To Top

1948 CJ-2A Memphis, TN $7000

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

It needs some work.

https://www.facebook.com/marketplace/item/1297903827715962

“I have 1948 Willy’s jeep for sale or trade it’s a project but the engine turns over starts on starting fluid . Needs a new gas tank and a new battery that’s all that I know that is wrong with it . Was garage kept for 15 years has been in my driveway under 2 covers for 3 months . Have clean title with the jeep . Wanting to trade for a model t or model A project or something similar and needs very little work like mine”

1948-cj2a-memphis-ten6 1948-cj2a-memphis-ten7 1948-cj2a-memphis-ten8 1948-cj2a-memphis-ten9

[fb_button]
 
To Top

1947 CJ-2A Niles, MI $4100

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(10/07/2020) Jeep has no title.

https://www.facebook.com/marketplace/item/901731217870517

“1947 Jeep Willys CJ-2A. No title. Runs great, CLUTCH NEEDS ATTENTION, Stops good. All gauges work. 4×4 works. Shifts great. Reverse works great. Has new brake lines and brake shoes replaced. Tires are new. Comes with a spare tire and rim. Come get it! Interested in partial trades. 4400 obo will provide a bill of sale will be provided. Fires right up”

1946-cj2a-niles-mi1 1946-cj2a-niles-mi2 1946-cj2a-niles-mi3 1946-cj2a-niles-mi4

[fb_button]
 
To Top

1946? CJ-2A Charlotte, NC $4000

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

The body has some unusual mods. Lacks a title.

https://www.facebook.com/marketplace/item/560786232528963

“This is a project jeep to finish has all original parts 4cyl motor runs great but has weak cylinder in back of motor it takes little to get driving up to speed but it runs good new water pump,distributor,coil,battery,carburetor,plugs,wire’s,fuel pump,3speed manual transmission shifts good,lock hubs up front,4wheel drive differential transmission good so jeep needs to be finished lights work some.the only thing you need to do is when ready to get tittle bonded in your name”

1946-cj2a-charlotte-nc-96 1946-cj2a-charlotte-nc-97 1946-cj2a-charlotte-nc-98 1946-cj2a-charlotte-nc-99

[fb_button]
 
To Top

Happy New Year 2023 Edition

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

Happy New Year 2023!

Normally I write a large rehash of the previous year, then provide previews for the coming one. However, jeep-wise I didn’t do a whole lot in 2022, other than post to eWillys every other day or so. I expect the posting trend to continue, that of new content every other day or so. What I really need to do is downsize my server (it’s $100/month), and move as much good content to a place where it can be preserved (though I am not sure where that will be).  But, I don’t expect to tackle that task anytime soon.

For the most part, our winter and spring 2023, will mostly involve us staying around our place. With the new lighting (see below), I should be ready by early next week to begin work on the racer again. We also have one quick trip planned for 2023, a jaunt to the Southwest, to hopefully pick up a new jeep (we still need to test drive it). Assuming everything goes as planned, I know you all will be excited to see what we get.

In other news, one thing I’ve been wanted to do since we bought this place is replace the dying fluorescent lights in the shop with LED lights. Well, yesterday I began that process.

I was going to rent a lift to do it, but then I realized I could use my tracier+fork lifts with a tall aluminum ladder to reach the lights. You may notice that the ladder is strapped to the forks, which made it feel very secure (the garage floor is sealed and kind of slick as a result, so securing the ladder was important). The whole setup worked really well and was simple to reposition.

2022-12-31-replacing-lights-shop1

2022-12-31-replacing-lights-shop2

I elected to go with the LED replacements that removed the ballast and required rewiring, but in the end I felt they would be the simplest (no more ballast) to maintain. To complete the replacement, besides the lights, I also had to buy replacement holders. So, I swapped out the old holders, wired up the new ones, and inserted them where the old ones were.

For bulbs, I went with stock# PLTS-11961 from https://www.1000bulbs.com
5400 Lumens – 42 Watt – 4000 Kelvin – 8 ft. LED T8 Tube Lamp – Type B
And for new holders I went with these from Amazon: https://www.amazon.com/gp/product/B06XT7ZJLV

[fb_button]
 
To Top

A Video of Nate’s Tracked CJ-5

• CATEGORIES: Features, videos This site contains affiliate links for which I may be compensated.

Nate shared a CJ-5 he put together for his tracks (he said it was a pain to remove them from his other jeep, so he has a jeep that will remain tracked. It sure looks like it works well!

[fb_button]
 
To Top

Gevarm Frence Jeep Model on eBay

• CATEGORIES: Features, toys This site contains affiliate links for which I may be compensated.

Roger Martin shared this French jeep with a Gevarm mark on its underside. I haven’t seen another one of these. Given the box shows the jeep 1) in olive drab, 2) with a trailer, and 3) with armaments, I am wondering if this jeep should have those extras and be painted olive drab?

View all the information on eBay

“A STUNNING FJ FRANCE JOUETS MADE IN FRANCE DIECAST METAL WILLYS JEEP IN FIRE DEPT. LIVERY – “POMPIERS”.

VERY RARE IN MINT CONDITION IN GOOD ORIGINAL BOX – JUST BEAUTIFUL –

FROM THE 1960’S – EXTREMELY RARE – TRY AND FIND ANOTHER ONE IN THE WORLD LIKE THIS!”

french-model-jeep-gevarm0 french-model-jeep-gevarm1 french-model-jeep-gevarm2 french-model-jeep-gevarm3 french-model-jeep-gevarm4

[fb_button]