To Top

1999 ‘M-151A2 Encore’ Pompano Beach, Fl **SOLD**

• CATEGORIES: M-151 • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Was $11,500.  **SOLD**

Bill pointed out that this is actually a M-151A2 Encore.  These were built  using the M-151A2 running gear for a couple years in the late 90s.  You can read more about them at the G503.com siteHere are good pics of another EncoreHere’s the discussion of the body at the G838.org site.  I tried to find more info on the history of Encore, but didn’t have success, though it went out of business around 1999.

Greg pointed out this unusual M-151. It’s not clear to me if this was built from scratch or rebuilt, but it sure looks like a pretty new vehicle.  In that sense, it’s a rather rare vehicle.  If this WAS built from new parts, then $25,000 isn’t all that high of price to have someone built a vehicle from scratch.  Including the cost of labor, building a jeep from scratch with new parts would likely land in the $25000 realm.  The ad includes lots of pics.

“You are looking at a titled re-creation of a MUTT M151/ army jeep. In 1999 this Jeep was built in Clearwater, Florida for a jeep enthusiast that had a home in Utah as well. It was shipped to Utah in 2002 and used for local driving and recreational use. This vehicle has also won a few trophies in local car shows. In 2009 the Jeep was shipped back to his home in Palm Beach, Florida where it sat in storage. This vehicle is like new with only 400 actual miles. Everything is in working order and it runs like a 400 mile Jeep should. This vehicle cost over $25,000.00 to have built. There loss is your gain. I am only asking $11,900.00. I am open to all reasonable offers.”

[fb_button]
 
To Top

1957 DJ-3A Tucson, AZ **SOLD**

• CATEGORIES: DJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1600.

“This is a DJ3A jeep that’s had the CJ2A 4X4 Drive train installed. Original 4-134 flathead runs great, T90 3 spd trans and D18 2 spd transfer appear to be good. I drained and replaced the oil and it was Not milky (no water). I took the original (rare) DJ hard top off to use it for hunting, I still have it and it goes with the Jeep. Replaced the rubber brake lines and flush the brake system so it has brakes again. Original 16″ wheels with the spare. It is currently licenced but need the taillights fixed (wires) to be street legal. It’s a cool Jeep, just don’t have the time or money to do it justice (and space).”

[fb_button]
 
To Top

1962 DJ-3A Surrey? Kent Island, MD **SOLD**

• CATEGORIES: DJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: Was $3600. **SOLD**

This looks good.

“1962 military style, 2 wheel drive, three on the tree, 4 cylinder flat head, rear seat, upholstery in great condition, garage kept past 18 years, 52000. miles, no rust…great shape! A fun ride !!”

[fb_button]
 
To Top

1965 DJ-3A Kansas City, KS **SOLD**

• CATEGORIES: DJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4500.

Here’s a DJ-3A in good condition.  I’ve only seen 2 other ’65s.

“Amazing but no rust ever or anyplace. It’s been sitting for a few years and has bad gas in it and doesn’t want to stay running. Flathead inline 4 with floor shift three speed. Fun time at the parade or cruise.”

[fb_button]
 
To Top

1954 CJ-3B Silt, Co *SOLD*

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: Was $2100. **SOLD**

This might be a good price.  The top looks decent.

“54 Willys.Good project jeep. New tires, cloth top, rollbar, gas tank, front seats. Still needs mechanical work”

[fb_button]
 
To Top

Year? CJ-2A Ceres, Ca **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2000.

Desert dogs on some old steel rims — classic.

“Has small block chevy engine 4 wheel drive needs work but it runs good if you like to know more 2,000 O/B/O”

[fb_button]
 
To Top

MB/GPW Body Parts Bay Area, Ca

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

No pics.  Not exactly sure what’s here …

“1941 – 1945 WILLYS/FORD SHEETMETAL, I HAVE THE COMPLETE FRONT END, THAT MEANS FROM THE COWL FORWARD, I ALSO HAVE THE COWL, I HAVE FRONT STEER AXLE WITH LEAF SPRINGS, I HAVE EXTRA SPRINGS ALSO. CALL ME AND MAKE ME AN OFFER, ALL SHEETMETAL IS ORIGINAL NOT AFTERMARKET, SHEETMETAL IS IN EXECELLENT CONDITION, FRONT AXLE IS IN EXCELLENT CONDITION ALSO. 605-999-4842 OR EMAIL ME I WILL BE SCRAPPING THIS IF I DONT SELL WITHIN 1 WEEK. I HAVE NO USE FOR IT AND IT IS JUST TAKING SPACE.”

http://sfbay.craigslist.org/nby/pts/1947743538.html

[fb_button]
 
To Top

1953 M-38A1 Evanston, WY **SOLD**

• CATEGORIES: M-38A1 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1700.

Brett spotted this deal.  This includes a Winch!  It looks like a great price.

“This has had a 283 chevy engine swap, it still has the jeep three lever transfercase and the transmission. The engine has new ignition and exhausts. clean older jeep. It also has an 8000 pound winch and a tow bar.”

[fb_button]
 
To Top

1953 Wagon Tampa Bay, Fl **SOLD**

• CATEGORIES: Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

This appears pretty solid for a east coast wagon.  It might be a good price.

“This jeep has been in my family since 1963 and until now its had a place to stay. interior was redone in late 90″s. engine is complete but hasn’t been started in a few years, have some parts also. Willing to take partial trade doe guns or boat.”

[fb_button]