A in Uruguay

• CATEGORIES: Builds, CJ-3A, International This site contains affiliate links for which I may be compensated.

Hugo lives in Uruguay and has spent four years restoring this CJ-3A (see a report from 2011 here). As you can see from the pictures, he started with a pretty rough vehicle. As the pictures demonstrate, he seems to be enjoying the results of his hard work. Thanks for sharing Hugo.

Before:

hugo-cj3a-uruguay1

After:

hugo-cj3a-uruguay3

hugo-cj3a-uruguay4

hugo-cj3a-uruguay2

[fb_button]
 
To Top

1950 CJ-3A Chassis Charlottesville, VA **Status Unknown**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **Status Unknown** Was $5000.

Seller needs the garage back.

“1950 CJ3A nut and bolt restoration on solid frame. Complete rebuild of all components with new bearings seals and components. Over $10,000 in parts without labor. Includes extra Fhead engine. Current VA title. Rebuilt engine prepared for unleaded gas. Reduced Price. Need the Garage!!!”

1950-cj3a-charlottesville-nc

[fb_button]
 
To Top

1956 Flatfender Roseville, Ca **Status Unknown**

• CATEGORIES: CJ-3A, DJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Was priced at $6500. Status Unknown.

(05/12/2012) This looks like a very nice jeep.  Based on the location of the gas inlet in the back, I’m going to guess this started life as a DJ-3A.

“New 350 Chevy crate engine
rebuilt 350 turbo
Power steering
New power brakes
Detroit Lockers front and rear
8000lb winch
Towbar”

1956-flattie-roseville-ca4

[fb_button]
 
To Top

1952 CJ-3A Maryland eBay

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Back on eBay

(03/05/2013) This seller is buying this along with another car and doesn’t need it. This includes a rear PTO, Drum, and Saw.

“This is a nice car, it looks great!!

The car has had a lot of work done, and it runs well. It was owned by a mechanic who was able to give it TLC. The tires are new. This is not a rust bucket. I took some a pictures up close of a surface rusted area which is minor on RH side.

The car is with a Cadillac and I have to buy the pair, I am a Caddy guy and want to move this one.
301 672 1000. Can store car for 60 days.Car will drive anywhere no problem.”

View all the information on eBay

1950-cj3a-maryland

[fb_button]
 
To Top

1953 CJ-3B & 1953 CJ-3A Shelton, WA Status Unknown

• CATEGORIES: CJ-3A, CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Status unknown. 

(03/25/2013)

1953 CJ-3B: This green jeep is a 1953 CJ3-B – high hood. Project jeep for $1,500.

cj3b-roger-garrick

1953 CJ-3A: This blue jeep is a 1953 CJ3-A with a Buick V6. $1,500. The body is likely a lefty from a 2A (perhaps other parts are 2A too?)

1953-cj3a-roger-garrick

[fb_button]
 
To Top

Year? Flattie Parts Burbank, WA No Price

• CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

There is some value here.

“Old Willys jeep.
Got this with a property buy, but don’t need it.
Body, frame, bell housing, radiator, inner fenders, fenders, extra grille, axles, wheels, and windshield. All in decent/good shape.
Please email with your contact info, and I’ll call you right back. Open to all serious offers.”

http://kpr.craigslist.org/cto/3703422127.html

year-flattie-burbank-wa1

year-flattie-burbank-wa2

[fb_button]
 
To Top

1945 Flattie Gainesville, TX **SOLD**

• CATEGORIES: CJ-3A, MB • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay

(03/13/2013) This seller has provided a detailed list of parts and work. It looks good.

“FRAME  Boxed and cross strengthen front and rear.  FRONT AXLE  Custom  rebuilt from 69 M38A1 4:27 ratio. Differential & Disk brakes from Drive Train Whse.  STEERING Upgraded .50in to 1.25in from 69 Army 1.24 truck. Steering arm & box rebuilt from GM Saginaw off a 78 Suburban.  REAR AXLE  Dana 44 Summers Brothers one piece SAE4340 advertised to withstand 1400 ft pounds torque.  DIFFERENTIAL Reider Racing Power-Lock.  REAR BRAKES 11” X 2″ drum from Drive Train Whse.  ENGINE Custom built by SFD Engines of Dallas.  330 HP &423 foot lbs torque @3300 rpm.  355ci, 4 bolt main small block Chev, Flat top hypereutectic pistons, Total Seal moly rings.  Comp Cams “off road” high torque cam. Intake lift .442 duration .288. Exhaust lift .465 duration .298. Heads are TrickFlow TwistedWedge, aluminum model TFS-31400001, 64cc chambers. 2.02/1.60 stainless steel valves CNC ports. Compression ratio 10.4. Rockers are Crane Cams Gold Race #CRN-10759-16.  1.6 ratio needle bearing.  Block was magnafluxed, line bored with to rque plates, crank was turned cambered & polished. Rods are chev “pink” resized & aligned.  All rotating engine assembly balanced to under .04 grams.  Oil pump is Melling high volume/pressure . . . view more info on eBay”

1945-mb-gainesville-tx

[fb_button]