emailNeed to contact me and don't have my email? Click on email button.
About eWillys
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
“I HAVE A WILLYS CJ2A PROJECT THAT WAS TORN DOWN 15 YEARS AGO TO GET UPDATED THEN THE OWNER LOST INTEREST.
THE BODY COULD USE A LITTLE WORK FLOORS ARE SOLID BUT THE PASSENGER SIDE PANEL COULD USE SOME WORK TO MAKE IT NICER BUT IS USEABLE AS IS. IT CURRENTLY HAS A 1972 FORD 2.0 ENGINE WITH A WEBER CARB THAT SHOULD RUN WITH A BIT OF WORK. THE TRANSMISSION IS A HEAVY DUTY T-18 WITH A DANA 18 TRANSFERCASE ON THE BACKSIDE. 33 INCH TIRES, 4 INCH LIFT, ORIGINAL AXLES AND BRAKES, REAR FUEL TANK, SAGINAW POWER STEERING SET-UP, CUSTOM SKID PLATE UNDER TRANS/TRANSFER, NICE BUMPERS, TOW BAR, SIX POINT ROLL BAR IS INCLUDED BUT NOT INSTALLED. WHAT YOU SEE IS ALL I HAVE FOR IT. ASSEMBLE IT OR USE IT FOR PARTS. $1000.00 OBO
POSSIBLE TRADE FOR A NICE WELDER OR OTHER JEEP PARTS / PROJECT / VINTAGE SIGNS”
Terry’s got some parts for sale that came on a CJ-2A.
“Willys CJ2A, M38, CJ3A Jeep parts for sale
Willys Jeep parts for sale. Parting out unfinished project. These are asking prices, not including shipping. Make your best offer. The more you buy, the better the price. E-mail me with interest and I’ll send you a link to a complete photo album. Payment by Paypal or check prior to shipping.
CJ2A frame in great condition, solid and straight. It will be a long time before you find a frame this nice in the Midwest. Includes transmission crossmember, skid plate, draw bar, new battery tray, rear frame end plate, and rear crossmember, (installed). PO installed new rear crossmember and “bumperetts” which are easily returned to OEM. $900.
Include new, heavy duty, (thicker) front bumper add $85.
Complete 134 Go-Devil engine, # J-66851. Includes, carb, starter, fuel pump, distributor, fan, intake tubing and clutch/pressure plate. Started easily. Idles nice. Carb responded well. Confirmed fuel pump operative. Oil pressure over 40 psi. Only ran for several minutes without coolant. Video available. $1250
New M38 tailgate and used spare tire carrier, $220
Used CJ2A radiator with shroud, $82.50
5 gallon “Jerry” can, $12.50
Used clutch/brake levers and pedals, $45
New CJ2A windshield frame with inner frame-No “WILLYS” logo $400
Used Dana “18” transfer case with E-brake assembly, 1 1/8″ shaft with overhaul kit, $180
Used T90 transmission, $55
Used military antenna and power supply?, $35
Used military turn signal switch assembly, (ea), $35, (both) $60
Used TRICO vacuum wiper motor, unknown application, (both), $17.50
Used drive shafts, front and rear, (ea), $160
New “Master” brake service kit-9″, includes shoes, wheel and master cylinders, hoses and mounting hardware. $150
New, differential gaskets and oil filter, $12.50
Used misc hardware, includes trans and MC covers, windshield latches, seat and windshield pivots, accelerator pedal, etc, $45
New heavy duty, (thicker), front bumper, $95
Used passenger seat, (frame), $71.50
Used oil bath air cleaner with brackets, $82.5
Used OEM instruments, OP, AMPS, TEMP, (stuck @ 140), FUEL and switches, $27.50
Used tool box lid, $17.50
Used Hood, solid but lead edge is bent, $100
Used grill assembly, (I’d like to keep it), $275
Wheels, 16″x 4.5″, (ea), $45, (all), $140
Rear axle assembly, $110
Front axle assembly, (looks like some new tie rod ends), unknown joint type-tags are gone, knuckle seal surfaces are good, with SEARS/ALLSTATE locking hubs, $220
Used OEM, bevel edge springs and hardware. Rebuild able or use to rebuild another set, $55
Used “DUALMATIC” locking hubs. $125
Used “SEARS/ALLSTATE” locking hubs, $55″
“World War II Army Jeep 1943. Was California vehicle. Single owner since 1979…Very Good condition. Ready for Jeepin’ or Full Restoration. Door County, Wisconsin.”
I really like this one. I think it could make a good project jeep. Looks like it has the white pointer 0-9 speedo. I just happen to have a NOS one of those …
“Neat project for somebody. Old CJ-5 was used in an orchard for years, so it has dings and dents. Missing passenger seat and windshield frame, has NOT run in years but it turns over fine. Pretty rare to find a Jeep project this old with original paint and all five original wheels. Still has the F head 4 cyl. and the floors & tub seem very solid.”
“1961 Jeep FC-150, VIN: 6554822024. Last driven in 2002, Been stored inside since. Last started Feb 15, 2017. Ran for less than one minute, needs some wiring replaced prior to starting again. Radiator needs replaced. Original parts manual included. Some rust on cab corners, rest of vehicle and frame appears in good shape. This will make an easy restoration project for any vehicle enthusiast. Selling because I have too many projects to complete.”
“For Sale 1953 CJ3A Willys Jeep-runs good,solid body,looks military but is not. 4cylinder 3 speed manual 4 wheel drive plus high/low. Firm price $4,500.00”
(01/16/2017) Steve’s got this 2A with a rear PTO and governor for sale.
“1948 Willys cj 2a farm Jeep. Powered by a Flathead 4 cylinder engine. Jeep runs and drives but needs brake work. Body in repairable condition. Running off a 1 gallon gas can that goes with the Willys. Has a Novi Governor (Not on engine) and a rear power take off to run farm equipment. PTO does work as well as the 4wd. Not interested in any trades. $3500.00 obo. Jeep will fit on a 6 1/2 x 12 landscape trailer. Clear Title in my name.”
Looks like it would take more than $2500 to make it original.
“:Great jeep with just about perfect body
:Runs good to drive around Town
:Needs about $2500 worth of work to bring it back to original
:Comes with original rims but the tires are no good
:Seats are not original. Original seats are metal so these are more comfortable to sit on
:Paint job not original
:Carburater not original
:Steering wheel not original
:If you have the time and want to restore it back, this Jeep could be worth $12,000 or more
:If your like me and just want to drive it around for fun it’s a classic cool jeep from WWII
I can bring the Jeep to my house in Tarzana if you want to have a look and not drive out to Pomona”
“i have a willys jeep that starts and runs. carb is off at this time. been stored in the garage since i had it. i have the title for it. i have other parts that are for the willys or gpw that i will be selling separately. i will get better pictures in a few days. it has the original 4 cylinder in it with the T84 Transmission. i have drove it before but been sitting for the last few years.”
