Dean’s working on this Converto Trailer. It’s got hubs with a 5×4.5 bolt pattern. He’s wondering how he might find replacement hubs. Anyone have ideas on what would fit?
Here’s the trailer:
Here are the current hubs:
Dean’s working on this Converto Trailer. It’s got hubs with a 5×4.5 bolt pattern. He’s wondering how he might find replacement hubs. Anyone have ideas on what would fit?
Here’s the trailer:
Here are the current hubs:
UPDATE: Still Available. but expensive.
(This unusual spec sheet compares the M-38A1 with the M-274 and the XM443E1. The M-38A1D image press photo is available currently on eBay.
Seller is looking for $80. It needs some work. Seller will consider an offer. Seller does not want to ship it. These pics are the best documented images I’ve found for this top. Here is the brochure: http://www.ewillys.com/2018/02/17/blue-star-hardtop-half-cab/
View all the information on eBay
“This auction is for an aluminum hard top and door that came with a 1947 Willys CJ2A Jeep that I purchased. (The Jeep is not for sale.) The hard top is incomplete and has a few issues, but this might be handy for someone that has a similar hardtop.
Here’s the bad news. The rear plexiglass is cracked, there are a couple of small cracks in the corners of the aluminum roof panels. I have a drivers side door, but the mating hinge that should be on the roof portion is missing. I do not have a passenger door, but the hinge is on the passenger side of the roof portion. The door is set up to have some sort of window, but it is missing the window.
I’m hoping I’ll find someone out there who could take advantage of these parts. It doesn’t weigh much, but it’s just too big to ship. The buyer will need to pick this up just outside of Buckingham Iowa.”
UPDATE **SOLD** Was on eBay.
Starting bid is $300.
“Up for auction is a pair of NOS Dualmatic locking hubs. They are Chrome and in excellent condition. Comes with instructions and original decal, bolts, and locking clips. Unfortunately I do NOT have the parts catalog so I can NOT ID these by make and model. But I can give you dimensions: 4.375 overall diameter, 3.125 long, 10 internal spline, 3.750 bolt hole pattern center to center. The dualmatic # 80. I am selling these as is as described. Please be sure they are what you’re looking for before bidding. Please email with any questions. High bidder pays$16.50 for S&H.”
UPDATE: **SOLD** for $6100 on eBay
This is a no reserve auction. It has a fun paint job.
“Very nice Jeep Willy’s CJ2A with a strong later Jeep V6 engine with headers. Custom paint job. Transmission and transfer case were recently rebuilt. Original Steel body. New bikini top (can be hemmed for custom fit). Roll cage and bench seat. Always kept inside. Zero rust! Great body out/under and in between. Super sold example! There is a small spot on rear passenger fender that needs painted (black to match other side) but this does not affect the nice paint job at all. Otherwise I know of nothing that it needs. Good tires, brakes and clutch. Very well cared for inside and out. Keep in mind this is a 73 year old vehicle so expect some imperfections. Clear title in hand.”
UPDATE: **SOLD** Was $8500.
A little nitpicky item. The seller notes the tranny was rebuilt, but shows a pic of the transfercase. The drain hole appears filled.


“Jeep for sale. 1947 Willys Jeep CJ2A for sale. $8500. Runs great. Fun to drive. Original Go Devil engine. 134cc, 60 HP. This one has overdrive too. Electrical was updated to 12 volt, new alternator, new hoses, new belt, new battery, new thermostat and coolant replaced. 4 wheel drive works, overdrive works, emergency brake does not work. All the electrical works, like headlights, taillights, lighter, etc. Transmission rebuilt a few years back, looks good as you can see in the picture”
UPDATE: **SOLD** Was on eBay.
Starting bid is $1600. Includes a plow, an extra engine, a CJ-5 chassis, and other parts.
“1965 Willys/Jeep CJ3B Meyer T5 plow setup (with title). Body and interior are rough, but mechanically sound. Good running F134 engine. Owned for 13+ years. Not road worthy, but reliable plow vehicle. Has PowerTrax lockers installed in both axles. Good base for rock-crawler project. Decent tires. Plow package includes spare parts including two working Hy-Low pumps, spare plow frame, cylinder, and original ElectorLift T5 pump. Also included is a CJ5 rolling chassis (no title) with an F134.
This motor has all new guts. Block was machined by NAPA and has .020 pistons, rods, and replacement crankshaft/bearings. Hasn’t even been broken in yet. Regret not painting the dipped block. Just surface rust though. Also included is a extra F134 engine, and a set of a front and rear axles, transmission and transfer case. Lastly, 3 totes, chucked full of various parts. Package deal sold as is. You have to come get it. LaPorte, IN near Toll Road. Prefer PayPal, cash will do. I’m getting old and the lockers make it too hard to steer without power steering. The hillbilly hardtop keeps the snow off, but I’d rather have heat and a cab… “
Seems like a good price.
https://albuquerque.craigslist.org/cto/d/albuquerque-1951-jeep-willys/6882660333.html
“1951 Jeep Willy’s for sale. 4 cylinder, runs good. It has a 8500# winch on the front just in time for hunting or ranch Jeep.”
Has as stuck clutch and some step damage.
https://houston.craigslist.org/cto/d/bay-city-m38-jeep/6878899767.html
“1953 Willy’s M38 Jeep, runs but clutch stuck, con to 12 volt have all 24 volt and old motor”
UPDATE: **SOLD** Was $600.
Appears worth a look.
“Complete 134 L head motor. From fan blade to bell housing and all accessories (starter, generator, rebuilt carburetor, original air filter, etc). Comes with tune up parts, gasket kit. Was a running/driving motor until it was pulled last fall. Stored indoors since then. Call for more details if interested.”