Tulsa Winch $900 Blanchard, OK
INFORMATION FROM SELLER:
Tulsa Winch. PTO winch that’s in good working condition. 20,000 pound capacity, heavy duty winch. May be open to trades, shoot me a text.
Tulsa Winch $900 Blanchard, OK
INFORMATION FROM SELLER:
Tulsa Winch. PTO winch that’s in good working condition. 20,000 pound capacity, heavy duty winch. May be open to trades, shoot me a text.
1949 CJ-2A $5,000 Princeton, NJ
Andy’s Picks
This is posted in a FB Group so you might have to Join to see this one, no contact info really posted and don’t see the Marketplace ad, here are the pics. Some neat parts on this one, Tim
INFORMATION FROM SELLER:
1947 Willys CJ2a. Good title. Has been in our family since the mid 50s. Stored inside for many years. Will start, but hasn’t been driven. Almost all original. New 6 volt battery. Comes with period correct snow plow and mounts. Hydraulic lift. Original rear hitch and newgren 3 point hitch with related parts.some PTO parts, spare parts, and a tow bar. 5000.00
Located in Princeton NJ
1951 Willys Truck
$1,750 Lexington, OK
INFORMATION FROM SELLER:
Have a rat rod project?
Have most parts to make a complete Willy’s pickup
Extra axles, transmission and transfer case
Has a locked up 289 ford motor
$1750.00
for all
REASONABLE OFFERS CONSIDERED
Text @[hidden information]
Located in Slaughterville, Okla
1954 Willys Truck
$1,500 Laurens, SC
1954 Truck, well not really its later then that for a number of reasons, like the trim, fresh air hole in the grill, one piece windshield, my guess is 1960 plus. The small hood ornament kinda leans this towards a classic Willys Salad. The hood patina looks slighty differnt then the rest of the truck.
INFORMATION FROM SELLER:
Willys truck pretty bad shape but pretty much complete with 4 cylinder flathead and running gear ,very rusty
1968 Jeep Super Wagoneer
$3,500 Newcastle, OK
Not sure what a Super Wagoneer is, but I like the patina on this one. Figure would post it up.
INFORMATION FROM SELLER:
1968 Jeep Super Wagoneer. Has Buick 350 V8 with TH400 Trans. Factory console with floor shift. Factory ac in dash. Jeep runs and drives, has all new brakes, carb kit, new tires, fresh powder coated stock wheels. Needs floor pans and lower quarters. Would make an excellent deer wagon or restoration project. Firm on price, no trades.
CJ and Truck Part Out Stonewall, OK
No specific price on this, there is a truck in the background. Some old iron here for sure laying around. Might be some good stuff here. CJ has a fiberglass tub, the truck looks pretty complete from 50′.
INFORMATION FROM SELLER:
Located at d&h auto salvage in stonewall Oklahoma
Selling parts only can ship parts as well
Call or text any time
1940’s-1950’s Willys Jeep CJ2 Parts
$500 Blanchard, OK
INFORMATION FROM SELLER:
Classic lot of Willy’s Jeep CJ2 parts. Has hood, grill, tailgate, wheel wells, rear differentials, leaf springs, gear boxes. These are from the 1940s/1950s era.
Fernando (Nando870) on OWF posted an awesome summary of the 7th Annual National Willys Meeting in Brazil.
Its a really awesome collection of Willys, Jeeps, IKA, and some other stuff mixed in.
A lot of work was put into an Event of this size and quailty.
Too good not to share with everyone.
Head over to OWF and check it out.
Some back story from his post….
The last weekend, April 24-26th 2026 for those reading this in the future, the 7th annual national Willys meeting happened in the city of Forquetinha, RS, Brazil.
Every year the meeting is held in a different town, rotating between the 3 southernmost states in Brazil.
1949 Willys Jeep CJ-3A
$8,000 Norman, OK
Andy’s Picks
CJ-3A restoration with overdrive
INFORMATION FROM SELLER:
1949 CJ3A For Sale!!
Frame up restoration! 80 percent complete! Includes all original body parts, seats, etc. Sandblasted frame. Spent $8000 on New parts and engine overhaul!!
