UPDATE: Still Available.
(10/29/2016) No pics provided.
“1949 willeys cj2a project nice body frame is very solid good soft top needs to be finished up ran good when parked to many projects bill of sale”
UPDATE: Still Available.
(10/29/2016) No pics provided.
“1949 willeys cj2a project nice body frame is very solid good soft top needs to be finished up ran good when parked to many projects bill of sale”
UPDATE: Still Available.
(11/4/2016) Lots of updates.
“1954 Willys cj3b. 1994 4.3 liter V6 balanced blueprinted heads shaved .040 10 and 3/4 to 1 compression. Elderbrock intake elderbrock 550 CFM carb. The Wellhead is from advance adapters. Turbo 350 Transmission built byB&M. Dana 30 front axle Dana 44 rear axle out of a 72 Jeep Commando. 2 1/2 inch soft ride suspension lift Dana 20 transfer case custom drive shafts. Power steering tilt steering wheel leather seats best top soft top B&M slap shifter 33 1250 Super Swampers on 15 inch rim and much more.”
UPDATE: **SOLD** Was $1500.
(10/25/2016) Needs plenty of work.
“Up for sale is a very rare jeep pickup truck.
It’s a 1961 jeep Fc 170.
They only made 30k of these in the few years they were produced.
This one does need a lot of work to the body to be road worthy but they are extremely hard to find.
This has a flathead 6 in it and a 3 speed transmission. The front axle is a Dana 44 and the rear is a Dana 53. ”
UPDATE: **SOLD** Was on eBay.
Josh has listed this crankshaft pulley, a part used to power some early Ramsey winches. This video tells more about Ramsey’s crankshaft driven winches:
“You are bidding on a nearly impossible to find positive crank shaft driven winch/pto CLUTCH PULLEY. I believe this example was manufactured by Ramsey and is the key piece for a number of winches used on vintage jeeps.
The assembly appears in good shape and complete but could provably use good cleaning and some refreshing. The pulley unit is the only piece I have.”
This may be worth a look.
“1983 Jeep Scrambler 4.2L motor with 47,xxx original miles, T4 trans, 300 transfer case. Dana 30 front, amc 20 rear wide track axles with 4.88 gears. Rear has spider gears welded. 33″ tires. Small lift. New fuel lines, brake lines, lots of new parts. Bikini top. Hard doors and tailgate available but rough. ”
UPDATE: Price dropped to $2000.
(06/22/2015) This has been bought and sold a couple times. A hood bump has been added since the last sale.
“Willys jeep for sale lots of new parts. Needs timing and new brakes bled. And old gas in tank. Has hydraulic pump for snow plow blade. Has new distributor and carb and hasn’t been timed”
UPDATE: **SOLD** Was $1900.
Nick’s selling this running CJ-2A.
“For sale is a 1946 Willys CJ2A Jeep. This is a great running and driving Jeep for cruising through the trails. I’ve done a ton of work to this vehicle as highlighted below:
-Installed correct engine
-Installed verified good clutch, pressure plate, throwout bearing, clutch fork
-New battery
-New wiring
-Steering box install and new gasket
-Good rims and tires
-Oil change
-Correct GL-1 tranny oil
-New fuel pump & lines
Continue reading
UPDATE: **SOLD** Was $5700
(10/16/2016) This M170 has had the large opening partially filled. It also has a Meyer half top. I’m not sure why the seller has included a photo of an FC, but maybe it is for sale?
“M170 Military Jeep in good overall shape for the year! These are getting harder to find and it runs drives and stops. Plow is working”
Uhm.
“1948 Willy’s Jeep. Completely restored. Blue in color. Not actual miles because it has a new engine. 1989 Engine 4 wheel automatic drive. V6 4.3 Engine. Local buyers only. No shipping this vehicle.”
UPDATE: **SOLD** Was no price.
No title. Seller must get off property.
“This is a 1947 Willies CJ Jeep. As the picture show, it is in very poor shape and is in pieces. As far as I can tell most of it is there except for seats. I have no idea as to worth. It may be better for parts. I have not title. I need to get it off the property soon. Make me a reasonable offer and you can have it. Call me for location/directions to the property.”