Features Research Archives

To Top

One Part at a Time …

• CATEGORIES: Builds, Features • TAGS: This site contains affiliate links for which I may be compensated.
2017-04-14-Ramen-noodles

All work and no noodles makes David grumpy! Good thing I found a new Ramen noodle place just a few minutes away from my parents. I had them add some pork belly. It was awesome!

More progress on Rusty, one part at a time. I wanted to remove the u-joints so I could sand blast and paint the driveline.

2017-04-14-driveline4

To remove them, I used my favorite vice, something that’s been around longer than me. Using two different sized sockets (one to slide through and one to catch the u-joint as it slides through, I pressed it through. Make sure the grease nipple is NOT on the side you are pressing or it will cause you problems. This shows the u-joint after the springs are removed, but before I began pressing.2017-04-14-driveline5

This shows the u-joint after pressing it through. 2017-04-14-driveline6

Continue reading

[fb_button]
 
To Top

‘Jeep’ Traveller Ads

• CATEGORIES: Advertising & Brochures, Features, Old Images • TAGS: This site contains affiliate links for which I may be compensated.

Scramboleer Dan took the time to assemble these vintage newspapers ads for the Traveller (sorry it took me so long to get these posted!).

Willys ad - Honolulu, Hawaii  02

October 1, 1959, pg 15 of the Honolulu Star-Bulletin

Willys ad - Honolulu, Hawaii  05

October 24, 1960, pg. 12 of The Honolulu Advertiser

Willys ad - Honolulu, Hawaii  06

October 25, 1960, pg. 13 of Honolulu Star-Bulletin

Willys ad - Honolulu, Hawaii  03

Honolulu Star-Bulletin

A few years later we have some used Willys prices:

Willys ad - Honolulu, Hawaii

Some prices from the December 18, 1963, pg. 35 of the Honolulu Advertiser

Willys ad - Salem, Oregon

This Capitol Chevy ad is from the Salem Statesman-Journal circa 1965-1966.


[fb_button]
 
To Top

Victories ….

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

Short update. On Tuesday, after buying some parts and fixing some wiring, I got mom’s riding lawn mower running. She’s happy. I am happy.

On Wednesday, after buying a new motor and then upgrading the wiring to 230 … (It sure wasn’t plug and play) … I got the compressor working. I am even happier!

Compressor done? Check …

IMG_2993

Parts ready? Check …

IMG_2992

Parts blasted? Check …

IMG_2996

Nice to be making headway again.

[fb_button]
 
To Top

Wranglers and Swag

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

Just a couple posts for today … I spent yesterday morning working on my parents’ mower (an annual event). There was cursing and cussing (don’t know that there is a difference, but i uttered enough to fill both categories). After fixing a highly corroded wire and testing other parts, I finally concluded the solenoid needed replacing. I’ll be picking that up today.

I left that project for a trip to Edgewood, Washington, where I met Ron, a man selling his father-in-law’s 1991 Jeep Wrangler. Why was I looking a Wrangler? I’m helping the Vidal’s locate a newer jeep for their trip to Alaska. The price on this one was pretty good and the pictures showed well, such as this example photo:1991-wrangler

But, in person, there were dings, scratches, and plenty of imperfections. The man I met claimed the jeep was well-cared for, yet the shift boot was sticky all over with something, the floor was very black, as if it had just been painted (and their was overspray onto the roll bar), and the battery tie down was hanging from some wires across the engine compartment from where the battery was located. Something didn’t sit well with me about the deal (the seller was even ready to drop the price, despite all the calls he said he had on it), so I passed.

From there, I dropped by Rob and Diana Stafford’s place, where I looked through some of the giveaway items that the PNW4WDA, which will become an official sponsor, donated to the Alaska Or Rust venture. There were all kinds of t-shits, sweatshirts, hoodies, drink containers, and more.

pnw4wda-stuff

Then Diana showed me Rob’s progress on his flat fender rebuild. He was just going to do a few things to the flattie for the Alaska trip, but when he looked under the body, he realized his trail jeep needed a new one. I took a closeup look at the body’s old floor and I have to say that it was worse than Rusty’s floor! But now, with that new body, he’s definitely ahead of me!

robs-2a-2 robs-2a-3 robs-2a-4

[fb_button]
 
To Top

Bends, Cracks, and Mud

• CATEGORIES: Builds, Features • TAGS: This site contains affiliate links for which I may be compensated.

2017-04-10-rusty-remove-body3

There’s nothing like disassembly to reveal all the problems that remained unseen. Once the body came off, the realities revealed themselves.

The front cross member is cracked on the driver’s side (no surprise there — funny how I didn’t notice it with the body on it). The transmission is so packed with muck that I doubt any oil could leak through it. There are also some odd bends, like the mid cross member, which had something hit it with enough force to bend one side. Maybe the driveline broke at some point and flew up into it? Of course, there were rusty bolts, too, some which not even PB Blaster could save. At least it is getting closer to being disassembled.

The first big event was the removal of the body. I used a block and tackle to pull the body off:
2017-04-10-rusty-remove-body01

2017-04-10-rusty-remove-body02

2017-04-10-rusty-remove-body2 2017-04-10-rusty-remove-body1

Continue reading

[fb_button]