To Top

1950 CJ-3A Santa Maria, CA **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1800.

Needs work.

“I am selling my project 1950 CJ3A. I don’t have time to continue restoring it. I have done some work on it already so it is not far from being drivable.

Rebuilt T90 transmission and Dana 18 transfer case
Good rims and tires
New brake lines and master cylinder
New fuel tank
Engine runs. New plugs and wires.
Includes a new tow bar
clean title”

1950-cj3a-santamaria-ca2 1950-cj3a-santamaria-ca3 1950-cj3a-santamaria-ca4

[fb_button]
 
To Top

1944 GPW Laytonville, CA $4000

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

Doesn’t run.

https://sfbay.craigslist.org/nby/cto/d/jeep-1944-ford-gpw/6656677603.html

“Available to adventure seeker this 1944 Ford jeep. For the casual user, it wouldn’t take much to get this puppy going. For the restorer a good foundation. With what’s there, all appears to be original. Data plate shows DOD of 5-4-44. Ford body, frame are proper. Transmission appears to be a T90. Vehicle is located approx.. 17 miles off HWY 101 near Laytonville CA.”

1944-gpw-mendocinocty-ca2 1944-gpw-mendocinocty-ca3 1944-gpw-mendocinocty-ca4

[fb_button]
 
To Top

Ford Falcon 260 V-8 Adapter and Bellhousing Mesa, AZ

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was no price.

Joe-in-Mesa has this unusual Bellhousing and adapter combination. He’d like to find a good home for it, as he has no plans for installing a 260 Ford into his flat fenders.

“This bell housing is from a 1962 Ford Falcon 260 (V8) motor with 4 speed trans!  I also have the clutch/bearing arm for the bell housing.  That’s the same engine used just 2 years later in the Mustang and even early Cobras J.  The bell housing is marked C2OA-6394 FoMoCo 62-1 (Jan ’62?) and Sheffield.”

20180728_162411

20180728_162511

Continue reading

[fb_button]
 
To Top

1953 Wagon 8×8 Kingman, Az

• CATEGORIES: Features, Unusual, Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: John spotted this video. This 8×8 was last listed on eBay and sold for $11,100. It was relisted in 2014, at which time the video below was posted. I believe this sold, as it is no longer listed on the seller’s website.

(08/11/2012) “Built by legendary fabricator Dick Cook out of California be sure this rig was was put together the correct way! Known for his collaboration on the mechanical side of cars built with legendary 70’s car builder “Big Daddy Ross” his name is synonymous with multi-axle vehicles. This build includes the following:

-2 Overland wagons and 1 Jeep used to build this amazing Overland Custom
-Rebuilt 327 Corvette engine powers ALL 8 Wheels!
-Fuel Cell inside
-2 Leather Bucket Seats
-White face gusges
-Working emaergency sirens and lights

In full disclosure, the items that are not 100% show quality as follows:

-There is a bit of overspray on the drivers side
-The interior could use some TLC to get to show quality

This Willys will literally go anywhere, and it has. Dick Cook personally drove this rig with his daughter from Crested Butte Colorado all the way over the pass to Aspen only a few years ago for a road trip. With the option of locking out the rear 4 wheels this rig will motor down the highway at 65 mph. Also has one of the best turning capabilities of any auto out there. It will “crab” down the road in a parade or 8 wheel steer itself out of any trail corner. Bid now and be the owner of this one of a kind WIllys 8X8 Overland before it makes its way to Barrett Jackson Las Vegas and goes for who know how much!”

[fb_button]
 
To Top

1964 Gladiator Truck Gorst, WA $2500

• CATEGORIES: Other 4x4s This site contains affiliate links for which I may be compensated.

Rick spotted this one. Could be a good price.

https://seattle.craigslist.org/kit/cto/d/1964-jeep-j200-gladiator/6656657965.html

“Here is a stock, unmolested survivor pickup. It is very straight and mostly rust free. Very solid, was used on a farm so only bad part is the tailgate is rough. It has 230 tornado that runs good and t90 3 on the tree transmission. Nothing has been modified, including hubs. It has 4.27 gears and does hi way speed easily. Glass is all good, doors are tight. It has sat at times but I drive it once a month , 30 miles round trip to my daughters. You will not find a better candidate for restoration or just drive. I have extra parts from a j3000 I was going to install, but decided to keep it stock. complete set up for power steering, door mechanisms, and some other parts. It also has stock wheels and hub caps in the bed. Yes you can drive it home, it has collector plate. $2500 or possible trade.”

1964-gladiator-seattle-wa1

1964-gladiator-seattle-wa2 1964-gladiator-seattle-wa3 1964-gladiator-seattle-wa4

[fb_button]
 
To Top

1944 GPW Bay Area, CA $3500

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

It appears this is a WWII chassis and front clip (fenders/grille/hood) with a CJ-2A or CJ-3A body. In addition, the steps on the body have been modified and the drain holes on the sides have been filled. The rear of the body appears to be filled in. The windshield is aftermarket or from an M-38. The front and rear bumpers have been modified. Contact lindsey for more info: 831.227.8497

“This is from a family estate, we are in the Bay Area California and prefer a local buyer. Price is firm due to estate parameters. Thanks for taking a look!

“3500 USD
1944 Ford GPW
fuel: gas
title status: clean
transmission: manual
-Up for sale is a 1944 Ford GPW Jeep.
-Needs a lot of work. Project vehicle.
-Was inherited from family member who passed away. While he was able to start and drive it, unsure if we can.
-Currently on non-op status with DMV
-Pink slip in hand”

1944-gpw-bayarea1

1944-gpw-bayarea2

1944-gpw-bayarea3

1944-gpw-bayarea4

1944-gpw-bayarea5

[fb_button]
 
To Top

1945? MB/CJ Boise, ID $2800

• CATEGORIES: CJ-2A, CJ-3A, MB This site contains affiliate links for which I may be compensated.

I suspect there’s an MB/GPW body under that diamond plate. Maybe even a chassis, too. Note the rear shock absorber.

https://boise.craigslist.org/cto/d/1940s-jeep/6655411227.html

“1940’s Jeep for sale. 350 V8 . Needs little carb work and steering pinion replaced. Engine runs strong. Fun project Jeep Come see! New battery.”

year-mb-cj-boise-id1 year-mb-cj-boise-id2 year-mb-cj-boise-id3 year-mb-cj-boise-id4

[fb_button]