To Top

Nate Completes Another Build

• CATEGORIES: Builds, Features • TAGS: This site contains affiliate links for which I may be compensated.

Readers will remember that at age 17, Nate finished his first flat fender build, a 1953 CJ-3A.  Not content to spend 2011 driving his jeep, Nate emailed me today sharing with me that he spent the past year building a second jeep with a custom suspension.  He’s been sharing his project with the folks over at earlycj5 site and has a variety of pictures that show build from start to finish.  Well done again Nate! (Some readers might also remember Nate’s ideas)

I only posted one pic below.  Here are all the pictures:  http://www.earlycj5.com/forums/showthread.php?88481-Building-a-new-and-improved-Jalopy-frame

[fb_button]
 
To Top

1946 VEC CJ-2A Ft. Benning, Ga $3500

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

Serial number 15777.

“Up for grabs is my 1946 Willys CJ2A. Serial Number 15777. This is one of the few three on the tree Column Shift models that was made. All of the major components are original and the serial number on the frame and tub match. The only modifications that have been made are the aftermarket oil filter, fuel pump, 12V alternator, and the front brake drums were changed to Ford 9″ using a conversion kit. This Willys runs and drives. I just installed a new fuel tank and I recently had the floor boards replaced. There are a few things that need to be addressed. The rear drive shaft is removed right now; the speedometer cable needs to be replaced. One front headlight and bezel need to be replaced. 713-252-7864”

http://columbusga.craigslist.org/cto/2650458772.html

[fb_button]
 
To Top

1940s Ford GTB Chino Valley, AZ **SOLD**

• CATEGORIES: Other 4x4s This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500.

This runs and drives.

“Got a Ford GTB “Burma Jeep” / Bomb Truck. No title, runs drives around the yard, winch works, four wheel drive works. Original drive line as far as I can tell. No gas tank, no bed, no seats, Transfer case linkage is really, really stiff. I disconnected it to test the 4X4. Needs way more TLC than I can give it at this time. Would consider trades on firearms or a Willys CJ3B project with a good body, even if I have to give you money.”

[fb_button]
 
To Top

1948 CJ-2A Marquette, NE **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500

It runs.

“48 jeep willys flatfender river jeep no rust but for little on underneath braces, wavy body but solid, needs a home out of the weather. original 4cylinder engine runs but needs coil or something but i forget. very tough jeep.”

[fb_button]
 
To Top

1953 CJ-3B Mt. Juliet, TN **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1000

The seller says the floor pans are solid.

“I have a 53 willyz jeep I rescued. I don’t have time for it. I have a son on the way and four other projects. It had a 134 c.u. 4 cylinder. Not running. But turns over. The started is locked up. Need a new one. It’s been converted to 12,volt. I have both doors. All the glass is in it. Has high low 4 speed mamanual transmission. Floor pans are solid. I’m asking 1000. Obo no title. It is a tn registered truck. Feel free to call or text.”

 

[fb_button]