While looking for a clean example of the Willys Overland script, I came across an auto-created page, a page of complete jibberish that attempts to make the owner money by getting hits and advertising google and craigslist ads (therefore, I won’t provide a link). However, on this same page I found this odd CJ-5. It looks like the picture is somewhere in southern Utah. Anyone seen this elsewhere?
1948 CJ-2A Conifer, CA **SOLD**
UPDATE: **SOLD** Was $1600
“1948 Willy’s CJ-2A project for sale with original title. $1,600.00 OBO. Custom 2x4x120 wall frame. 2”x120 DOM 6 point roll cage w/ UHMW roof. 1.5”120 DOM engine, winch protection and rock sliders. I still original hood and fenders. I also have a custom aluminum hood built to fit a Chevy 350 engine. The body and chassis comes with a 15 gallon fuel cell holly blue fuel pump, American auto wire harness, steering column, Toyota brake booster and 1 ton gm master cylinder, 2 RCI seat including covers, front leaf springs for a V8 application, 4” TJ coils for the rear and 18” bilstien shocks. A set of 39.5x15x15 TSL super swampers mounted on 12x10x15 rock crawler steel wheels 8on 6.5 Can be added for $700.00 ”
1952 Wagon Hayward, Ca $2000
It’s dirty and there’s a dent in the left rear corner, but otherwise it looks solid.
“6 Cyl flathead complete and restorable. If interested reply to fredlela@aol.com. More pictures available upon request”
1942 MB Reedley, Ca $2750
Seller is moving to Nevada this sunday and must sell it.
“42 Willys Jeep project car. I am moving to Nevada this Sunday and can’t take it with me. I have the original bumper and windshield as well as over $1500 in new and used parts that will go along with it. Please contact me ASAP if you are at all interested. Must sell. Asking $2750 o.b.o.”
1943 MB Warren, Me **SOLD**
1946 CJ-2A Lodi, Oh $1500
This might be a good deal. The tires appear in good shape.
“SELLING MY 46′ WILLY’S CJ2A JEEP; BODY PANELS INTACT; PLEASE NOTE: ************NO TITLE*************** ; NEW 31″ X 16.5 SUPER SWAMPER TIRES; NEW SHOCKS; NEW SPINDLES; NEW DRIVE SHAFTS; NEW RIMS; NEW, RE-BUILT TRANSMISSION W/300 MILES ON IT; TONS OF TORQUEk; RUNS GREAT, BRAKES WORK BUT NEED TO BE BLED; ONLY USED TO HAUL FIREWOOD FROM OUR WOODS, MOVED TO NEW PLACE- NOW WE GOT A FURNACE!!! REALLY A SUPER DEAL FOR THE MONEY. IF INTERESTED OR TO SEE CALL JOE AT 440-552-8894 THANK YOU”
1949 CJ-2A Puyallup, Wa $3700
This appears solid.
“1949 Willy’s Jeep w/ 302 V8, good 33″ tires, winch, hard top and doors included. Call for details. No trades. $3700 OBO Joe 253-250-1728”
1946 CJ-2A Snohomish, Wa $5000
UPDATE: Still Available
(06/13/09)This jeep sounds like it’s ready for the road and trails.
“1946 willys CJ2A excellent condition, warn winch, 4 wheel drive works excellent. Owned for 9 years well maintained. Good paint, good interior, body in great shape. Warn overdrive, lockers front and rear, 160 amp alternator, coil overs on rear, CB, high back bucket seats, tilt wheel, full roll cage, diamond plate job box. Lots of extras, any questions please feel free to call and see. Don at 425-359-1060. Runs and drives great. Original engine and running gear. Tow bar included. Nerf Bars. Thanks For looking. Drive this classic Jeep home today for only $5000.00 Cash.”
1957 FC-150 Jamestown, NC **SOLD**
UPDATE: **SOLD** Was on eBay.
This is rough, but it has both a PTO Winch and Newgren Hitch.
“You are bidding on a early model Jeep FC 150 parts truck that has a Newgren Company 3 pt. hitch. Model #BL 4770. The truck also has a Ramsey bed mounted PTO Winch set up with the pto and lever still installed, including chains to the sprockets. The truck had this rare combination installed when bought and was used on a farm. At one point the Jeep had motor trouble, and the truck was left sitting. The Newgren hitch is still installed and the truck would work great as a “library vehicle” to see how to install it onto your Willys CJ2A, CJ3, FC150, FC170 ,or CJ3B. The hitch is in rough condition, but the basic parts are there to use, refurbish, or use as a pattern. The original hydraulic ram and pump were were not installed on the truck when I purchased the Jeep. You can use a 12 volt pump and ram from Northern Tool, Grainger, etc. to power the hitch or look for an original. Some folks have also used the snow plow hydraulic pumps from Willys vehicles that are a little more common.
Please look at the photos carefully (the red cj2a is NOT INCLUDED!) You are getting a good starting point for an ultra rare 3 pt. hitch setup for a Willys Jeep. The condition is such that you will need to rebuild, refurbish, and add/replace parts. You also get a pto winch with the attachments to bed mount it, the pto attached to the transfer case and the control lever. The rest of the truck is included, but would only be good for some parts. The truck is rolling on its own and I can help load on a trailer.
To aid you with restoration, FARMJEEP>COM has an extensive write up on the restoration, installation, and additional parts sourcing of a very similar hitch. Please look at theses pictures closely. The condition requires work, but could add remendous value to your Willys or Jeep when installed and refurbished. Still has the original Newgren Comapny tag.”
1962 Truck Grand Rapids Area, Michigan $16,500
Appears very nice!
“YOU NEED TO SEE THIS ONE!! California truck with 18,000 actual miles. Completely restored…. won’t last long guys! If these photos dont show I will send some. ”















