To Top

1962 FC-170 w/Dump Bed Austin, TX **SOLD**

• CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $8000.

Tom’s got this FC with a Dump bed for sale.

“1962 FC170 Mostly original paint/patina red/white. All drivetrain components serviced and in good running condition. Trans is T98 4-speed. Engine and trans were rebuilt in the last 10 years. Truck has 60’s era hydraulic dump bed. This truck is from Illinois and has some rust issues. I have been driving it and using it as is and it is a lot fun. I have a upper cab section that includes the roof, rear window sections and A-pillars that could be used if you wanted to restore the truck. I also have an extra set of doors. $8k”

1962-fc170-austin-tex1 1962-fc170-austin-tex2 1962-fc170-austin-tex3 1962-fc170-austin-tex4

[fb_button]
 
To Top

1946 CJ-2A Cranbury, NJ eBay

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

Russell shared this link.

“This is a 1946 CJ2A Serial Number 48768 that is in original barn find condition. It has the hard to find governor and rear PTO setup for a farm jeep. It has many original part and has the original motor in it. It does not run, the motor does not turn over and the transmission and transfer case seem to be stuck as well. It is a great candidate for a restoration or just repair what’s needed and drive it. The front floors are the worst of the sheet metal, the rear quarter near the spare tire mount will need some work as well and the windshield is shot.”

View all the information on eBay

1946-cj2a-cranbury-nj9

[fb_button]
 
To Top

1955 Truck Ashland City, TN **SOLD**

• CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $10,500.

(0225/2017) Has an updated engine and tranny.

“We have a really nice old willy’s truck. It has been painted hot rod black and is 4wd. It has had motor and trans from 85 jeep rebuilt and installed in it. Bowman’s Auto Sales”

1955-truck-ashlandcity-tn1

1955-truck-ashlandcity-tn2 1955-truck-ashlandcity-tn3 1955-truck-ashlandcity-tn4

[fb_button]
 
To Top

1950 CJ-3A Bozeman, MT **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3900.

(03/13/2017) Likely needs new tires.

“1950 CJ3A Willys Jeep
Rebuilt in the 80’s and modified with a Ford 289 engine.
Engine runs well, but could use a carb rebuild. 120 average compression; 49-50 psi oil pressure.
The rest of the drivetrain was rebuilt, but is original.
No noises from axles, transmission, and transfer case. All function fine. Four wheel drive is perfect.
Clutch works fine, brakes work but could use attention on the front passenger side.
Tires will leak air after a few days.
6782 miles since rebuilt, always stored inside.
Speedometer, oil pressure, fuel, amps and temp gauges all work.
Paint was never perfect, and there is some small rust staring to show.
Very fun Jeep!”

1950-cj3a-bozeman-mt6 1950-cj3a-bozeman-mt7 1950-cj3a-bozeman-mt8 1950-cj3a-bozeman-mt9

[fb_button]
 
To Top

1946 CJ-2A Bound Brook, NJ $1700

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

The floor will need work for sure.

“I’m selling my 1946 jeer willys project. I have done a lot of work but like has other plans for me, so I’m selling it.
I have a title for it, which is a big plus especially in Nj.
I have replaced the floors, hat channels, rear riser, steps, side braces, etc. please look at the pics. The left side of the body still needs some welding.
4 rims were sand blasted, primed and painted with automotive paint. 2 tires have new ndt tires mounted and I have one more tire and tube that needs to be mounted.
The engine was running before I disconnected everything in order to pull the body off. I also have 2 extra radiators and I have an extra working transmission because I’m not sure of the condition of the trans that’s in there.

I also have 2 extra bell housings and 2 flywheels, 2 extra engine heads, transmission mount, and lots of other parts that I’ve accumulated over the past few years including a rear seat, steering wheel, and many more parts.”

https://cnj.craigslist.org/cto/6070400113.html

1946-cj2a-boundbrook-nj1 1946-cj2a-boundbrook-nj2

[fb_button]
 
To Top

1953 CJ-3A Ball Ground, GA $1400

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

It’s a project.

“I have a CJ3a Willys Jeep for sale. I believe it is a 1953 model, but am not sure. I purchased it to restore, but never did. The Jeep is not running and is not complete. It’s missing a hood, gas tank, seat brackets, and miscellaneous other items. The body is not in great shape, but the frame appears to be in really good condition. I also have a spare motor (flathead), transmission, transfer case, and front and rear axles. The front axle need a chunk but the rear axle works. I have another frame as well. It’s basically two rolling chassis with one body. Also, I have a Ford 302 motor included. Will sell the Ford 302 separately, but prefer to keep the Jeep parts together. Cash only. No title or VIN due to age of vehicle, bill of sale only.”

https://atlanta.craigslist.org/nat/cto/6076199008.html

1953-cj3a-ballground-ga1

1953-cj3a-ballground-ga2

1953-cj3a-ballground-ga3

1953-cj3a-ballground-ga4

[fb_button]