New Installed Overdrive kit!
New starter, alternator, fuel pump, water pump, brakes, brake lines, clutch, U joints, tie rods, shocks, leaf springs, bushings, exhaust system, New aluminum radiator. New gas tank!
No Title.
$8,000 obo
No Trades!
Sold · Willys Jeep Painted Service Sign
$500 Bellwood, PA ***SOLD***
Andy’s Picks
***SOLD*** Willys Jeep Sales and Service Sign
INFORMATION FROM SELLER:
Very nice painted sign, painted both sides. 48″ x 30″ Back side has small chip. This is for a friend not on Facebook. Will not answer “Is it available?” Pick up only out side of Bellwood Pa 16617
It’s coming up quickly, this is a great event, very family friendly, lots of parking which includes trailer parking to get your rig to the show.
I have been able to attend these past two years and it’s one I look forward.
Please check out the CJ3A website or FB for more details.
As always the Willys Picnic, Show and Swap is free. Do not fall for any scams, the Willys Picnic is FREE. There is no preregistration.
Click here for directions to the event http://www.kemptontrain.com/directions/
See the website for any updates http://www.cj3a.info/picnic
The Great Willys Picnic on Facebook
JB Stoltzfus
Sunday>>>
Ran out of room, 20GB was floating around and I filled up the storage actually was 115% above the limit, so cleared that all out, who knew you have to keep track of GB and GB of data and it’s not just infinite. Easy fix, but when I tried to upload the photos for posts today there was no room to do that, so here we are! I kind of knew something was up the uploads were a little slower, but that plugin said they would be impacted on new uploads, but it just all came to a stop last night on the media stuff.
Seems all good, will monitor for now and see how it goes.
We will get there one step at a time.. learning as we go. The nice thing is I was able to log right in and get it cleaned up quickly, I can remember when you would crash your computer and it was not even able to delete files. The host has allowed the overage which is nice, but me not looking did not help matters to keep it in the bounds of the allotment.
Saturday >>>
11:30 EST Update
Got some stuff posted up with the new format, it worked out well, need to get some reps in on this new to me format, but it worked well, may have broken some pictures for past posts, will figure that out as I go I feel I know what that issue is.
Let me know if there are any issues, not required I usually do my own thing, but it may help you out and working at this.
Original Post
Still working on the new post format deal, that whole table deal turned into a rabbit hole, but I got it sorted just takes more time, everything takes longer then expected.
The table format was such a time saver for me, I had it in a vertical set up, but did not realize that issue with the tables in general that did not fit the windows. Thanks to John for pointing that out, it was the same on any phone it turned out just never realized it.
So after 4 full months of doing it that way, used some AI help to build out a new template, which happened to be a great tool in the tool box, and sorting that all out. It’s really amazing how helpful and easy it is to use for stuff I would never (or it would take a ling time) to be able to build a template like that. You can build an entire post generator of sorts, not there yet and that would not take a ton of time but not today.
There was a period of slowness on the site yesterday AM which I don’t know what was up there, but it cleared up and I wound up disabling the WebP plugin, just in case, but it did not seem related to that, so that is back on. I had an email scheduled to the helpdesk but it cleared up so I cancelled the email for that will see if it comes back and will let them know.
Unfortunately all of this eats into the time I have to do posts, so just bear with us, these are just like our Willys at times they run great for months and months and then the don’t and you go down multiple rabbit holes.
Getting there and not getting there all at the same time.
Here is a snapshot of the file:
When I double click that COPY cell, that CELL turns Green, it then says POSTED and the date next to that row it then is just pasted into the WP post. It’s all formatted, the Info to seller is buried into the format with a hidden column, the “Link to Ad” is also created.
This is what it looks like with a single paste into the Text editor. No more tables, but it still uses the table. There are billion of ways to do this, so will keep marching on.
WILLYS PTO
Andy’s Picks
INFORMATION FROM SELLER:
New Old stock original Williys power take off. Koenig Iron Works Model 41 single lever. Fits various WILLYS from ’41 to ’71 with Dana 18 transfer case. I can arrange shipping.
Thanks, Tim