emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD** Was $3900.
This includes a hardtop.
“1961 Jeep CJ6, 4×4, Huricane eng, new breaks and brake lines, new fuel tank, has a removable hard cab with door and Windows that roll down. Roll bar and new bikini top(never unfolded).”
UPDATE: **SOLD** Was $4500.
Looks like a militarized CJ-3A.
“1952 Willys CJ jeep. Needs some TLC. Has been driven a little since I’ve had it. Not easy to start and the brakes need work. It was used for reenacting right before we bought it. Garaged. No rust. Have title and key.”
Restored to original style? Not quite. Looks solid.
“Here we have a 1946 Willy’s Jeep! Its been restored to its original style. 4 cylinders, 4×4 manual transmisson. This Jeep is in good condition, however please remember this is a collectible used vehicle. Willys is truly a classic, famous for its military repertoire, and for being a major part in the WWII era.”
http://losangeles.craigslist.org/sgv/clt/5391410806.html
It’s rough, but runs.
“Runs and drives. I just went through the brakes (new master cylinder, wheel cylinders, break lines, and shoes. It has a 307 sb chevy, crane roller rockers, Edelbrock intake, carter afb carb, 3 speed original trans, original twin stick t-case, she is ruff, but with some love could be a cool rig. Or leave her as a rat. I have the hood, spare fender and a set of new warn hubs that go with it. 4×4 works good, front axle has a Lincoln locker, rear has some sort of limited slip. She is a handful! Not for the faint of heart. I don’t have the pink slip, BOS only. She is out of DMV’s system. I’m up for trade/partial trade, dana 60 front axles(SRW), bbc/sbc blower parts (671-871), drag boat parts(whirl-away for casale) v-drive stuff, side by side (utv) nv4500,5600 trans, Harley basket case ( no sportsters), etc”
http://chico.craigslist.org/cto/5389985525.html
UPDATE: No longer for sale.
Joe spotted this Crosley (don’t know the model) for sale in Winslow, Arizona. It looks like it’s restorable to me, but I don’t know a ton about them.
UPDATE: **SOLD** Was $7000.
Plenty has been done, but lots left. Runs and drives.
“Truck that I have spent 2 yrs updpdating the drive train. Its totally roadworthy. Only 20 miles on motor Chevy 350 with Comp RV cam with TH 350 tranny and NP 205 Transfer case all newly rebuilt. Dana 44 up front Ford 9 in in the rear. Front has new tie rods rotors bearings and hubs and outer stub axles as well as new brake pads Rear has all new brake shoes all the bearing were checked but didnt need replacing. All new power brakes and power steering. New Red Head steering gear and Borgeson steering shaft. Seats are out of 07 Tacoma. New Skyjacker shocks and a new plastic 15 gallon gastank and all of the lines. New Painless wiring. I built this to take some abuse. Still needs speedo and seat belts and wiper motor. Pedals are all 70s chevy. Chevy tilt steering wheel also. Floor did have rusted out areas that i replaced and I bedlinered the floor. There are some rust spots on driver door and bed area. Drivers door does need some work but passenger is good to go. Has 12k of new parts Price is OBO Cash only. Open to trades”
Here are a couple Hobart welders with jeep engines on each coast. Both operate.
1. Hobart Welder, Fruitland, Idaho $750.
“Older Hobart Portable welder/generator, 250 amp, 40 volt, 60% duty cycle. Powered by a Willy’s Industrial 4 cylinder motor. Has one 110 outlet on the front panel. It has been started, runs well and will strike an arc and weld. Currently missing the battery and ground clamp, welding cables are weathered.”
2. Hobart Welder, Haverhill, MA $600.
“Hobart “tow-behind” welding machine with bottle racks.
4 cylinder WILLYS flathead runs great. Armature has a shot and only provides a scratch-arc”
Very rough.
“1952 , clean title, last registered and inspected in 1987, complete drivetrain, frame looks to be in good condition, needs new body
1000 or
Best offer takes it”
http://chautauqua.craigslist.org/cto/5390291741.html
Here’s a neat 3B hood.
“Brand new, never installed after market hood for Willys jeep high hood CJ3B”
http://seattle.craigslist.org/sno/pts/5392705680.html
No pics provided.
“Jeep is currently in need of the body being put back on. Tore the body off to fix frame horns and clean up the frame. When I tore it down it ran like a top and was on the road. The only things wrong at the time were a very small leak on the side of the brake cylinder which I think was just a loose line being that all the lines are new, the line couldn’t be tightened with the body on so I did it when I took it off and haven’t tested it yet. I have the original steel body that is ok but needs work and a fiberglass body that can be run the way it is buy could use some freshening. It comes with many extra parts and all of the stuff you will need to put it back together. Don’t really want to get rid of it but could use the room in the garage.”
http://albany.craigslist.org/for/5391404648.html