Monthly Archives: May 2012

To Top

1961 FC-170 Ohio **SOLD**

May 8, 2012 • CATEGORIES: FC150-FC170-M677 • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $7000

Mark has this over at jeeptruck.com.

“I am selling my 1961 Jeep FC170.
Engine: L226 Flat Head 6 cylinder, re-gasket and bearings in 2006
Trans: T98A 4-speed, new Kevlar clutch in 2006
Dana 18 T-case rebuilt in 2006
Dana 44 closed knuckle front diff 4:88 ratio
Dana 53 Rear diff 4:88 ratio
Vacuum assist brakes
Wood stake bed with removable sides and ends
Awesome Marine grade chrome and stainless exhaust stacks that are for real and working
In 2005 -2006 this Jeep went through an engine rebuild, new upgrade wiring, t-case rebuild, front differential knuckle seals, bearings, Rancho shocks. I have not done any restoration to the body, it is the same as I acquired it.

A little history of this truck: previous owner purchased it at an FBI auction in Florida. It had 7″ of lift on it. They brought it back to Toledo, Ohio where it sat behind a building getting rocks thrown at it, where we bought it. I got it running within 3 days with carb rebuild but only on 5 cylinders. Took out the scary lift kit and engine the next winter and went through it along with the transfer case and clutch. The wiring was mouse eaten in places so a total rewire was in order. Then came brake lines, M/Cylinder, fuel lines (3/8″ stainless), front knuckle seals and wheel bearing pack. Amsoil 80w90 in all trans, t-case, front and rear diffs.

It’s not all in original form or function, some improvements have been made to the electrical and mechanicals. but it is a driver and head turner whenever I blow the dust off it here in Toledo. I’ve had it to the GM Powertrain Park N Shine show many times and have been blessed to meet a few of the people that worked at Jeep that remember working the assembly line building them, just to see the expression on their faces to see one again. I always let them or the young ones sit in it.

Price: $7,000 or Best Offer

Location: Ohio

Please contact Wesley at:

Phone: (419) 320-6064 (after 6 please…..)

e-mail: MojoDogParts@yahoo.com

or

4wdv@buckeye-express.com”

http://www.jeeptruck.com/bd/sale/adb178/adb178.html

[fb_button]
 
To Top

1946 CJ-2A Langley, BC, Canada $900

May 8, 2012 • CATEGORIES: CJ-2A • TAGS: . This site contains affiliate links for which I may be compensated.
0

I hope someone decides to restore this one.  It looks to solid to turn into a rock crawler.

“This is a project and is missing some parts , perfect for a rock crawler build or to put newer running gear into. I just have too many other projects currently

Does have a registration and I do have some extra parts that I can sell to like a dana 300 for $250
and a 2010 ecotec 2.2L engine for$ 700 with wiring and pcm.
power steering box and tilt column$ 150

[IMG]http://img.photobucket.com/albums/v655/johny5/007Small.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v655/johny5/008Small.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v655/johny5/017Small.jpg[/IMG]”

http://vancouver.en.craigslist.ca/rds/cto/3002007970.html

[fb_button]
 
To Top

1956 Truck Blodgett, Or $1200

May 8, 2012 • CATEGORIES: Willys Trucks • TAGS: . This site contains affiliate links for which I may be compensated.
0

This does look solid.

“This is a good, solid project truck! Willys 6 cylinder. Is currently non-running, but does turn. Body is very straight with no serious issues. Excellent restoration project. Call Furniture Restoration Center & ask for Steve: 541-929-6681”

http://corvallis.craigslist.org/cto/3002080590.html

[fb_button]
 
To Top

1947 CJ-2A Ocala, FL **SOLD**

May 8, 2012 • CATEGORIES: CJ-2A • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $8000.

This sounds like it has had lots of work done.  It might be a solid runner.  It appears to have been changed to a single lever transfercase.

“1947 Willys Jeep CJ2a —— orange with als liner srayed inside interior floors and rails , interior excellent —- Converted to v-6 Buick motor with 3 speed trans with overdrive unit ………. new parts installed on vehicle include brakes , master cyclinder , lines , shoes , wheel cyclinders , axle seals and all related items to install above , new trans and transfer case purchased from Herm the overdrive guy , last year , 200 plus miles since install , all new guages , fuel tank , sending unit , new shocks all around , spring bushings. new high torque starter , custom made driveshaft , runs excellent carb has been rebuilt and all ignition componets were replace within the last year ………..I have all documents to show repairs if needed ( over $7000.00 spent on it this year alone) …….. runs excellent and rides like a dream….. ”

[fb_button]
 
To Top

1953 M-170 Grand Junction, CO **SOLD**

May 8, 2012 • CATEGORIES: M-170 • TAGS: . This site contains affiliate links for which I may be compensated.
2

UPDATE:  **SOLD** Was $3750.

Runs and drives, but needs polish at the very least.  Looks like a good foundation for a restoration.

“this is a very rare willys, only 4500 ever made. based on m38a1. runs and drives, has lots of original and hard to find ambulance only parts. would be a great full restoration project.”

[fb_button]
 
To Top

1954 CJ-3B Phoenix, AZ **SOLD**

May 8, 2012 • CATEGORIES: CJ-3B • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $4200

I’m a sucker for a slotted rims.  Looks like a solid jeep.

“1954 CJ3B Willys Jeep, seats have been redone, new gauges, new shocks, new brakes, new exhaust, upgraded to 12 volt system.”

[fb_button]
 
To Top

Year? Fiberglass Flattie Springville, Pa $2000

May 8, 2012 • CATEGORIES: CJ-3A • TAGS: . This site contains affiliate links for which I may be compensated.
0

There’s some value, but hard to tell just how much work is done.

“Willys jeep(( no title)) with Buick 225 V6 , T190 Trans, fiberglass body,aluminum wheels,headers,6 point roll cage, Painless wiring panel, tow bar and engine (low mileage) with aluminum intake. Frame and new fiber glass body are undercoated inside and out Tub is painted “Swift red” while the front end (not pictured but in excellent shape) needs painted. I no longer have time for this project and would like to see it go to an ambitious person. The body consisting of tub, fenders, grille, hood, and windshield are well worth the asking price of the complete vehicle. 2000 Neg. Serious inquires only will consider many trades please contact via email. Thank You.”

http://scranton.craigslist.org/cto/3003832080.html

[fb_button]
 
To Top

Year? Wagon Rock Crawler Santa Barbara, Ca $17,000

May 8, 2012 • CATEGORIES: Willys Wagons • TAGS: , . This site contains affiliate links for which I may be compensated.
0

A reader forwarded this very unusual wagon.  It has quite the exoskeleton cage!

“I’m selling the best rock crawler I’ve ever owned, Rubicon anyone? No problem. This thing is a fully welded tubular frame, 454 Fuel Injected Suburban 2500 drive train with rear mounted engine and oil coolers, 44 inch Superswapers, welded Dana 70 rear axle with dump truck drum breaks Dana 60 front, prodfessionally CAD’ed 4-link full coil over suspension with fox racing shocks, aluminum fuel cell in rear, exo roll cage just painted, Newer XRC 10k lb winch mounts in front or rear, 4 air ride seats. This thing is full on if you’re ready to do the Rubicon or the Hammers this will do it. Over $30,000 invested in parts alone, selling due to economy. Asking 17,000 serious inquiries only! -Erik”

http://santabarbara.craigslist.org/cto/3000486087.html

[fb_button]