To Top

1948 Jeepster Inland Empire, CA $4800

May 31, 2017 • CATEGORIES: Jeepster This site contains affiliate links for which I may be compensated.
0

Body has been media blasted and primed.

“1948 Willys Jeepster. Rust free and very straight body which has been plastic media blasted and primed at the cost of $2700. All the interior has been done in a modern pattern/materials. The plan was to make it a driver with a 225 Buick V6 and turbo 350 which have both been completely rebuilt and included as well. The frame has not been modified yet so if you wanted to go back to the original drive train you could very easily. The original engine and trans are gone and not included. Some of the plating and polishing of the stainless has been done as well. Lots of extra parts included. A lot of time and money were spent on the project unfortunately there wasn’t enough time left to finish it. It’s a great start for someone wanting a project. Due to the location in the garage pictures are not the best.”

https://inlandempire.craigslist.org/cto/6151427155.html

1948-jeepster-inland-empire-ca

[fb_button]
 
To Top

1947 CJ-2A Montague, OR **SOLD**

May 31, 2017 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
2

UPDATE: **SOLD** Was $2800.

(05/20/2017) Runs. Appears worth a look.

“Selling my 47 Willys cj2a it’s in good condition runs and drives but is still a project still has the go devil 4 cylinder engine it’s easy to work on and worth putting money into I’ve had a good time with this jeep but no longer have a place to store it so it’s sitting in storage rotting away and it didn’t deserve it so help her back onto the road”

1947-cj2a-montague-or1 1947-cj2a-montague-or2 1947-cj2a-montague-or3 1947-cj2a-montague-or4

[fb_button]
 
To Top

1946 CJ-2A Forest Grove, OR $400

May 31, 2017 • CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.
0

Appears to have parts value.

“o title, has a decent amount of rust, axles and transfer case are complete, was set up for a ford 4 cylinder, parts motor included, the hood is there but no windshield. 3 large pieces of sheet metal are included for patching. Needs a lot of work $400. phone calls only no texting or emails. No trades and I will not deliver it”

https://portland.craigslist.org/wsc/cto/6153389044.html

1946-cj2a-forestgrove-or1 1946-cj2a-forestgrove-or2

[fb_button]
 
To Top

1949 Wagon Springville, AL $1000

May 31, 2017 • CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.
0

Barry spotted this one. I’m not sure how much value is there.

“WILLYS PANEL DELIVERY TRUCK 1949. THIS IS FOR THE BODY ONLY, THERE IS NO MOTOR OR TRANSMISSION. WILL NEED FLOOR PANS, AND MISCELLANEOUS OTHER REPAIRS. STILL SOLID ENOUGH FOR A GOOD PROJECT. ”

https://bham.craigslist.org/cto/6146490152.html

1949-wagon-springville-al1 1949-wagon-springville-al2 1949-wagon-springville-al3 1949-wagon-springville-al4

[fb_button]
 
To Top

FC-Dually Rear End Anson, ME **SOLD**

May 31, 2017 • CATEGORIES: Parts • TAGS: . This site contains affiliate links for which I may be compensated.
1

UPDATE: **SOLD** Was $800.

(05/09/2017) This looks like a deal.

“Matching set of Willys duel rear wheel axles (posi trac) off of Factory rack body Willys F.C. 170. This is probably the last set of these that you will find. I also have many other Willys parts for wagons, pickups, jeepsters, J-Series, C.J’s, Etc. Etc”

fc170-duallies-me

[fb_button]
 
To Top

Wood Hardtop Redding, CA **SOLD**

May 30, 2017 • CATEGORIES: Features, Parts, Unusual, Wood bodies • TAGS: . This site contains affiliate links for which I may be compensated.
5

UPDATE **SOLD** Was $125.

Bill spotted this wood hardtop. The side windows flip down. Looks well-built.

“CUSTOM MADE WOOD (W/ CANVAS) WILLY’S JEEP TOP/COVER NEEDS SOME REPAIR FOR RETROFITTING YOUR VINTAGE JEEP! ATTENTION SURFERS ! AND DEER HUNTERS !!!”

cj2a-top-wood-redding-ca1 cj2a-top-wood-redding-ca2 cj2a-top-wood-redding-ca3 cj2a-hardtop-wood-redding-ca4

[fb_button]
 
To Top

Good Day

May 30, 2017 • CATEGORIES: Features • TAGS: . This site contains affiliate links for which I may be compensated.
9

2017-05-29-patterson
We had a good day of work on Patterson today. First up, we confirmed that all the lights, blinkers, and even the hazards work. The brake lights don’t work yet, but that’s related to the master cylinder. I’ve ordered a dual master cylinder system from R&P, which ought to solve the brake issues.

The last electronic issue to debug is the heater motor. That’s on deck for tomorrow morning.

We took a look a closer look at Patterson’s engine and concluded it needs a full rebuild. There are multiple areas of pitting on the piston walls. Examples:

2017-05-29-patterson-piston-wall2

Wall of piston #4. Several instances of pitting.

2017-05-29-patterson-piston-wall1

Pitting on #2

So, we turned our attention to Rusty’s engine, one that is marked as a rebuild. Ann tackled the cleaning of it. It was supposed to be a “good enough” job, which she surpassed.

2017-05-29-ann-cleaning-block Continue reading →

[fb_button]