| Willys Jeep Gas Tank CJ-5 1959-1972 – $185 Wyoming, MN |
| OMIX-ADA Fuel Tanks for 1959-1972 CJ5, 1959-1971 CJ6, 1955-1958 WILLYS – 17722.05 |
| INFORMATION FROM SELLER: |
| New OMIX-ADA polyethylene underseat tank. Part# 17722.05 |
| https://grandrapids.craigslist.org/pts/d/wyoming-jeep-gas-tank-cj/7921312413.html |
CJ5 Research Archives
Willys jeep CJ-5 $300 Frackville, PA
| Willys jeep CJ-5 $300 Frackville, PA |
| Andy’s Picks- Tuxedo Park chassis and running gear including side shift / column shift |
| INFORMATION FROM SELLER: |
| Willys jeep cj5 chassis with 4cyl motor ( motor is stuck) but mostly complete,also transmission and transfer case,and both rears,,this is a column shift and probally was a mid 60’s tuxedo park,,has warn lock o matic hubs,this is for parts has no title,,,frame is rusty 450.00, 300.00 |
| https://www.facebook.com/share/18Us5ZwjTc/ |
Jeep Warn Lock-O-Matic Hubs $300 Clarksville, AR
| Jeep Warn Lock-O-Matic Hubs $300 Clarksville, AR |
| Andy’s Picks- NOS Warn Hubs |
| INFORMATION FROM SELLER: |
| New old stock warn loc o matic hubs 10 spline for Willys jeep $300 obo |
| https://www.facebook.com/share/1HjnNVonSb/ |
Howe Firetruck Box ***PENDING*** $800 Scott City, KS
| Howe Firetruck Box ***PENDING*** $800 Scott City, KS |
|
Andy’s Picks- Howe CJ Fire jeep tub ***PENDING*** |
|
INFORMATION FROM SELLER: |
| A hard decision has been made to sell my Howes firetruck box . It’s on a 1948 willys cj2a tub. The square tubing roll bar is not factory but can be removed to get it back to original look. The tag for the firetruck box conversion is mounted on the dash. No tags for the tub. If you want to title it that is not a problem (if you know, you know) there is also the rear bumper step. There are not many of these around. Pickup only in Scott City KS. |
| https://www.facebook.com/share/19cmHwvJEX/ |
Willys, CJ, AMC, Jeep parts – $6 Bellvue, CO
| Willys, CJ, AMC, Jeep parts – $6 Bellvue, CO |
| Couple large 0-9 Steward Warner Gauges here. I would pick them if local’ish, shipping would be too much for me. |
| INFORMATION FROM SELLER: |
| Here are just some of what I have as leftover and spare jeep parts. Look at the pictures, if there is something you are interest in, let me know. Please and thank you in advance. All parts function and operate as they should. |
| https://fortcollins.craigslist.org/pts/d/laporte-willys-cj-amc-jeep-parts/7913692087.html |
1969 CJ-5 Jeep – $4,500 Reno, NV
| 1969 CJ-5 Jeep – $4,500 Reno, NV |
| INFORMATION FROM SELLER: |
| No trades, cash only, first come first served. Sold as is. pickup in north Reno off Redrock.
This is a NV titled 1969 Jeep CJ5 with the Odd fire V6/Dauntless 226 engine. it is mated a T14 three speed with an overdrive. The four wheel drive works and it has newer manual warn hubs. The radiator has a auxiliary electric fan on a thermostat. This is wired for easy plug and play towing on a four pin connection. There is an under dash after market three speed heater that works. What needs work: The body is dented on the passenger side. The starter drags part of the time, the parking brake needs finished (cables shortened). Fuel gauge needs re grounded. Passenger side front brake needs adjustment as it pulls. Rear passenger taillight needs a new bulb. Windshield wipers are not hooked up. Not factory seats. The cab is the Meyers half cab fitted to the window frame, but without the doors. I do not have any doors. The mileage reads 11224 from a rebuild done before me and was left sitting for a while. The mileage will go up as I show it and continue to use it. The steering box is an upgraded Saginaw with a reinforced plate on the frame This is located in Redrock. |
| https://reno.craigslist.org/snw/d/reno-1969-cj-jeep/7922189213.html |
CJ-5 fiberglass front clip – $300 Danville / San Ramon, CA
| CJ-5 fiberglass front clip – $300 Danville / San Ramon, CA |
| INFORMATION FROM SELLER: |
| Early CJ-5 steel body and fiber glass 1pc front clip for pre 1972 CJ-5. Grill fenders, hood all in one. Good shape not perfect , inner fenders included, comes with hardware to keep the fender tails tightly secured to the cowl. This is the quality thikness for a driver jeep not the ultra thin racing version. Body tub is in good shape not perfect minimal rust. No registration or paperwork The new retail price for the front clip for is 850$ and that’s without the grill. |
| https://sfbay.craigslist.org/eby/pts/d/diablo-cj-fiberglass-front-clip/7916486473.html |
1962 Willys Jeep CJ-5 CJ-2A $3,000 Mt Gilead, OH
| 1962 Willys Jeep CJ-5 CJ-2A $3,000 Mt Gilead, OH |
| 5, 2A maybe a 3A lots of stuff here. Sounds like maybe parts of a GPW. |
| INFORMATION FROM SELLER: |
| 4 Willys jeeps, 2 engines with transfer cases and various parts, 1962 Willys, no title just bill of sale, was running when parked, has snowplow blade, 1947 Willys, TN title, has a rebuilt engine in it, 1947 Ford Jeep, have OH title, WWII Ford jeeps have no engines, All goes as one sale, will assist loading
Bought to restore the 1962 and the 1947. Wind storm blew some of tarps off Have medical issues and can not finish project. |
| https://columbus.craigslist.org/cto/d/mount-gilead-1962-willys-jeep/7922868041.html |
1956 Jeep CJ-5 $5,000 Ashdown, AR
| 1956 Jeep CJ-5 $5,000 Ashdown, AR |
| INFORMATION FROM SELLER: |
| I have a 1956 jeep has a factory hardtop with doors. It has a very solid tub 456 gears. It’s a very solid jeep for 56 model. My dad removed the motor and completely rebuilt it new pistons,rings,rod,main bearings new intake valves redid the head new fuel pump water pump new points in the distributor new plugs and wires. He has everything to put it back together has a 8000lb stand up warn winch, he has some more parts to go with it. Would make an awesome hunting rig or a farm rig, clean and clear title. He’s asking 5000 or best offer. We’re in Ashdown, Arkansas, and we can load. thank you. |
| https://www.facebook.com/share/1KJP7JpXTc/ |
1961 Jeep CJ-5 $1,300 Ellijay, GA
| 1961 Jeep CJ-5 $1,300 Ellijay, GA |
| Not a ’61, maybe ’55 or ’56? |
| INFORMATION FROM SELLER: |
| Old jeep not sure the exact year model. I bought as a project and don’t have time for it. It doesn’t run. Transmission is stuck in gear and needs a gas tank that’s about all I know about it. Body not in bad shape for the year. Does have a pto winch on the front. Asking $1300 obo or trade |
| https://www.facebook.com/share/1DQdjAx5Wg/ |




























































