Parts Research Archives

To Top

CJ-2A Body Sulphur, LA $500

January 10, 2020 • CATEGORIES: Body Parts, CJ-2A, Parts This site contains affiliate links for which I may be compensated.
0

UPDATE: Still Available.

(08/16/2019) This body has had lots of work done to it.

https://lakecharles.craigslist.org/pts/d/sulphur-cj2a-willys-body-for-sale/7049702426.html

cj2a-sulphur-tx1 cj2a-sulphur-tx2 cj2a-sulphur-tx3

“During a frame off restoration we realized the body we have does not match the frame. The body (tub, fenders, hood, front and rear bumper) is for a ’48 vintage CJ-2A. Fenders and hood are in excellent shape. Hood has a customized box that was installed to accommodate the non-stock (for the body) engine. Tub is in average condition. Body mount channels on the bottom have some wastage and will need to be replaced. The storage bin under the passenger seat is missing. Otherwise, repairs have been made to previous wastage. We need to make room for the new body.
Entire body was on an operational chassis and was driven. As-is, it is functional. Restoration will require attention in the above areas.
I also have the front grill and windshield. Am not sure if I’m going to repurpose those but if not, they will be included with this body.”

[fb_button]
 
To Top

Monroe Lift Westbrook, CT **SOLD**

January 5, 2020 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $1500.

Matt’s selling this Monroe lift. Interested parties can contact him 860 304 3639 (call or text).

“I have a Monroe lift set up I would like to sell. Included is the lift assembly which is in very nice shape with no broken tabs, leveling arm, drop links, lower links, and one chain assembly. Everything in the picture is included and nothing else. Shipping is available through Fastenal. I am asking $1,750 obo. Located in Westbrook, Connecticut.”

monroe-lift1

monroe-lift2

monroe-lift3

monroe-lift4

monroe-lift5

[fb_button]
 
To Top

Cutlas Selective Drive Hubs Viroqua, MN **SOLD**

January 4, 2020 • CATEGORIES: Parts • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $100.

These 10-spline hubs were called the Cutlas Selective Drive Hubs. Some has the indent through the middle like this set, others did not.

cutlas-hubs9

“For sale is a set of vintage Cutlas 10 spline locking hubs for Willys Jeeps. These were removed from a 1951 M38 with 20,000 original miles. The hubs were added after its Military duty so they are very low mile and in fantastic condition inside and out. Photos were taken as they came off the M38, clean as can be inside. Only reason im parting with them is because I returned the hubs to Milspec/factory configuration.

Should fit DANA 25/27 Willys MB/GPW, CJ2A, CJ3A, M38, CJ3B as well as some Willys wagons.”

[fb_button]
 
To Top

A Couple Piles of Parts Tucson, AZ **SOLD**

January 3, 2020 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
3

UPDATE: **SOLD** Was $900.

Not sure how much value, but there’s a wide range of parts.

“Willys Jeep parts. Way too much to list. See pictures. $900 takes Everything!”

jeep-parts-az0 jeep-parts-az1 jeep-parts-az2 jeep-parts-az3

[fb_button]
 
To Top

WW2 Fenders Fresno, CA **SOLD**

December 30, 2019 • CATEGORIES: Parts This site contains affiliate links for which I may be compensated.
3

UPDATE: **SOLD** Was $80.

Looks like a good price.

“Original factory Willys jeep front fenders. In great condition. Came off a 1946. $80 for both.”

military-fenders-fresno-ca

[fb_button]
 
To Top

Fiberglass Body Canton, OH $400

December 29, 2019 • CATEGORIES: Body Parts, Parts • TAGS: . This site contains affiliate links for which I may be compensated.
0

It’s been cut up, but it would still make a fine race or offroad body. Fiberglass shells are often used for race jeeps around the PNW.

https://akroncanton.craigslist.org/pts/d/canton-willys-jeep-fiberglass-tub/7044643828.html

“Fiberglass Willys tub has brake master cylinder petals and steering column was going to use this and make a rat rod jeep but I Lost interest in it so this one needs to go”

fiberglass-body-canton-oh

[fb_button]
 
To Top

Kelly CJ-3A Half-Top Carlisle, PA **SOLD**

December 27, 2019 • CATEGORIES: Parts • TAGS: . This site contains affiliate links for which I may be compensated.
4

UPDATE: **SOLD** Was $400.

(12/10/2019) Looks like a good price.

“Kelly steel 1/2 top and doors removed from a 1952 Willy’s CJ3A. Good condition, some rust where the top meets the rear floor area. (see pictures) $400 obo”

1952-kelly-halftop-carlisle-pa1 1952-kelly-halftop-carlisle-pa2 1952-kelly-halftop-carlisle-pa3 1952-kelly-halftop-carlisle-pa4

[fb_button]